Questions about a DWM possible rework

JMV375 · 07-03-2007, 12:12 AM

DWM ser. # 9825 h or 9825 k, 9mm , 4", all matching. Has number "2" and letter "C" stamped on frame under the sideplate. Any idea as to date of maufacture...?

Has DWM eagle acceptance proof on the left side of toggle. No chamber date or chamber markings.

No Crown/N proof marks anywhere. No markings on right side of gun anywhere. Also has 8.83 stamped on underside of barrel below serial number.

Holster is stamped STERN & Co OFFENBACHAM 1915 with wood bottom mag and loading tool... straight winged eagle with F 3 or P 3 below eagle.

Any info is appreciated....I'll try and post photos later.

JMV375
Macomb, MI

MFC · 07-03-2007, 01:28 AM

The alphabet commercial series started at S# 2000 i, and is almost always 7.65 cal., so this one is a military. Probably scrubbed of proofs and a chamber date for sale on the commercial market. Many military lugers were reworked in the 20's.
That's my guess,
Mike C.

MFC · 07-04-2007, 01:07 AM

JMV375,
Even though you editted your post and added "or 9825 k" which falls into the alphabet commercial range, I'll still go with my first guess.
Mike C.

Lugerdoc · 07-04-2007, 10:38 AM

I would bet that the swe/F or P 3, is really an E/63. It's possible that it's a repro tool, as Sarco is selling some phony E/63 marked tools. TH

JMV375 · 07-04-2007, 11:36 AM

After closer examination it is an E/63...eyes are getting older and needed alittle help with the magnification.

07-03-2007, 12:12 AM	#1
JMV375 User Join Date: Apr 2007 Location: Macomb, MI Posts: 83 Thanks: 0 Thanked 0 Times in 0 Posts	Questions about a DWM possible rework DWM ser. # 9825 h or 9825 k, 9mm , 4", all matching. Has number "2" and letter "C" stamped on frame under the sideplate. Any idea as to date of maufacture...? Has DWM eagle acceptance proof on the left side of toggle. No chamber date or chamber markings. No Crown/N proof marks anywhere. No markings on right side of gun anywhere. Also has 8.83 stamped on underside of barrel below serial number. Holster is stamped STERN & Co OFFENBACHAM 1915 with wood bottom mag and loading tool... straight winged eagle with F 3 or P 3 below eagle. Any info is appreciated....I'll try and post photos later. JMV375 Macomb, MI

07-03-2007, 01:28 AM	#2
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	The alphabet commercial series started at S# 2000 i, and is almost always 7.65 cal., so this one is a military. Probably scrubbed of proofs and a chamber date for sale on the commercial market. Many military lugers were reworked in the 20's. That's my guess, Mike C. __________________ Mike C.

07-04-2007, 01:07 AM	#3
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	JMV375, Even though you editted your post and added "or 9825 k" which falls into the alphabet commercial range, I'll still go with my first guess. Mike C. __________________ Mike C.

07-04-2007, 10:38 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	I would bet that the swe/F or P 3, is really an E/63. It's possible that it's a repro tool, as Sarco is selling some phony E/63 marked tools. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

07-04-2007, 11:36 AM	#5
JMV375 User Join Date: Apr 2007 Location: Macomb, MI Posts: 83 Thanks: 0 Thanked 0 Times in 0 Posts	Luger tool After closer examination it is an E/63...eyes are getting older and needed alittle help with the magnification.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode