G Date Loads

Bluto · 09-17-2012, 07:49 AM

After reading on this forum about the good remarks for AA#5, I went out and bought a pound. I cast my own leads and they are roughly 125 grains. I tried 5 grains of #5 and it seemed like it was just not quite enough. What are some of the loads that you might use in AA#5? Thanks in advance.....

nukem556 · 09-17-2012, 09:28 PM

try 5.8...should work the action well, and wont be too high velocity for the lead bullets. I've used 6.2-6.4 with FMJs

Sieger · 09-18-2012, 02:15 AM

Quote:

Originally Posted by Bluto

After reading on this forum about the good remarks for AA#5, I went out and bought a pound. I cast my own leads and they are roughly 125 grains. I tried 5 grains of #5 and it seemed like it was just not quite enough. What are some of the loads that you might use in AA#5? Thanks in advance.....

Hi:

Search my name and you will find a great load compination for lead and AA#5, in fact, my most accurate load to date.

Search "Excellent Lead Bullet Load for 9mm"

My load was 5.4 grs of AA#5 behind a RCBS truncated cone 124 grain lead bullet at 29mm OAL.

Sieger

09-17-2012, 07:49 AM	#1
Bluto User Join Date: Jun 2012 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	G Date Loads After reading on this forum about the good remarks for AA#5, I went out and bought a pound. I cast my own leads and they are roughly 125 grains. I tried 5 grains of #5 and it seemed like it was just not quite enough. What are some of the loads that you might use in AA#5? Thanks in advance.....

09-17-2012, 09:28 PM	#2
nukem556 User Join Date: Jul 2010 Location: Irmo, SC Posts: 625 Thanks: 35 Thanked 168 Times in 107 Posts	try 5.8...should work the action well, and wont be too high velocity for the lead bullets. I've used 6.2-6.4 with FMJs