S-42 1938 price check ?

falanga92 · 12-02-2006, 01:38 PM

Hello, I am a new member !

My friend has S-42 Luger dated 1938, with black plastic grips (so called black widow) , non maching pistol, the frame has 1 number and other parts are matching. I supose that frame is made later during the war.

The condition is very good.

What is the value of this gun ?

Thank you !

Best regards !

Edward Tinker · 12-02-2006, 01:51 PM

hrvoje ???

Value depends on where you live.

As non matching, it is worth $300-$600 in the US. Without pictures it is impossible to be anymore exact than this.

Welcome to the forum, although you placed this in the right area, I will move it to New Collector area.

Ed

falanga92 · 12-03-2006, 04:59 PM

Thank you !

Here is details.

hrvoje ???

Best regard !

Oh I forget, it is navy slide and barrel, as you can see.

Steinar · 12-03-2006, 05:11 PM

Welcome to the forum

Where I live it would be hard to sell it for more than 300USD, the question is where you live.

The grips looks nice and crisp, I would consider cleaning them gently. Is the magazine original? ..hard to tell from the pictures.. I guess that would boost the value some.

Regards

Steinar

Edward Tinker · 12-03-2006, 07:19 PM

hello again, your NAME says you are hrvoje on your profile.

Why do you say it has a navy slide and barrel?

The condition is fairly rough actually, in the USA it would sell for around $450-$550, maybe a bit mroe.

ed

falanga92 · 12-04-2006, 03:51 AM

Quote:

Why do you say it has a navy slide and barrel?

Isn't third eagle on pic.kriegsmarine marking?

jamese · 12-04-2006, 04:33 AM

The frame was made in 1941 or 42
The top half is most likely 1938

The eagle is a Mid Army test proof and the E/63 and E/83 are acceptance stamps.

The gun is a parts gun w/after market mag, if the grips are originial the total value would be $500 to $600

Jim

John Sabato · 12-04-2006, 09:59 AM

If at all possible, I would like to see some closeup clear focus photos of both insides and outsides of the grips. These do not appear to be original "black widow" type bakelite grips. There is no visible border on the grips bottom

Steinar · 12-04-2006, 12:04 PM

Thought they where dirty wooden grips at first glance.. Think you are right John, doesn't look like BW grips.

falanga92 · 12-06-2006, 01:25 PM

Here is pic of grips, inside, now I can see, they are not original !

And mag. too !

Best regards !

byf43 · 12-07-2006, 02:05 AM

This type of magazine, I can't place it in P08 production? When was this type used? I thought alloy buttom magazines were the only ones in use on late 30s Mauser 08s?

falanga92 · 12-07-2006, 08:10 AM

Who made this grips, and when ?

The same question for the mag.

Edward Tinker · 12-07-2006, 11:22 AM

If the grips are repro, no one would have a clue. The magazine pictures are too dark to tell, although it appears to be one of the newer repro navy mags (if it is the same one in the pictures in the luger itself above).

falanga92 · 12-08-2006, 03:09 AM

I' ll put better pic.

Is there anyone who saw grips like this one?

Thanks for the answers .

Steinar · 12-08-2006, 03:54 AM

Have no idea.. but from the poor fitting close to the grip screw, they could be taken from a non-firing replica.

https://secure.countywebsite.com/cgi...egory_Code=TC2

12-02-2006, 01:38 PM	#1
falanga92 User Join Date: Dec 2006 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	S-42 1938 price check ? Hello, I am a new member ! My friend has S-42 Luger dated 1938, with black plastic grips (so called black widow) , non maching pistol, the frame has 1 number and other parts are matching. I supose that frame is made later during the war. The condition is very good. What is the value of this gun ? Thank you ! Best regards !

12-02-2006, 01:51 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	hrvoje ??? Value depends on where you live. As non matching, it is worth $300-$600 in the US. Without pictures it is impossible to be anymore exact than this. Welcome to the forum, although you placed this in the right area, I will move it to New Collector area. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

12-03-2006, 05:11 PM	#4
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Welcome to the forum Where I live it would be hard to sell it for more than 300USD, the question is where you live. The grips looks nice and crisp, I would consider cleaning them gently. Is the magazine original? ..hard to tell from the pictures.. I guess that would boost the value some. Regards Steinar __________________ Previously known as Morgan Kane

12-03-2006, 07:19 PM	#5
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	hello again, your NAME says you are hrvoje on your profile. Why do you say it has a navy slide and barrel? The condition is fairly rough actually, in the USA it would sell for around $450-$550, maybe a bit mroe. ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

12-04-2006, 04:33 AM	#7
jamese User Join Date: Jan 2003 Location: South Florida Posts: 789 Thanks: 0 Thanked 84 Times in 34 Posts	The frame was made in 1941 or 42 The top half is most likely 1938 The eagle is a Mid Army test proof and the E/63 and E/83 are acceptance stamps. The gun is a parts gun w/after market mag, if the grips are originial the total value would be $500 to $600 Jim __________________ The "truth" is a matter of Perception

12-03-2006, 04:59 PM	#3
falanga92 User Join Date: Dec 2006 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Thank you ! Here is details. hrvoje ??? Best regard ! Oh I forget, it is navy slide and barrel, as you can see.

12-04-2006, 09:59 AM	#8
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	If at all possible, I would like to see some closeup clear focus photos of both insides and outsides of the grips. These do not appear to be original "black widow" type bakelite grips. There is no visible border on the grips bottom __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-04-2006, 12:04 PM	#9
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Thought they where dirty wooden grips at first glance.. Think you are right John, doesn't look like BW grips. __________________ Previously known as Morgan Kane

12-06-2006, 01:25 PM	#10
falanga92 User Join Date: Dec 2006 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Here is pic of grips, inside, now I can see, they are not original ! And mag. too ! Best regards !

12-07-2006, 02:05 AM	#11
byf43 User Join Date: Mar 2005 Posts: 69 Thanks: 0 Thanked 0 Times in 0 Posts	This type of magazine, I can't place it in P08 production? When was this type used? I thought alloy buttom magazines were the only ones in use on late 30s Mauser 08s?

12-07-2006, 08:10 AM	#12
falanga92 User Join Date: Dec 2006 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Who made this grips, and when ? The same question for the mag.

12-07-2006, 11:22 AM	#13
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	If the grips are repro, no one would have a clue. The magazine pictures are too dark to tell, although it appears to be one of the newer repro navy mags (if it is the same one in the pictures in the luger itself above).

12-08-2006, 03:09 AM	#14
falanga92 User Join Date: Dec 2006 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	I' ll put better pic. Is there anyone who saw grips like this one? Thanks for the answers .

12-08-2006, 03:54 AM	#15
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Have no idea.. but from the poor fitting close to the grip screw, they could be taken from a non-firing replica. https://secure.countywebsite.com/cgi...egory_Code=TC2 __________________ Previously known as Morgan Kane