bulgarian luger 1900 7.65 mint - estimate please

bulgarianluger · 11-24-2003, 10:49 AM

Hi, my brother in Greece acquired a Bulgarian Luger 1900 , with a 6-digit serial# (20xxx) with all numbers matching (even the handles) w/original 7.65 barrel in mint condition. Not reworked.

He is interested in selling.

I would greatly appreciated it if any of you Luger experts could take a shot at estimating its value (I will post pictures as soon as I have them).

Also, is anybody in this board in Europe?

Thank you in advance,
YL
[email protected]

Lugerdoc · 11-25-2003, 01:58 PM

Most of the original configuration 7.65x120mm long frame lugers that I've seen in the USA were excellent restorations done for the last 30 years or so by Mike Krause. Almost all long frame 7.65mm Bulgarians that were still in their hand during WW2 were faced off and short reciever type 9x100mm barrels were installed. To be sure that one of these was possibly correct the barrel length should definately be 120mm, not the short received type of 118mm. TH

11-24-2003, 10:49 AM	#1
bulgarianluger New User Join Date: Nov 2003 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	bulgarian luger 1900 7.65 mint - estimate please Hi, my brother in Greece acquired a Bulgarian Luger 1900 , with a 6-digit serial# (20xxx) with all numbers matching (even the handles) w/original 7.65 barrel in mint condition. Not reworked. He is interested in selling. I would greatly appreciated it if any of you Luger experts could take a shot at estimating its value (I will post pictures as soon as I have them). Also, is anybody in this board in Europe? Thank you in advance, YL [email protected]

11-25-2003, 01:58 PM	#2
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Most of the original configuration 7.65x120mm long frame lugers that I've seen in the USA were excellent restorations done for the last 30 years or so by Mike Krause. Almost all long frame 7.65mm Bulgarians that were still in their hand during WW2 were faced off and short reciever type 9x100mm barrels were installed. To be sure that one of these was possibly correct the barrel length should definately be 120mm, not the short received type of 118mm. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode