Problem staying logged in

sdmark777 · 03-13-2022, 11:14 AM

Anyone else having this problem. Started a few days ago and persists. Luger Forum does not stay logged in. Even though I check remember me. I go to the message board and bring up a thread. Then when I click back on message board it has everything locked, so I have to log in every time! Very frustrating. I completely exited Luger Forums and tried all over again. I still makes me log in every time I click message board.

Mac Cat · 03-13-2022, 11:19 AM

Yes. It seems to be up and down a lot this week more than usual.

sdmark777 · 03-13-2022, 11:26 AM

Thanks, I have not experienced this issue before very frustrating. Thought it might be a Russian hack!

jeb111 · 03-13-2022, 11:49 AM

Same going on with me. Just started a few days ago.
Jim

sheepherder · 03-13-2022, 02:03 PM

Quote:

Originally Posted by jeb111

Same going on with me. Just started a few days ago.
Jim

LugerForum was down a few days ago, for some time [hours?]. I put it down to John D. maintenance...

May have a slight glitch now...I had to sign in to make this post, unusual for me...I had logged in as usual this morning w/no problem...

Edward Tinker · 03-13-2022, 02:22 PM

Not affecting me, usually this is an issue with your cookies.
Clear all the cookies for the site, if you clear ALL cookies, you'll have to sign in.

Clear cookies, restart, sign in

aldo35 · 03-13-2022, 04:51 PM

I deleted rowsing history and cookies still problem

jeb111 · 03-13-2022, 05:32 PM

working fine for me now

cirelaw · 03-13-2022, 07:37 PM

Working Now~ TKS you both!

Mac Cat · 03-13-2022, 08:47 PM

Yeah, it's been fine for the last few days, so I figured it was some maintenance.
No worries, here.

Thanks for all of you who volunteer and for the WebMaster - I appreciate your talents and time.

kkiley · 03-13-2022, 09:28 PM

Yes has been happening for the last two days ?

MikeP · 03-15-2022, 04:26 PM

Same-same for me. Not going to get upset over it.

John D. · 03-15-2022, 05:55 PM

I think it's because certain browsers don't like the auto switch from a non-secure to a secure site...?

When I saw this thread - I had a good "head scratch" trying to figure it out - but, when I opened it up with the "www" link - it didn't swap over automatically.??

Soooo. I just added a few lines of text to the HTTPS redirect code - and let me know in this thread - if you have any further issues, OK? You should see a padlock - or "secure" or whatever your browser shows as a "secure site, regardless of how you come into the site/forums (yes - there are multiple entry points), as to be expected with a site that has been around for over twenty years

My best to all...!

John D.

Mac Cat · 03-15-2022, 06:03 PM

Thanks John.
I just refreshed my browser and confirmed it's got the padlock (secure) !
(Mac OS 12.x Monterey with Safari 15.3, Chrome ver 99.0.4844.51, and Firefox 97.0)
All current.

I wasn't getting kicked out, I was having trouble getting logged in, but that was last week.
I haven't had any hiccups this week.

Cheers!

John D. · 03-15-2022, 06:09 PM

Thanks buddy!! Glad it's working for you - and hopefully the others in this thread as well...

Yep - a few days ago when the ISP had an issue with a router upstream, I figured "it was time" to drop the new code into the forum/community... While I wish there wasn't a hiccup in it, I guess there was for a few?

Anywho - again - thanks for the feedback and encouragement Mac Cat!

John

sdmark777 · 03-15-2022, 07:49 PM

I cleared cookies, did not work. What ever you did John fixed it! I logged out, logged in and all is back to normal. Thanks, Mark

John D. · 03-15-2022, 07:58 PM

Perfect - thanks Mark!!

I've got finger's x'ed that the forced browser swap from non-secured to secured will work for all - and glad it worked for you!

Any thanks for the feedback and input, Mark!

John D.

sheepherder · 03-15-2022, 08:11 PM

I had not even noticed it was https// now instead of http//...But Seamonkey [Mozilla] 2.53.11 swapped seamlessly...Or so it seems...But I will replace my bookmark anyway...

John D. · 03-15-2022, 08:21 PM

Thanks for the info sheepherder..!

Hopefully, no one else is stuck in the crack between http and https - or so I hope..?!

Anyway...

John D.

MikeP · 03-16-2022, 01:53 AM

Working foe me, now.

03-13-2022, 11:14 AM	#1
sdmark777 User Join Date: Apr 2018 Posts: 288 Thanks: 695 Thanked 672 Times in 174 Posts	Problem staying logged in Anyone else having this problem. Started a few days ago and persists. Luger Forum does not stay logged in. Even though I check remember me. I go to the message board and bring up a thread. Then when I click back on message board it has everything locked, so I have to log in every time! Very frustrating. I completely exited Luger Forums and tried all over again. I still makes me log in every time I click message board.

03-13-2022, 04:51 PM	#7
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 343 Thanks: 2,223 Thanked 146 Times in 76 Posts	delete cookies I deleted rowsing history and cookies still problem

03-15-2022, 08:11 PM	#18
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,183 Thanks: 1,400 Thanked 4,442 Times in 2,330 Posts	I had not even noticed it was https// now instead of http//...But Seamonkey [Mozilla] 2.53.11 swapped seamlessly...Or so it seems...But I will replace my bookmark anyway... __________________ I like my coffee the way I like my women... ...Cold and bitter...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-13-2022, 11:19 AM	#2
Mac Cat Lifer Lifetime Forum Patron Join Date: Apr 2015 Location: Austin, Texas Posts: 731 Thanks: 2,095 Thanked 610 Times in 329 Posts	Yes. It seems to be up and down a lot this week more than usual.

03-13-2022, 11:26 AM	#3
sdmark777 User Join Date: Apr 2018 Posts: 288 Thanks: 695 Thanked 672 Times in 174 Posts	Thanks, I have not experienced this issue before very frustrating. Thought it might be a Russian hack!

03-13-2022, 11:49 AM	#4
jeb111 Patron LugerForum Patron Join Date: May 2018 Location: wyoming Posts: 277 Thanks: 712 Thanked 331 Times in 133 Posts	Same going on with me. Just started a few days ago. Jim

03-13-2022, 02:22 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,033 Thanked 4,533 Times in 2,093 Posts	Not affecting me, usually this is an issue with your cookies. Clear all the cookies for the site, if you clear ALL cookies, you'll have to sign in. Clear cookies, restart, sign in

03-13-2022, 05:32 PM	#8
jeb111 Patron LugerForum Patron Join Date: May 2018 Location: wyoming Posts: 277 Thanks: 712 Thanked 331 Times in 133 Posts	working fine for me now

03-13-2022, 07:37 PM	#9
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Working Now~ TKS you both!

03-13-2022, 08:47 PM	#10
Mac Cat Lifer Lifetime Forum Patron Join Date: Apr 2015 Location: Austin, Texas Posts: 731 Thanks: 2,095 Thanked 610 Times in 329 Posts	Yeah, it's been fine for the last few days, so I figured it was some maintenance. No worries, here. Thanks for all of you who volunteer and for the WebMaster - I appreciate your talents and time.

03-13-2022, 09:28 PM	#11
kkiley User Join Date: Sep 2012 Location: maryland Posts: 32 Thanks: 49 Thanked 23 Times in 12 Posts	Yes has been happening for the last two days ?

03-15-2022, 04:26 PM	#12
MikeP User Join Date: Jun 2002 Location: ILL Posts: 686 Thanks: 36 Thanked 452 Times in 198 Posts	Same-same for me. Not going to get upset over it.

03-15-2022, 05:55 PM	#13
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	I think it's because certain browsers don't like the auto switch from a non-secure to a secure site...? When I saw this thread - I had a good "head scratch" trying to figure it out - but, when I opened it up with the "www" link - it didn't swap over automatically.?? Soooo. I just added a few lines of text to the HTTPS redirect code - and let me know in this thread - if you have any further issues, OK? You should see a padlock - or "secure" or whatever your browser shows as a "secure site, regardless of how you come into the site/forums (yes - there are multiple entry points), as to be expected with a site that has been around for over twenty years My best to all...! John D.

03-15-2022, 06:03 PM	#14
Mac Cat Lifer Lifetime Forum Patron Join Date: Apr 2015 Location: Austin, Texas Posts: 731 Thanks: 2,095 Thanked 610 Times in 329 Posts	Thanks John. I just refreshed my browser and confirmed it's got the padlock (secure) ! (Mac OS 12.x Monterey with Safari 15.3, Chrome ver 99.0.4844.51, and Firefox 97.0) All current. I wasn't getting kicked out, I was having trouble getting logged in, but that was last week. I haven't had any hiccups this week. Cheers!

03-15-2022, 06:09 PM	#15
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Thanks buddy!! Glad it's working for you - and hopefully the others in this thread as well... Yep - a few days ago when the ISP had an issue with a router upstream, I figured "it was time" to drop the new code into the forum/community... While I wish there wasn't a hiccup in it, I guess there was for a few? Anywho - again - thanks for the feedback and encouragement Mac Cat! John

03-15-2022, 07:49 PM	#16
sdmark777 User Join Date: Apr 2018 Posts: 288 Thanks: 695 Thanked 672 Times in 174 Posts	I cleared cookies, did not work. What ever you did John fixed it! I logged out, logged in and all is back to normal. Thanks, Mark

03-15-2022, 07:58 PM	#17
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Perfect - thanks Mark!! I've got finger's x'ed that the forced browser swap from non-secured to secured will work for all - and glad it worked for you! Any thanks for the feedback and input, Mark! John D.

03-15-2022, 08:21 PM	#19
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Thanks for the info sheepherder..! Hopefully, no one else is stuck in the crack between http and https - or so I hope..?! Anyway... John D.

03-16-2022, 01:53 AM	#20
MikeP User Join Date: Jun 2002 Location: ILL Posts: 686 Thanks: 36 Thanked 452 Times in 198 Posts	Working foe me, now.