LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Holster Forum

Reply
Thread Tools Display Modes
Unread 02-05-2010, 03:44 PM   #1
Nytebytes
User
 
Join Date: Feb 2010
Location: Florida, USA
Posts: 7
Thanks: 12
Thanked 0 Times in 0 Posts
Default 1939 Berlin "Odd" Holster?

Recently, I discovered some of my father's WWII items in a lock box. He was in the Battle of the Bulge, Dec 1944, and while fighting in the village of St. Vith, Belgium, captured a 1918 Luger from a German soldier who sadly found himself in my father's sights.

Although this captured Lugar was a 1918 Imperial firearm, the holster was a A. Fischer Berliin C2 1939. I have researched these 3rd Reich holsters and haven't found any that looks like this one.

First, it appears that someone (not my father) had removed the clip pouch from the from face of the holster, then trimmed the flap to remove the portion that covered the top of the spare clip. That is not my mystery.

What is unusual is, all the Military 3rd Reich holsters I have ever seen have a small tool pouch sewn into the inner flap as well as a leather tab to help extract the gun from the holster.

This holster does not have that pouch and there are no tell-tale thread marks where one would have been. The holster also doesn't have a leather tab for gun extraction but does have a heavy leather strap sewn on the inside surface of the flap that extends into the holster, curves and is sewn onto the inside face of the holster front face.

Although this holster is 71 years old, it has been in my father's a lock box since he returned in 1945 and is remarkable condition considering it was a battlefield aquisition. The leather is supple, very slight surface cracking on the exterior of the flap and the rest of the holster is extremely smooth and has highly polished leather surfaces.

I would like to ask if anyone has ever seen a holster fitting this description. I have attached 5 digital pictures to assist in the identification. Please feel free to email for additional pictures as I hope someone can assist me in it's identification or history of origin.

Best Regards,
Ed Vedder
[email protected]
Attached Thumbnails
Click image for larger version

Name:	IMG_0024.JPG
Views:	190
Size:	93.0 KB
ID:	11253  

Click image for larger version

Name:	IMG_0028.JPG
Views:	223
Size:	120.2 KB
ID:	11254  

Click image for larger version

Name:	IMG_0029.JPG
Views:	196
Size:	105.6 KB
ID:	11255  

Click image for larger version

Name:	IMG_0030.JPG
Views:	203
Size:	120.5 KB
ID:	11256  

Click image for larger version

Name:	IMG_0031.JPG
Views:	199
Size:	110.7 KB
ID:	11257  

Nytebytes is offline   Reply With Quote
Unread 02-05-2010, 04:00 PM   #2
suum cuique
User
 
suum cuique's Avatar
 
Join Date: Aug 2009
Location: MD / Currently about 9000 klicks east of the Potomac
Posts: 497
Thanks: 100
Thanked 47 Times in 35 Posts
Default

Who carved in the swastika?
__________________
Regards, Andy
There's No Place Like Home (Wizard Of Oz)
suum cuique is offline   Reply With Quote
Unread 02-05-2010, 04:12 PM   #3
Nytebytes
User
 
Join Date: Feb 2010
Location: Florida, USA
Posts: 7
Thanks: 12
Thanked 0 Times in 0 Posts
Default

I have no idea who carved the swastika. I remember seeing the swastika on the holster when I was a small child. I can only assume it was the soldier that carried it, but have no way of verifying that.

Just as a side note, I do have the original photograph taken of the "previous" owner laying beside a tank in St. Vith. My father took the photo moments after he aquired the gun.
Nytebytes is offline   Reply With Quote
Unread 02-05-2010, 04:26 PM   #4
Vlim
Moderator
Lifetime
LugerForum Patron
 
Vlim's Avatar
 
Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,989 Times in 1,205 Posts
Default

It looks like this holster started out as a standard military P08 holster, but that it was modified by cutting away parts of it.

If the photo shows the first owner with holster in situ, it should be enough to prove that he modified it. Modification of P08 holsters for easier access was mostly a GI hobby. The German army did not really approve or advocate the personal change of field gear.
Vlim is offline   Reply With Quote
The following member says Thank You to Vlim for your post:
Unread 02-05-2010, 04:31 PM   #5
Norme
Always A
Lifetime Forum
Patron
 
Norme's Avatar
 
Join Date: Jul 2009
Location: Colorado
Posts: 2,417
Thanks: 226
Thanked 2,603 Times in 933 Posts
Default

Hi, Welcome to the forum. Jerry Burney is our resident leather expert and I expect he will weigh in soon. It looks to me as if this holster has a replacement flap, which would explain the missing tool pouch. Also, the front of the holster has been cut down, eliminating the pull strap. Presumably this was done in the interest of a "fast draw". Evidently not fast enough for the original owner! Regards
Norme is offline   Reply With Quote
The following member says Thank You to Norme for your post:
Unread 02-05-2010, 05:32 PM   #6
alanint
User
 
alanint's Avatar
 
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
Default

If the front of the holster was cut down for quick access, it was very nicely done, with the edges buffed and rounded similar to a factory finish and a nice decorative line chasing the edge over its entire length!
alanint is offline   Reply With Quote
The following member says Thank You to alanint for your post:
Unread 02-05-2010, 06:09 PM   #7
George Anderson
Lifer
Lifetime Forum
Patron
 
Join Date: Jul 2002
Location: VA
Posts: 3,592
Thanks: 1,773
Thanked 2,529 Times in 787 Posts
Default

Interesting holster with a P38 type lift strap. Nothing about it indicates to me that it was ever a P08 holster. The tooled edging on the front testifies to it not having been cut down. I would hope that Klaus Merzbach would offer an opinion.
George Anderson is offline   Reply With Quote
The following member says Thank You to George Anderson for your post:
Unread 02-05-2010, 06:51 PM   #8
Don M
Patron
LugerForum
Patron
 
Don M's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
Default

The body of the holster looks very much like those manufactured for use with the 9-mm Dreyse by the Imperial Landgendarmerie. Examples of these are shown on p. 188 of HWIS and in the thread http://forum.lugerforum.com/showthread.php?t=21274. The flap is quite different and may have been a replacement as suggested by Norm. It apparently does not have the L.G. stamp found on the former Landgendarmerie holsters but I would not expect it on a holster manufactured in 1939.
__________________
Regards,
Don
[email protected]

Author of History Writ in Steel: German Police Markings 1900-1936
http://www.historywritinsteel.com
Don M is offline   Reply With Quote
The following member says Thank You to Don M for your post:
Unread 02-05-2010, 07:04 PM   #9
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,935
Thanks: 2,034
Thanked 4,533 Times in 2,093 Posts
Default

I can not add much, except to say that although a luger might fit in it, it is most likely like the gentlemen said above.

I can say that I have been to St Vith on several occassions; as I toured the path the tanks rushed down to fight the germans during the begining of the buldge.

Drove my 1996 Jeep (new at the time) to try and get back in time for my son to go to one of his first dances. The speedometer was pegged down at the bottom of the gauge (I think it would offically go only around 110mph or so. And in Belgium it would have been a hefty fine, but hey


ed
__________________
Edward Tinker
************
Co-Author of Police Lugers - Co-Author of Simson Lugers
Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Edward Tinker is offline   Reply With Quote
The following member says Thank You to Edward Tinker for your post:
Unread 02-05-2010, 07:16 PM   #10
Don M
Patron
LugerForum
Patron
 
Don M's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
Default

Lugers fit in Dreyse holsters quite well as evidenced by the many examples of the use of these holsters with Lugers by the Weimar-era police. Also, the provenance of this holster confirms it contained a Luger. I am thinking that the pattern of the old Dreyse holsters may have been used in this case but am puzzled by the lack of a spare mag pouch. Might it have been left off for tank crews to prevent it hanging up in tight spaces?
__________________
Regards,
Don
[email protected]

Author of History Writ in Steel: German Police Markings 1900-1936
http://www.historywritinsteel.com
Don M is offline   Reply With Quote
The following member says Thank You to Don M for your post:
Unread 02-05-2010, 07:41 PM   #11
Norme
Always A
Lifetime Forum
Patron
 
Norme's Avatar
 
Join Date: Jul 2009
Location: Colorado
Posts: 2,417
Thanks: 226
Thanked 2,603 Times in 933 Posts
Default

Hi Don, In Ed's initial post he states that the spare mag pouch appears to have been removed. Regards
Norme is offline   Reply With Quote
The following member says Thank You to Norme for your post:
Unread 02-05-2010, 09:55 PM   #12
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
Default

Looks like a P-38 holster to me with the auto lift strap and the leather block sewn inside the right side behind where the mag pouch used to be.This holster NEVER started out to be a P-08. It was made for a P-38. You can tell this by the shape of the body where the pistol handle is. Nothing like the P08 shape.

If you look inside you can see where the stitching is still there from the old mag pouch.

This holster/type would never have had a tool pouch in the top flap. Nor would it ever have a mag pouch sewn on the front.

The really unusual thing about it is the buckle assembly closure. Unlike it's P-38 brethren which have the metal bale closure.
I can't recall ever seeing one of these.

Jerry Burney
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


l[email protected]

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
The following member says Thank You to lugerholsterrepair for your post:
Unread 02-05-2010, 11:49 PM   #13
Nytebytes
User
 
Join Date: Feb 2010
Location: Florida, USA
Posts: 7
Thanks: 12
Thanked 0 Times in 0 Posts
Default

Mr. Burney,

Thank you so much, I appreciate and value your comments. I'm now very intrigued by your comment ... "I can't recall ever seeing one of these."

I had researched the P-38 holsters as well and found their contour around the grip area not as pronounced as mine. Possibly different holster manufacturers were allowed some creative license when developing the shape of their holsters.

I will post some more pictures of both a 1939 P-38 holster and my 1939 A. Fischer holster and would be interested in your observations.

Sincerely,
Ed Vedder
[email protected]
Nytebytes is offline   Reply With Quote
Unread 02-05-2010, 11:57 PM   #14
Nytebytes
User
 
Join Date: Feb 2010
Location: Florida, USA
Posts: 7
Thanks: 12
Thanked 0 Times in 0 Posts
Default

I apologize for the quality of these pictures but I think they will suffice to show the contour differences.

Ed Vedder
Attached Thumbnails
Click image for larger version

Name:	Front.JPG
Views:	191
Size:	183.1 KB
ID:	11258  

Click image for larger version

Name:	Rear.jpg
Views:	195
Size:	134.5 KB
ID:	11259  

Nytebytes is offline   Reply With Quote
Unread 02-06-2010, 05:11 AM   #15
klaus 3338
User
 
Join Date: Jun 2009
Location: Germany
Posts: 517
Thanks: 0
Thanked 411 Times in 160 Posts
Default

For me it´s a typical early commercial P38 holster. The magazine pouch seems to be cut. There seems to be a small part of leather of the former magazine pouch and on the last photo we see some stitches of the mag pouch in the open holster. Because of the now missing mag pouch the flap of the holster was cut away “to make a correct picture” (sorry for the poor English in the last sentence- I do not know it better).

A witty fellow added the swastika to "raise the value" but I think it is a rare holster.

I wonder a bit that Fischer made a commercial holster. Commercial holsters were made in Germany mostly by AKaH (Albrecht Kind aus Hürth). Because I never have loved P38 I have no more info about this type of holster. But because I love Lugers I have a nice example of a commercial Luger holster of a resembling kind.

Best regards Klaus
Attached Thumbnails
Click image for larger version

Name:	AKaH1.jpg
Views:	187
Size:	186.7 KB
ID:	11260  

Click image for larger version

Name:	AKaH2.jpg
Views:	166
Size:	185.7 KB
ID:	11261  

klaus 3338 is offline   Reply With Quote
The following member says Thank You to klaus 3338 for your post:
Unread 02-06-2010, 04:29 PM   #16
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
Default

Ed, I believe you have made an error. Where you show your holster & another supposedly P-38 for comparison, a 1939 Auwater & Bubeck..The holster shown is a P08.

I know this because on the bottom of the left belt loop there are 2 overstitched lines where the lifting strap is sewn in. This is ONLY found on P08 holsters.

Wherever you got this photo, it has been mislabled.
Jerry Burney
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


l[email protected]

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
Unread 02-07-2010, 01:29 PM   #17
Nytebytes
User
 
Join Date: Feb 2010
Location: Florida, USA
Posts: 7
Thanks: 12
Thanked 0 Times in 0 Posts
Default

Hi Jerry,

You are correct, I mis-typed the description. I have collected various photos and wasn't paying attention. Thanks for spotting my mistake.

BTW, Klaus did weigh in on my query and thinks it may be a rare holster. I'm delighted to hear that and will continue my quest to find more information or another like it.

Thanks again,
Ed
Nytebytes is offline   Reply With Quote
Unread 02-07-2010, 02:59 PM   #18
klaus 3338
User
 
Join Date: Jun 2009
Location: Germany
Posts: 517
Thanks: 0
Thanked 411 Times in 160 Posts
Default

A photo of it´s right side (where usualy is the magazine pouch) would help to see if there are old stiches.
klaus 3338 is offline   Reply With Quote
Unread 02-07-2010, 06:52 PM   #19
Nytebytes
User
 
Join Date: Feb 2010
Location: Florida, USA
Posts: 7
Thanks: 12
Thanked 0 Times in 0 Posts
Default

Klaus,

Here are two pictures of the right side. If you need different angles, just let me know.
Attached Thumbnails
Click image for larger version

Name:	IMG_0026.JPG
Views:	196
Size:	91.1 KB
ID:	11322  

Click image for larger version

Name:	IMG_0025.JPG
Views:	196
Size:	79.3 KB
ID:	11323  

Nytebytes is offline   Reply With Quote
Unread 02-08-2010, 03:32 AM   #20
klaus 3338
User
 
Join Date: Jun 2009
Location: Germany
Posts: 517
Thanks: 0
Thanked 411 Times in 160 Posts
Default

Ed, thanks for the photo. It seems to be what I thought- an early commercial P38 holster with a cut magazin pouch.
Best regards Klaus
klaus 3338 is offline   Reply With Quote
The following member says Thank You to klaus 3338 for your post:
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:32 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com