LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > New Collectors Forum

Reply
Thread Tools Display Modes
Unread 11-07-2018, 10:09 PM   #1
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default Inherited 1918 Erfurt with police holster and two mags

This luger was brought back to the states by my husband's late father-in-law around 1946 (As family lore goes). I knew absolutely nothing about guns, let alone Lugers, until I found my way here. I have to admit I'm hooked!
I have read and searched these forums, and the more I learn, the less qualifiedI feel to even post a question. I am humbled by the level of expertise represented here and will try not to waste your time.
I am confused by the double striking or mistriking of the 90 on a two places on the gun. Pictures below. It almost looks like they stamped 89 and then stamped 90 over it. Makes me very skeptical. We know it's been in a safe for the last 70 years, but before that is anyone's guess.
I've been told the vertical strap on the holster means it's a police holster, but I'm confconfusedby the unit marking P.A.L.II.409.
One magazine has a matching serial number, the other does not.
There are numerous markings, even on the grip screws.
Any input would be much appreciated.
I am still working on my photo skills but would be glad to provide more photos.
Thank you in advance for your time.
Sincerely,
Diane
Attached Thumbnails
Click image for larger version

Name:	20181106_074425_resized.jpg
Views:	292
Size:	116.6 KB
ID:	74503  

Click image for larger version

Name:	20181106_073628_resized.jpg
Views:	276
Size:	155.5 KB
ID:	74504  

Click image for larger version

Name:	20181107_191928-1_resized.jpg
Views:	303
Size:	110.3 KB
ID:	74505  

Click image for larger version

Name:	20181107_191856-1_resized.jpg
Views:	273
Size:	106.5 KB
ID:	74506  

Click image for larger version

Name:	20181107_193246-1_resized.jpg
Views:	280
Size:	90.0 KB
ID:	74507  

Click image for larger version

Name:	20181106_204621_resized.jpg
Views:	291
Size:	101.6 KB
ID:	74510  

Click image for larger version

Name:	20181104_191723.jpg
Views:	279
Size:	118.9 KB
ID:	74511  

Attached Images
  
OBXmom is offline   Reply With Quote
The following 9 members says Thank You to OBXmom for your post:
Unread 11-07-2018, 10:25 PM   #2
DonVoigt
User
 
DonVoigt's Avatar
 
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
Default

Hi and welcome to the luger forum.
You have a late Imperial dated 1918 Erfurt made luger, taken into police service during the Weimar Republic era.
It has an added safety above the sear bar, which is peculiar to police luger pistols and was added about 1932-3. The luger may have been "reworked" at that time and the part that is overstamped renumbered to match when replaced- no way to know for sure- but any needed replacements were commonly re-numbered.

The marking is that of the PolizeiAmt Leipzig, The Roman II is a sub area, and 409 is the weapon number in the police system of Leipzig. This info from the great book by member Don Maus,
History Writ in Steel, pp220-221.

Your holster is also the police pattern, with the "up" strap and no buckle. The one matching magazine is a nice extra, and has the police acceptance of eagle/L - which dates to Third Reich times.

This luger no doubt served through the Weimar era and through WWII.

Good pictures, but a little more light would help, a grey or other darker than white background will help get better exposure..
The holster may have markings on the back and/or inside the top flap, if marked , please show more pictures.

Check out the stickys with a lot of info in the new collector area.
__________________
03man(Don Voigt); Luger student and collector.
Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie
DonVoigt is offline   Reply With Quote
The following 8 members says Thank You to DonVoigt for your post:
Unread 11-07-2018, 10:34 PM   #3
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default

Thank you for the quick reply!
The holster has a marking on the back between the belt loops.
I'm also posting a pic of the other restamping.
It's amazing how much information can be learned from a 100 year old gun.
OBXmom is offline   Reply With Quote
The following member says Thank You to OBXmom for your post:
Unread 11-07-2018, 10:36 PM   #4
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default

Hopefully this works.
Attached Images
  
OBXmom is offline   Reply With Quote
The following 2 members says Thank You to OBXmom for your post:
Unread 11-07-2018, 11:10 PM   #5
Norme
Always A
Lifetime Forum
Patron
 
Norme's Avatar
 
Join Date: Jul 2009
Location: Colorado
Posts: 2,417
Thanks: 226
Thanked 2,603 Times in 933 Posts
Default

Hi Diane,
That is the makers mark of Akah, a manufacturer of sporting gear still in business today. Your holster was a Commercial before it saw Police service.
Norm
Norme is offline   Reply With Quote
The following 2 members says Thank You to Norme for your post:
Unread 11-07-2018, 11:23 PM   #6
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
Default

The number 1190 MAY be on the back of the tool or someplace on the holster. If you are skilled enough to take the pistol apart there are many more markings to be seen inside.


Many of these pistols were re furbished by Mauser..It is discovered by seeing if the rear toggle pin is numbered or if the firing pin is fluted. Neither of these were on the original pistol.
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


l[email protected]

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
The following member says Thank You to lugerholsterrepair for your post:
Unread 11-07-2018, 11:50 PM   #7
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default

Here are a few more photos. There was only one mark and no number under the left grip. The right grip has a mark and the number 90.
There are marks on almost every piece and plain.
I included a pic of the other magazine marking.
I also included another photo of the serial number and the marking underneath it. What is under the eagle? I haven't seen another like it but I haven't gotten my hands on any books yet.
I understand how guns were turned in and double dated and reissued, but this only has the one date of 1918. Does that mean it was originally issued to the police? Or was it manufactured and sat unused until the sear safety was added and then went to the police?
I also find it odd that all the other 90's are so clearly marked.
Attached Thumbnails
Click image for larger version

Name:	20181104_210401_resized.jpg
Views:	311
Size:	189.0 KB
ID:	74514  

Click image for larger version

Name:	20181104_192357_resized.jpg
Views:	272
Size:	109.1 KB
ID:	74515  

Click image for larger version

Name:	20181104_192404_resized.jpg
Views:	294
Size:	155.8 KB
ID:	74516  

Click image for larger version

Name:	20181104_192336_resized.jpg
Views:	240
Size:	111.2 KB
ID:	74517  

Click image for larger version

Name:	20181104_191921_resized.jpg
Views:	289
Size:	110.7 KB
ID:	74518  

Click image for larger version

Name:	20181104_191445_resized.jpg
Views:	273
Size:	172.9 KB
ID:	74519  

Click image for larger version

Name:	20181104_190946_resized_1.jpg
Views:	296
Size:	144.2 KB
ID:	74520  

Click image for larger version

Name:	20181106_195748_resized.jpg
Views:	261
Size:	128.0 KB
ID:	74521  

Click image for larger version

Name:	20181106_195719_resized.jpg
Views:	287
Size:	165.3 KB
ID:	74522  

Attached Images
 
OBXmom is offline   Reply With Quote
The following 3 members says Thank You to OBXmom for your post:
Unread 11-07-2018, 11:58 PM   #8
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
Default

It started it's career as an Imperial Army weapon at the tail end of the Great War.
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


l[email protected]

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
The following member says Thank You to lugerholsterrepair for your post:
Unread 11-08-2018, 12:30 AM   #9
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default

Jerry, there are no numbers or marks on either side of the tool, but II did find a penciled number 1778 on the underside of the holster flap. Could that be the original holster number? We're they written in pencil? Do you think any of our scribbling will be so cherished 100 years from now?
We have not checked out the firing pin yet.
Thank you all for your time!
Attached Thumbnails
Click image for larger version

Name:	20181107_225343_resized.jpg
Views:	247
Size:	169.9 KB
ID:	74531  

Attached Images
  
OBXmom is offline   Reply With Quote
The following 2 members says Thank You to OBXmom for your post:
Unread 11-08-2018, 07:03 AM   #10
DonVoigt
User
 
DonVoigt's Avatar
 
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
Default

The presence of only two acceptance/proof marks on the receiver indicate it was a "spare" receiver and perhaps not used or assembled until after the 1920 marking (which lasted only about a year from 1920-21, though only 1920 was the property marking applied).

The "Su25" seen on the bottom of the barrel, also indicates a replacement barrel, assembled/used when built/rebuilt at the Spandau arsenal ca. the late 1920's.

The numbered right grip is likely the original grip, the left grip was often replaced - especially if the pistol received the magazine safety during "upgrades" in the 1930's. The mag safety was later removed or inactivated as they caused function problems, but the grip which was cut specifically for the mag safety was often retained, or replaced with another grip at the time.

A picture of the upper grip area with the left grip off would help, as would a picture of the inside of the left grip in total or just the upper half.

The spare mag is the #2 mag from another police luger.

Don't worry too much about the over strikes, they may simply indicate use of a previously numbered part during the extensive rebuilt that this pistol received; it was likely refinished during the 1930s update, and appears to be original to work done in that period.

I'm not sure what you mean by "squibbling" and 100 years, but it has been 100 years since this piece was first made, so maybe that answers the question- in the future- who knows.
__________________
03man(Don Voigt); Luger student and collector.
Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie
DonVoigt is offline   Reply With Quote
The following 4 members says Thank You to DonVoigt for your post:
Unread 11-08-2018, 11:15 AM   #11
Eugen
User
 
Eugen's Avatar
 
Join Date: Apr 2016
Location: Newburgh,IN
Posts: 790
Thanks: 394
Thanked 631 Times in 334 Posts
Thumbs up

OBXmom, welcome to the forum. You did a great job of providing info on your Luger and got some great responses from many of the experts here. You have a very nice, fascinating police Luger. I hope you keep and cherish this wonderful heirloom.

If you decide to sell it, you can do so here, as I am sure you will get several good offers. You can expect help here in determining a fair market value. But, I hope you don't sell it.
__________________
“God created war so that Americans would learn geography.”
― Mark Twain
Eugen is offline   Reply With Quote
The following 4 members says Thank You to Eugen for your post:
Unread 11-08-2018, 01:33 PM   #12
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default

Thank you. The amount of information on these pages is astounding.
Would this luger be considered a shooter, or a collector piece? We have no intentions of selling at this time, but it's always good to have an idea of worth. Right now we are enjoying the daily discoveries about this piece. We still need to get a look inside, but I figured it would be better to do some research first so we don't unintentionally damage anything valuable.
We're very grateful for everyone's input.
OBXmom is offline   Reply With Quote
Unread 11-08-2018, 01:38 PM   #13
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
Default

Diane, George Luger was a genius like Col. Colt & John Browning. Luger"s will literally fall apart if you discover their little nuances. People are confused and mystified by what seems very complex but isn't . Look on You Tube for directions on taking apart a Luger pistol.


Diane, 1778 is likely a pistol serial yes. Not done in the usual Police serial number manner but not much other reason to see such a 4 digit number. Usually the German Police stamped serial numbers in the back right corner or along the front body leading edge of the holster. This being a commercial AKAH holster..anything is possible.



The tool looks original. Might just be the original commercial tool.
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


l[email protected]

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
The following 2 members says Thank You to lugerholsterrepair for your post:
Unread 11-08-2018, 01:53 PM   #14
HerrKaiser
User
 
HerrKaiser's Avatar
 
Join Date: Feb 2018
Location: South Carolina
Posts: 848
Thanks: 784
Thanked 861 Times in 411 Posts
Default

Based on Don’s comments, it should seem that this pistol would be classified as a collectible piece since all the work/rework/refinishing was done in Germany before it was brought back by your family. In fact it looks very aesthetically pleasing and in good condition.
__________________
-QM

Looking for Mauser S/42 toggle train #22
HerrKaiser is offline   Reply With Quote
The following 2 members says Thank You to HerrKaiser for your post:
Unread 11-08-2018, 03:25 PM   #15
DonVoigt
User
 
DonVoigt's Avatar
 
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
Default

I would expect to pay $1500 to $2000 for a luger of this type with one matching mag, and a holster/tool.
The big online retailers would try to sell it for more, like $2500 =/-.

Police lugers are not the most popular versions of this classic pistol; but they do seem to be gaining a little more respect(and pricing) these days.

Having a commercial holster is a bit odd, as most police "rigs" have government contractor marked issue holsters.
I'm not convinced the hand written number inside is a "police" number- but it makes little or no difference to the value or desirability of your rig; if it were the same number as the pistol it would be an enhancement. JMHO.
__________________
03man(Don Voigt); Luger student and collector.
Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie
DonVoigt is offline   Reply With Quote
The following 2 members says Thank You to DonVoigt for your post:
Unread 11-08-2018, 04:43 PM   #16
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default

Holy cow! We had no idea. Might take me a while to work up the nerve to take it apart now.
The responses are amazing. Thank you for your time and willingness to share your expertise.
OBXmom is offline   Reply With Quote
Unread 11-08-2018, 04:54 PM   #17
Don M
Patron
LugerForum
Patron
 
Don M's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
Default

Wow!!! This doesn't happen often. I have recorded in HWIS Table 14-4 a wood-base mag stamped 490, PALII , 1190, 2 (vertical orientation). These almost certainly indicate the inventory number, police headquarters, gun serial number and spare magazine. Note the difference in inventory numbers. Fortunately, I have also included a photo of this base in HWIS on p. 222 and can see how I misread this number. It is actually 409. This is the original spare magazine for your gun!!!!! How it got into this other gun is a mystery.
Attached Images
 
__________________
Regards,
Don
[email protected]

Author of History Writ in Steel: German Police Markings 1900-1936
http://www.historywritinsteel.com
Don M is offline   Reply With Quote
The following 4 members says Thank You to Don M for your post:
Unread 11-08-2018, 05:33 PM   #18
OBXmom
User
 
Join Date: Nov 2018
Posts: 20
Thanks: 24
Thanked 34 Times in 14 Posts
Default

Don,
That is a crazy coincidence! Thank you so much for sharing the photo! I am gob smacked!
Diane
OBXmom is offline   Reply With Quote
Unread 11-08-2018, 05:39 PM   #19
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
Default

This is the original spare magazine for your gun!!!!! How it got into this other gun is a mystery. So another mystery..where is it?
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


l[email protected]

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
Unread 11-09-2018, 01:35 AM   #20
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,935
Thanks: 2,033
Thanked 4,533 Times in 2,093 Posts
Default

Something to consider - although Mauser might have refurbished guns after WW1 - before that was DWM and later the police armory in Berlin was capable of doing just about anything, from what I understand.

Nice Erfurt - parts made by Erfurt, left over parts were either put together by police armorers or DWM (even some small gun smith shops were doing this) during the Weimar period, but it went into police service and likely served into WW2.

Ed
__________________
Edward Tinker
************
Co-Author of Police Lugers - Co-Author of Simson Lugers
Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Edward Tinker is offline   Reply With Quote
The following member says Thank You to Edward Tinker for your post:
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:53 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com