LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > General Discussions

Reply
Thread Tools Display Modes
Unread 02-04-2023, 05:53 PM   #1
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,507
Thanks: 1,318
Thanked 3,653 Times in 1,004 Posts
Default Drum contents! Centuries old jam!

Hi to all, I had a BING drum on my bench in for repair. I thought the follower was missing as that is a common issue with original drums, but no! Turns out it had the classic jam to where the rounds didn't negotiate the upturn into the tube. Now the reason this wasn't cleared was because, instead of the little cross bolt in this area, it was a solid rivited cross pin! There was no taking it apart! That was right up to when I got my grubby little paws on it! The rivet was removed and the drum disassembled wthout any further delay.
What I found inside was the two rounds remaining that caused the jam? There would have been aprox. 10 rounds on top of those that obviously just poured out long, long ago.
The two stuck rounds have what looks to be farsi (sp.) or middle eastern head stamps, with the weird VL plus other stamps I cannot interperate? Otherwise, they apprear as standard 9mm ball ammo?
Anyway, that's what they are, and it goes to show the drums had issues even when new or nearly so! Best to all, til....lat'r...GT
G.T. is offline   Reply With Quote
The following 8 members says Thank You to G.T. for your post:
Unread 02-04-2023, 06:19 PM   #2
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,507
Thanks: 1,318
Thanked 3,653 Times in 1,004 Posts
Default Farsi 1928

What little I cound find online shows the rounds as being 1928? Not quite a century, but a long time ago none the less.... best, til...lat'r...GT...
G.T. is offline   Reply With Quote
The following 3 members says Thank You to G.T. for your post:
Unread 02-04-2023, 07:00 PM   #3
HerrKaiser
User
 
HerrKaiser's Avatar
 
Join Date: Feb 2018
Location: South Carolina
Posts: 848
Thanks: 784
Thanked 861 Times in 411 Posts
Default

Wow! With Farsi ammo, I wonder if that drum accompanied a Mauser Persian contract LP.08 in its lifetime?
__________________
-QM

Looking for Mauser S/42 toggle train #22
HerrKaiser is offline   Reply With Quote
The following 3 members says Thank You to HerrKaiser for your post:
Unread 02-04-2023, 07:35 PM   #4
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,022
Thanks: 1,090
Thanked 5,178 Times in 1,703 Posts
Default

G.T.
What an interesting life you lead
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is offline   Reply With Quote
The following 4 members says Thank You to Ron Wood for your post:
Unread 02-05-2023, 08:31 AM   #5
Vlim
Moderator
Lifetime
LugerForum Patron
 
Vlim's Avatar
 
Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,988 Times in 1,205 Posts
Default

Did they look like this?

If so, it is 1970s surplus ammo from Egypt. It was sold as cheap shooting and collectors ammo years ago. Quality was bad, split cases, bad primers, etc...

So unfortunately there is no Arabic history, other than imported surplus ammo, behind the drum.
Attached Images
 
Vlim is offline   Reply With Quote
The following member says Thank You to Vlim for your post:
Unread 02-05-2023, 11:17 AM   #6
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,507
Thanks: 1,318
Thanked 3,653 Times in 1,004 Posts
Default That's it!

Hi Gerben, you nailed it! That is it exactly! Too bad it's not earlier? It would have been more interesting. I was hoping we could blame it on Lawrance of Arabia ?? .......But instead we have Forrest Gump, box a chocolates, kind of deal... Thanks Gerben, til.....lat'r......GT
G.T. is offline   Reply With Quote
The following 2 members says Thank You to G.T. for your post:
Unread 02-05-2023, 02:06 PM   #7
Kiwi
User
 
Kiwi's Avatar
 
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 307
Thanks: 215
Thanked 435 Times in 172 Posts
Default

I think T.E Lawrence was based out of HM Egypt office, but I believe Lawrence used a Broomhandle.
Kiwi is offline   Reply With Quote
The following member says Thank You to Kiwi for your post:
Unread 02-05-2023, 04:24 PM   #8
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,507
Thanks: 1,318
Thanked 3,653 Times in 1,004 Posts
Default rv

Hi Gerben, according to other web sites, "rv" stands for number 28 which I assume was the manufacture date? The rest is egg salad to me???? Best to all, til....lat'r...GT
G.T. is offline   Reply With Quote
Unread 02-06-2023, 02:05 AM   #9
DTR04
User
 
DTR04's Avatar
 
Join Date: Oct 2005
Location: Texas
Posts: 52
Thanks: 92
Thanked 36 Times in 18 Posts
Default

IIRC, those numbers are read right to left so, 82.
DTR04 is offline   Reply With Quote
The following member says Thank You to DTR04 for your post:
Unread 02-06-2023, 07:51 AM   #10
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,507
Thanks: 1,318
Thanked 3,653 Times in 1,004 Posts
Default hard to read!

Wow, I wouldn't even pass kindergarten in Iran! ...... best to all, til....lat'r...GT...
G.T. is offline   Reply With Quote
Unread 02-06-2023, 09:49 AM   #11
Kiwi
User
 
Kiwi's Avatar
 
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 307
Thanks: 215
Thanked 435 Times in 172 Posts
Default

No, no, G.T. Iran is Persian and speaks Farsi writes Sanskrit

Egypt is Arab, speaks and writes Arabic.

see how different they look
Attached Thumbnails
Click image for larger version

Name:	farsi.jpg
Views:	207
Size:	45.7 KB
ID:	86442  

Kiwi is offline   Reply With Quote
The following member says Thank You to Kiwi for your post:
Unread 02-06-2023, 12:55 PM   #12
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,507
Thanks: 1,318
Thanked 3,653 Times in 1,004 Posts
Smile Not a chance in hell!

Despite being totally un-recognizable? AND going backwords or from right to left, you might as well add upside down!!!! ... I'll never get past number 82, and that's fine with me... Thanks to all for the input, it was fun and also interesting to find out, Best, til....lat'r....GT
G.T. is offline   Reply With Quote
The following member says Thank You to G.T. for your post:
Unread 02-06-2023, 03:21 PM   #13
DTR04
User
 
DTR04's Avatar
 
Join Date: Oct 2005
Location: Texas
Posts: 52
Thanks: 92
Thanked 36 Times in 18 Posts
Default

I would not fire that ammo. It is likely super hot for SMG use and probably corrosive to boot.
DTR04 is offline   Reply With Quote
The following member says Thank You to DTR04 for your post:
Unread 02-06-2023, 05:52 PM   #14
sdmark777
User
 
sdmark777's Avatar
 
Join Date: Apr 2018
Posts: 288
Thanks: 695
Thanked 672 Times in 174 Posts
Default

Yup, that was some cheap shooting fun ammo. I remember getting a couple thousand rounds and had a lot of fun shooting it in carbines. Would have a few failures to fire but great for plinking. Yes it was hot and meant for submachine guns. I know a guy who shot several mags of it through a Sig Sauer P226 handgun. Stupid is as stupid does I guess. It was still shooting fine, but when he cleaned it, there was a crack down the side of the aluminum frame! Back then, Sig replaced the P226 with a new one. That was back then and later they pretty much stopped replacing guns even for LEO's.
sdmark777 is offline   Reply With Quote
The following member says Thank You to sdmark777 for your post:
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:52 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com