P38/PP/PPK Forums...?

Pete Ebbink · 01-30-2005, 12:28 AM

Have been down for a few days...at least from my PC...

Anyone else having the same problems...???

i8tokyo · 01-30-2005, 12:40 AM

Hi Pete, I can't get in either.

John D. · 01-30-2005, 10:33 AM

Hmmm...??? Nothing has changed on those forums..?? Are you linking to the site - or directly to the forums? Also - do you get an "error" (like can not be found) - or a "time out" on your browser?

Let me know - OK - and I'll try to figure it out from my end..!

John D.

Ida-Alp · 01-30-2005, 10:42 AM

I've been getting a lot of "page not found" displays on the P.38 forum.. Al

John D. · 01-30-2005, 11:28 AM

Hi Al..!

If you just tried - I took that server off-line to try to optimize some of the settings.. I just put it back - so give it a try again and let me know if it pops up, OK?

Best to you!

John

Ron Smith · 01-30-2005, 11:33 AM

John,
I just tried, and got a "page cannot be displayed". Maybe Orv's taking a nap?
Ron
Just tried again. This is the explaination at the bottom.

Cannot find server or DNS Error
Internet Explorer

John D. · 01-30-2005, 11:49 AM

Yes - I know..!!! Every time I think I changed something - I have to take it off-line - which is WHEN you folks choose to "try it" - Now - CUT THAT OUT!!

OK - it's back...

Heh!!!

John D.

Ron Smith · 01-30-2005, 12:08 PM

Okie-Dokie then!!!

Lugerdoc · 01-30-2005, 06:35 PM

John D, I thought that it was just my funky WebTv, but it will access 3 or 4 threads normally and then it take forever for anymore to come up; or in some case my machine rejects topic because it took too long. Perhaps this is the same problem that others are hoving on your Walther Forums. Tom

ken d · 01-30-2005, 07:15 PM

John:
Just got a new computer all new hard/software, Same problem, timeout or very long resonse time.

Ken D

Pete Ebbink · 01-30-2005, 08:31 PM

Hi John D.,

This is what I get after I attempt to load either one of the pages :

"The page cannot be displayed"

I got the same thing when traveling this week and using a PC on the job site or in the hotels...

These are the links I try to use :

http://www.p38forum.com

http://www.p38forum.com/scripts/pp-k/pp-k.pl

I even tried to use the links in the LF "Links & rResources" section, and get the same negative results...

Regards,

Pete...

Edward Tinker · 01-31-2005, 12:12 AM

It is up and down, just likes johns wild hair.

John D. · 02-01-2005, 09:12 PM

OK - here you go... ALL OF THESE ARE BETA DROPS AND ARE NOT LIVE!!! I'm in the process of moving/updating them to this server.....

Try the Beta P 38 Forum on this server:
http://forum.lugerforum.com/cgi-bin/P38/P38.pl

Or - you can try the updated Beta PPK Forum:
http://forum.lugerforum.com/cgi-bin/pp-k/pp-k.pl

Or - ready? - you can try the new BETA LugerForum Gallery which is built on a relational database:
http://forum.lugerforum.com/gallery2/

All of these are WORKS IN PROGRESS!!! Please do NOT ask for support on these until I finish, OK???

Thanks!!!

John D.

Ron Smith · 02-01-2005, 11:00 PM

BETA!!? No wonder I'm using VHS. And I think my starter cord broke!!

John D. · 02-01-2005, 11:49 PM

Quote:

Originally posted by "Max"
BETA!!? ....

Yep - that's "Beta,Max".... What's a VHS? Is that like a VCR - which mine is "broke" anyway - so it's a DCR ("Dead Compact Recorder")???

John D.

Edward Tinker · 02-01-2005, 11:52 PM

HEEEEY send me a contract dude!

John D. · 02-02-2005, 12:06 AM

OK-doaky.. Been sort'a buzy - can you tell??? And - all my "free time" isn't what it was..

In fact, I have a .45 Luger sitting next to me that I STILL HAVE to post pictures and do a write up (for a LugerForum Member)!

(Yes - it really is a .45 Luger that belongs to a new Member of this Forum...)

Best to ya!

John D.

Edward Tinker · 02-02-2005, 12:11 AM

coool! you know those 45 luggers are the prize of a lifetime! Bettern those anchor luggers

John D. · 02-02-2005, 12:15 AM

Yea - but they don't shoot as well as those Anker Loogers. This one shoots a little high and to the right. A squirrel was LOL as I zinged about 10 shots right over his head (this .45 makes a dandy camp gun - just need to aim low and to the left....

)

Should I try another bulk pack of White Box .45 - or try some of that new fangled .45 GAP junk???

Heh!

JD

01-30-2005, 12:28 AM	#1
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	P38/PP/PPK Forums...? Have been down for a few days...at least from my PC... Anyone else having the same problems...???

01-30-2005, 12:40 AM	#2
i8tokyo User Join Date: Apr 2004 Location: Olathe KS Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Hi Pete, I can't get in either. __________________ Then I heard the voice of the Lord saying, "Whom shall I send? And who will go for us?" And I said, "Here am I. Send me!" Isaiah 6:8

01-30-2005, 10:42 AM	#4
Ida-Alp Lifer Lifetime Forum Patron Join Date: Aug 2004 Location: Nampa ID Posts: 116 Thanks: 81 Thanked 4 Times in 4 Posts	P.38 forum problems I've been getting a lot of "page not found" displays on the P.38 forum.. Al

01-30-2005, 11:33 AM	#6
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	John, I just tried, and got a "page cannot be displayed". Maybe Orv's taking a nap? Ron Just tried again. This is the explaination at the bottom. Cannot find server or DNS Error Internet Explorer __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

01-30-2005, 12:08 PM	#8
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Okie-Dokie then!!! __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

01-30-2005, 10:33 AM	#3
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Hmmm...??? Nothing has changed on those forums..?? Are you linking to the site - or directly to the forums? Also - do you get an "error" (like can not be found) - or a "time out" on your browser? Let me know - OK - and I'll try to figure it out from my end..! John D.

01-30-2005, 11:28 AM	#5
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Hi Al..! If you just tried - I took that server off-line to try to optimize some of the settings.. I just put it back - so give it a try again and let me know if it pops up, OK? Best to you! John

01-30-2005, 11:49 AM	#7
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Yes - I know..!!! Every time I think I changed something - I have to take it off-line - which is WHEN you folks choose to "try it" - Now - CUT THAT OUT!! OK - it's back... Heh!!! John D.

01-30-2005, 06:35 PM	#9
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	John D, I thought that it was just my funky WebTv, but it will access 3 or 4 threads normally and then it take forever for anymore to come up; or in some case my machine rejects topic because it took too long. Perhaps this is the same problem that others are hoving on your Walther Forums. Tom __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

01-30-2005, 07:15 PM	#10
ken d Patron LugerForum Patron Join Date: Jun 2002 Location: louisville ky Posts: 277 Thanks: 31 Thanked 9 Times in 8 Posts	John: Just got a new computer all new hard/software, Same problem, timeout or very long resonse time. Ken D

01-30-2005, 08:31 PM	#11
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Hi John D., This is what I get after I attempt to load either one of the pages : "The page cannot be displayed" I got the same thing when traveling this week and using a PC on the job site or in the hotels... These are the links I try to use : http://www.p38forum.com http://www.p38forum.com/scripts/pp-k/pp-k.pl I even tried to use the links in the LF "Links & rResources" section, and get the same negative results... Regards, Pete...

01-31-2005, 12:12 AM	#12
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	It is up and down, just likes johns wild hair. __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

02-01-2005, 09:12 PM	#13
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	OK - here you go... ALL OF THESE ARE BETA DROPS AND ARE NOT LIVE!!! I'm in the process of moving/updating them to this server..... Try the Beta P 38 Forum on this server: http://forum.lugerforum.com/cgi-bin/P38/P38.pl Or - you can try the updated Beta PPK Forum: http://forum.lugerforum.com/cgi-bin/pp-k/pp-k.pl Or - ready? - you can try the new BETA LugerForum Gallery which is built on a relational database: http://forum.lugerforum.com/gallery2/ All of these are WORKS IN PROGRESS!!! Please do NOT ask for support on these until I finish, OK??? Thanks!!! John D.

02-01-2005, 11:00 PM	#14
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	BETA!!? No wonder I'm using VHS. And I think my starter cord broke!! __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

02-01-2005, 11:52 PM	#16
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	HEEEEY send me a contract dude!

02-02-2005, 12:06 AM	#17
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	OK-doaky.. Been sort'a buzy - can you tell??? And - all my "free time" isn't what it was.. In fact, I have a .45 Luger sitting next to me that I STILL HAVE to post pictures and do a write up (for a LugerForum Member)! (Yes - it really is a .45 Luger that belongs to a new Member of this Forum...) Best to ya! John D.

02-02-2005, 12:11 AM	#18
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	coool! you know those 45 luggers are the prize of a lifetime! Bettern those anchor luggers __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

02-02-2005, 12:15 AM	#19
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Yea - but they don't shoot as well as those Anker Loogers. This one shoots a little high and to the right. A squirrel was LOL as I zinged about 10 shots right over his head (this .45 makes a dandy camp gun - just need to aim low and to the left.... ) Should I try another bulk pack of White Box .45 - or try some of that new fangled .45 GAP junk??? Heh! JD