Luger Mainspring Installation-Step 1 <img BORDER="0" src='http://boards.rennlist.com/luger/pic.gif'>

Thor · 03-21-2002, 02:12 AM

This is the way I have recently been installing them, takes me about 5 minutes. No jigs, no vices, just a few simple tools and I dont even need cuss words any more. Hugh will probably laugh at the method I have come up with.

1. Luger parts: Locate the frame, recoil lever, recoil lever PIN, main spring and main spring GUIDE ROD.

2. TOOLS: Pliers, tapered long pin punch or screw driver shaft that will fit through the guide rod hole, screw driver

http://boards.rennlist.com/upload/MSpring1.jpg

03-21-2002, 07:42 PM

Thor · 03-21-2002, 07:51 PM

In a day or so, I will fix that one picture that is backwards, it is confusing! I have a small adjustment to make on one! It was not feeding right or locking bad, too much springola! Had one just like it last week, I am now adjusting to 124 fmj Remington's UMC yellow box standard pressure loading unless a customers requests other field tests! Thor

03-22-2002, 03:22 AM

03-21-2002, 02:12 AM	#1
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Luger Mainspring Installation-Step 1 This is the way I have recently been installing them, takes me about 5 minutes. No jigs, no vices, just a few simple tools and I dont even need cuss words any more. Hugh will probably laugh at the method I have come up with. 1. Luger parts: Locate the frame, recoil lever, recoil lever PIN, main spring and main spring GUIDE ROD. 2. TOOLS: Pliers, tapered long pin punch or screw driver shaft that will fit through the guide rod hole, screw driver http://boards.rennlist.com/upload/MSpring1.jpg

03-21-2002, 07:42 PM	#2
66mustang Guest Posts: n/a	Thanks Thor, saved info to my harddrive! (EOM)

03-21-2002, 07:51 PM	#3
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Re: Luger Ammo Adjustments and main springs In a day or so, I will fix that one picture that is backwards, it is confusing! I have a small adjustment to make on one! It was not feeding right or locking bad, too much springola! Had one just like it last week, I am now adjusting to 124 fmj Remington's UMC yellow box standard pressure loading unless a customers requests other field tests! Thor

03-22-2002, 03:22 AM	#4
Viggo G Dereng Guest Posts: n/a	RE: Suggest changes in step #5 see my post there (EOM)