Carbine Pictures for Hugh <img BORDER="0" src='http://forum.rennlist.com/luger/pic.gif'>

Ron Wood · 04-16-2002, 02:59 PM

Hugh

Hope these might help. This is a barrel/frame

view of the forearm extension. The extension is silver soldered onto the frame. The next picture gives a detailed view of this extension

http://boards.rennlist.com/upload/FrameFront.jpg

Ron Wood · 04-16-2002, 03:04 PM

This shows the attachment of the frame extension. As you can see, there is actually a slot milled into the frame for the extension. This gives a lot more purchase area for the silver solder to join the extension to the frame. I have seen an example of a nicely done extension make-up that did not use this slot. If the carbine was ever fired, this "pasted on" extension would surely fail!

http://boards.rennlist.com/upload/Extension.jpg

Ron Wood · 04-16-2002, 03:11 PM

This is the wooden forearm assembly. You can see the accelerator spring assembly that is held in place by the sling swivel stud. If your friend is building his carbine with a coil spring mainspring (rather than the old model leaf spring), this accelerator does not need to be added to the forearm. A stiffer mainspring will do the job. The 1920 Carbines eliminated this feature.

http://boards.rennlist.com/upload/Forearm.jpg

John Sabato · 04-16-2002, 03:50 PM

Hugh · 04-16-2002, 04:19 PM

Luke · 04-16-2002, 05:12 PM

04-16-2002, 02:59 PM	#1
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Carbine Pictures for Hugh Hugh Hope these might help. This is a barrel/frame view of the forearm extension. The extension is silver soldered onto the frame. The next picture gives a detailed view of this extension http://boards.rennlist.com/upload/FrameFront.jpg

04-16-2002, 03:04 PM	#2
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Carbine Picture 2 for Hugh This shows the attachment of the frame extension. As you can see, there is actually a slot milled into the frame for the extension. This gives a lot more purchase area for the silver solder to join the extension to the frame. I have seen an example of a nicely done extension make-up that did not use this slot. If the carbine was ever fired, this "pasted on" extension would surely fail! http://boards.rennlist.com/upload/Extension.jpg

04-16-2002, 03:11 PM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Re: Carbine Picture 3 for Hugh This is the wooden forearm assembly. You can see the accelerator spring assembly that is held in place by the sling swivel stud. If your friend is building his carbine with a coil spring mainspring (rather than the old model leaf spring), this accelerator does not need to be added to the forearm. A stiffer mainspring will do the job. The 1920 Carbines eliminated this feature. http://boards.rennlist.com/upload/Forearm.jpg

04-16-2002, 03:50 PM	#4
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	What excellent photographs Ron! Thanks! (EOM)

04-16-2002, 04:19 PM	#5
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	Thanks, Ron , what I needed (EOM)

04-16-2002, 05:12 PM	#6
Luke User Join Date: Jun 2002 Location: NC - USA Posts: 1,239 Thanks: 0 Thanked 18 Times in 6 Posts	Excellent pictures, Ron. Thank you for posting. (EOM)