Interarms frame only

~bs · 11-23-2017, 12:20 AM

Any ideas on what a brand new interarms luger frame only (serial number) would be worth? I have the opportunity to buy one. I imagine it wouldn't be too much?

DonVoigt · 11-23-2017, 09:45 AM

I agree with not much, what would you do with it?
Parts are not 100% interchangeable with the "real" luger.
There are also several styles of frame- someone might need a particular one.

hayhugh · 11-23-2017, 09:53 AM

Does the frame include all the parts that are present when you remove the upper? I might be interested at a couple of hundred...

~bs · 11-26-2017, 03:21 AM

Quote:

Originally Posted by hayhugh

Does the frame include all the parts that are present when you remove the upper? I might be interested at a couple of hundred...

That is correct. The owner had 5 new interarms lugers (all sold to other parties) and this frame -lower, trigger, etc, (with serial number).

I was considering making an offer, but possibly will pass due to the hassle, and not being able to do anything with it once I do own it (other than try to make a few bucks on it) unless I was able to buy for extremely cheap, then part out or sell to someone who can turn it into a complete gun.

Lugerdoc · 11-23-2017, 12:36 PM

bs, Since an Interarms Parabellum frame takes different parts than a standard PO8, the side plate assy @$100, trigger& spring @$50, grip safetyassy (3 parts) @$75, grips @$100 and grip screws (different thread) 2 @$50. The hold open assy, TD lever & spring will interchange with the PO8. So this would be an expensive item to make into a shooter. TH PS: I have most of the new Parabellum parts in stock.

11-23-2017, 12:20 AM	#1
~bs User Join Date: Nov 2017 Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	Interarms frame only Any ideas on what a brand new interarms luger frame only (serial number) would be worth? I have the opportunity to buy one. I imagine it wouldn't be too much?

11-23-2017, 09:45 AM	#2
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,442 Thanked 4,350 Times in 2,040 Posts	I agree with not much, what would you do with it? Parts are not 100% interchangeable with the "real" luger. There are also several styles of frame- someone might need a particular one. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

11-23-2017, 12:36 PM	#5
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	bs, Since an Interarms Parabellum frame takes different parts than a standard PO8, the side plate assy @$100, trigger& spring @$50, grip safetyassy (3 parts) @$75, grips @$100 and grip screws (different thread) 2 @$50. The hold open assy, TD lever & spring will interchange with the PO8. So this would be an expensive item to make into a shooter. TH PS: I have most of the new Parabellum parts in stock. __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

11-23-2017, 09:53 AM	#3
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 857 Thanked 513 Times in 275 Posts	Does the frame include all the parts that are present when you remove the upper? I might be interested at a couple of hundred...