Interarms Luger

Leed709 · 02-07-2019, 02:07 AM

Recently picked a Interarms Luger 9mm with grip safety. Grip safety not working. What I need is a picture of the grip safety with the left grip removed. This way maybe I can fix what is wrong with it. Any help would be appreciated. Leed709

Lugerdoc · 02-07-2019, 01:04 PM

Leed, First check that your grip safety is properly installed. If so, perhaps a missing or broken return spring. I have these available @$40 + S&H. Tom

Norme · 02-07-2019, 05:29 PM

Quote:

Originally Posted by Leed709

Recently picked a Interarms Luger 9mm with grip safety. Grip safety not working. What I need is a picture of the grip safety with the left grip removed. This way maybe I can fix what is wrong with it. Any help would be appreciated. Leed709

Hi Leland,
Is this what you're looking for?
Norm

Leed709 · 02-07-2019, 05:38 PM

Not sure how the grip safety is susposed to be installed that is the reason I need to see a picture.

Leed709 · 02-07-2019, 05:51 PM

Thanks, Norme for picture. Is the picture of a of a older model Luger? The Picture I need is a Picture of a Post war Interarms Luger that was made by Mauser in the 1970

Vlim · 02-07-2019, 06:45 PM

This should help.

Spring 47 is probably dead.

Leed709 · 02-07-2019, 09:03 PM

Thanks Vim for the picture of the parts. This is not what I'm looking for. I need to see a post war luger with the grip safety installed and the left grip panel removed. This luger I bought used and I don't think that it has the right safety on it. A picture of a unstalled safety would proberly show what I need.

DonVoigt · 02-07-2019, 10:09 PM

You really can't see how the spring operates the safety, as it is covered by the safety.
Installing the spring is easy, getting the spring behind the tab on the grip safety when installing it is tricky.
Just play with it a little.
You can see how it works by looking from the other side , i.e. with the right grip off.

Lugerdoc · 02-08-2019, 11:11 AM

Leed. You are correct that the grip safety AND spring for your Mauser Parabellum are DIFFERENT than the photo of M1906 DWM type shown above. i do have BOTH new Mauser 1970s Parabellum parts in stock @$50 and $40 respectively + $10 Priority mail to TX. if you don't have a local gun smith or Forum member who can assist, I'd be pleased to install what is needed for a few dollars more if you care to send me your frame. TH

Eugen · 02-08-2019, 08:02 PM

Tom to the rescue! Tom came through on parts I needed on more than one occasion. "Hats off" to Tom.

ithacaartist · 02-10-2019, 08:06 PM

Quote:

Originally Posted by Lugerdoc

Leed. You are correct that the grip safety AND spring for your Mauser Parabellum are DIFFERENT than the photo of M1906 DWM type shown above. i do have BOTH new Mauser 1970s Parabellum parts in stock @$50 and $40 respectively + $10 Priority mail to TX. if you don't have a local gun smith or Forum member who can assist, I'd be pleased to install what is needed for a few dollars more if you care to send me your frame. TH

If Leed isn't an FFL holder, it will cost him $80 each way to ship a frame via FedEx or UPS, which both require overnight service for a handgun. We cant use the USPS...only FFL dealers can.

DonVoigt · 02-10-2019, 08:49 PM

Figure out if your pistol is really "broken" first!

02-07-2019, 02:07 AM	#1
Leed709 User Join Date: Dec 2018 Location: Centeral Texas Posts: 28 Thanks: 1 Thanked 0 Times in 0 Posts	Interarms Luger Recently picked a Interarms Luger 9mm with grip safety. Grip safety not working. What I need is a picture of the grip safety with the left grip removed. This way maybe I can fix what is wrong with it. Any help would be appreciated. Leed709

02-07-2019, 01:04 PM	#2
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Leed, First check that your grip safety is properly installed. If so, perhaps a missing or broken return spring. I have these available @$40 + S&H. Tom __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

02-07-2019, 05:38 PM	#4
Leed709 User Join Date: Dec 2018 Location: Centeral Texas Posts: 28 Thanks: 1 Thanked 0 Times in 0 Posts	Mauser Luger Not sure how the grip safety is susposed to be installed that is the reason I need to see a picture.

02-07-2019, 06:45 PM	#6
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,989 Times in 1,205 Posts	This should help. Spring 47 is probably dead. Attached Thumbnails

02-07-2019, 09:03 PM	#7
Leed709 User Join Date: Dec 2018 Location: Centeral Texas Posts: 28 Thanks: 1 Thanked 0 Times in 0 Posts	Thanks Thanks Vim for the picture of the parts. This is not what I'm looking for. I need to see a post war luger with the grip safety installed and the left grip panel removed. This luger I bought used and I don't think that it has the right safety on it. A picture of a unstalled safety would proberly show what I need.

02-07-2019, 05:51 PM	#5
Leed709 User Join Date: Dec 2018 Location: Centeral Texas Posts: 28 Thanks: 1 Thanked 0 Times in 0 Posts	Thanks, Norme for picture. Is the picture of a of a older model Luger? The Picture I need is a Picture of a Post war Interarms Luger that was made by Mauser in the 1970

02-07-2019, 10:09 PM	#8
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,442 Thanked 4,350 Times in 2,040 Posts	You really can't see how the spring operates the safety, as it is covered by the safety. Installing the spring is easy, getting the spring behind the tab on the grip safety when installing it is tricky. Just play with it a little. You can see how it works by looking from the other side , i.e. with the right grip off. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

02-08-2019, 11:11 AM	#9
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Leed. You are correct that the grip safety AND spring for your Mauser Parabellum are DIFFERENT than the photo of M1906 DWM type shown above. i do have BOTH new Mauser 1970s Parabellum parts in stock @$50 and $40 respectively + $10 Priority mail to TX. if you don't have a local gun smith or Forum member who can assist, I'd be pleased to install what is needed for a few dollars more if you care to send me your frame. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

02-08-2019, 08:02 PM	#10
Eugen User Join Date: Apr 2016 Location: Newburgh,IN Posts: 790 Thanks: 394 Thanked 631 Times in 334 Posts	Tom to the rescue! Tom came through on parts I needed on more than one occasion. "Hats off" to Tom. __________________ “God created war so that Americans would learn geography.” ― Mark Twain

02-10-2019, 08:49 PM	#12
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,442 Thanked 4,350 Times in 2,040 Posts	Figure out if your pistol is really "broken" first! __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie