Show us your "shooter" lugers! - Page 2

Curly1 · 02-04-2016, 04:00 PM

I was having problems figuring it out as it wasn't posting at first.

once I got it right I just followed the same steps after each posted OK.

DonVoigt · 02-04-2016, 05:54 PM

Quote:

Originally Posted by Curly1

I was having problems figuring it out as it wasn't posting at first.

once I got it right I just followed the same steps after each posted OK.

Yep, when in doubt- do what works!

Geo99 · 02-06-2016, 12:43 AM

Quote:

Originally Posted by Edward Tinker

Alvin, I think they have medication to help with concentration.

13 postings on this thread and 4 of them are yours, to discuss, but do not show anything.

MY latest shooter (below) - my 1914 Erfurt Artillery, I can't seem to find any pictures right now

Ed - Which one is the shooter - the carbine or the one with the white grips? (I just had to ask). But seriously, what is that slabside barrel gun with the white grips?

- Geo

OIF2 · 02-07-2016, 12:30 AM

This one came my way from an estate liquidation; I got it at a very good price. It has 2 WW II-era mags (S/42 and a small k-marked). Both function fine in the long Swiss frame with a 9mm DWM receiver. I have a new Swiss receiver, 7.65 mm barrel and a Swiss magazine coming in from LugerDoc to get it back to a righteous Swiss shooter. Not collectible, but shoot-able. A little cosmetic surgery in the future with "Thor" is also planned.
Bob

DonVoigt · 02-07-2016, 10:21 AM

Bob,
I like it.

I did solve the long shank barrel/short receiver when I installed the original '06 barrel though, by using a spacer or breeching washer. Yes, the 6" bbl is installed in a "reject" Kreighoff receiver, note the reject star marking.

I have a similar mismatch on my navy shooter, when I used/use it with a 4" bbl/short receiver. Shown in the lower picture below with my Erma .22lr kit installed on the 4" combination.

As you can see, grips and frame finish were "improved" along the way and I now have a second muzzle nut for the conversion, thanks to lugerdoc!

All-

Keep the pictures coming guys!

OIF2 · 02-07-2016, 01:20 PM

Thanks, Don. What's nice about this forum is that everyone here loves to shoot their Lugers...maybe not the highly-collectibles, but the shooters. So everyone is into building great range guns of every description. It's almost as much fun as collecting the rare ones. I'm having a good time planning out the work on my Swiss rebuild. LugerDoc, Thor and G.T. have been VERY helpful, as have the forum members here answering my questions on finish, etc.
Bob

OIF2 · 02-07-2016, 05:47 PM

Here's an Interarms I used to have. We shot it a little; my daughter REALLY liked shooting it.
Bob

cirelaw · 02-08-2016, 11:13 AM

Last year I purchased a beautiful shooter from George Anderson that was fined tuned by G.T.~ Thank You Both!!

Vlim · 02-08-2016, 11:53 AM

Well, technically it's not a shooter anymore, as I retired from sports shooting due to rheumatic problems, but here is the configuration I used to practice with. The Japanese stock helped to give me some additional support, with a bum shoulder to work with

The pistol was also used to test an experimental adjustable Mauser rear sight, that never went into production.

Nowadays its retired and sleeping with the rest, inside the refurbishers card board box. The pistol is an ex-VoPo refurb, done by Frankonia in the late 1990s.

rolandtg · 02-08-2016, 05:02 PM

Quote:

Originally Posted by Vlim

Well, technically it's not a shooter anymore, as I retired from sports shooting due to rheumatic problems, but here is the configuration I used to practice with. The Japanese stock helped to give me some additional support, with a bum shoulder to work with

Is that an MGC stock?

lfid · 02-08-2016, 07:56 PM

Hi Vlim,

do you have any more detailed / disassembled pics of the experimental adjustable rear sight assembly ?

was the sight and the shroud anchored by the center and rear axles or welded on ?
was elevation adjustment in the front sight only with the toggle rear sight windage only ?

looks better than the production sport pistol !!!

thanks for sharing
Bill

Vlim · 02-12-2016, 08:03 AM

Roland, yes that is an MGC stock. Although made as a stock for non-firing replicas it actually functions quite well.

Bill: The rear sight was held in place by the rear toggle pin. The rear toggle had been cut to make room for the sight. Problem was that the sight would move upwards during recoil, as it was only fixed at the front and not at the rear.

DonVoigt · 02-12-2016, 09:44 AM

"Roland, yes that is an MGC stock. Although made as a stock for non-firing replicas it actually functions quite well. "

Just a reminder/information for US luger owners:
This stock is not legal to be attached to any luger in the US; one exception- a 16" barreled carbine clone could have it attached and not fall afoul of the NFA.

Vilm is in Europe.

LU1900 · 02-16-2016, 12:21 AM

Curly1 , your L.Al is a sneak in the u range ? , got the L.Al.1. sneak
Thanks

Curly1 · 02-16-2016, 02:24 PM

Quote:

Originally Posted by LU1900

Curly1 , your L.Al is a sneak in the u range ? , got the L.Al.1. sneak
Thanks

Yes it is.

kurusu · 02-20-2016, 12:42 PM

The 1941 BYF and the 1938 S/42:

Click image for larger version

Name: WIN_20160220_08_25_33_Pro.jpg
Views: 71
Size: 91.6 KB
ID: 56650

Took a better picture.

Click image for larger version

Name: DSC00001.jpg
Views: 58
Size: 183.0 KB
ID: 58610

lfid · 03-01-2016, 02:16 AM

Vlim,
thanks !!! for the info and pictures of the experimental rear sight
Bill

Caferacer · 03-20-2016, 10:08 AM

My shooter to be

Sergio Natali · 03-20-2016, 01:35 PM

Vlim that was interesting, thanks for sharing!

Sergio Natali · 03-20-2016, 01:37 PM

Quote:

Originally Posted by Caferacer

My shooter to be

I think you'll have plenty to work at it before you take it to the range!
Good luck!

02-04-2016, 04:00 PM	#21
Curly1 User Join Date: Oct 2005 Location: Upstate New York Posts: 1,242 Thanks: 117 Thanked 714 Times in 371 Posts	I was having problems figuring it out as it wasn't posting at first. once I got it right I just followed the same steps after each posted OK. __________________ Laugh hard and often. Gary

02-07-2016, 12:30 AM	#24
OIF2 User Join Date: Apr 2010 Location: TEXAS Posts: 83 Thanks: 133 Thanked 73 Times in 25 Posts	This one came my way from an estate liquidation; I got it at a very good price. It has 2 WW II-era mags (S/42 and a small k-marked). Both function fine in the long Swiss frame with a 9mm DWM receiver. I have a new Swiss receiver, 7.65 mm barrel and a Swiss magazine coming in from LugerDoc to get it back to a righteous Swiss shooter. Not collectible, but shoot-able. A little cosmetic surgery in the future with "Thor" is also planned. Bob Last edited by OIF2; 02-07-2016 at 03:25 PM.

02-07-2016, 10:21 AM	#25
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,442 Thanked 4,350 Times in 2,040 Posts	Bob, I like it. I did solve the long shank barrel/short receiver when I installed the original '06 barrel though, by using a spacer or breeching washer. Yes, the 6" bbl is installed in a "reject" Kreighoff receiver, note the reject star marking. I have a similar mismatch on my navy shooter, when I used/use it with a 4" bbl/short receiver. Shown in the lower picture below with my Erma .22lr kit installed on the 4" combination. As you can see, grips and frame finish were "improved" along the way and I now have a second muzzle nut for the conversion, thanks to lugerdoc! All- Keep the pictures coming guys! Attached Thumbnails __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

02-08-2016, 11:13 AM	#28
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Last year I purchased a beautiful shooter from George Anderson that was fined tuned by G.T.~ Thank You Both!! Attached Thumbnails

02-08-2016, 11:53 AM	#29
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,989 Times in 1,205 Posts	Well, technically it's not a shooter anymore, as I retired from sports shooting due to rheumatic problems, but here is the configuration I used to practice with. The Japanese stock helped to give me some additional support, with a bum shoulder to work with The pistol was also used to test an experimental adjustable Mauser rear sight, that never went into production. Nowadays its retired and sleeping with the rest, inside the refurbishers card board box. The pistol is an ex-VoPo refurb, done by Frankonia in the late 1990s. Attached Thumbnails

02-07-2016, 01:20 PM	#26
OIF2 User Join Date: Apr 2010 Location: TEXAS Posts: 83 Thanks: 133 Thanked 73 Times in 25 Posts	Thanks, Don. What's nice about this forum is that everyone here loves to shoot their Lugers...maybe not the highly-collectibles, but the shooters. So everyone is into building great range guns of every description. It's almost as much fun as collecting the rare ones. I'm having a good time planning out the work on my Swiss rebuild. LugerDoc, Thor and G.T. have been VERY helpful, as have the forum members here answering my questions on finish, etc. Bob

02-07-2016, 05:47 PM	#27
OIF2 User Join Date: Apr 2010 Location: TEXAS Posts: 83 Thanks: 133 Thanked 73 Times in 25 Posts	Here's an Interarms I used to have. We shot it a little; my daughter REALLY liked shooting it. Bob

02-08-2016, 07:56 PM	#31
lfid Lifer Lifetime Forum Patron Join Date: Sep 2006 Location: Wichita, KS USA Posts: 453 Thanks: 573 Thanked 96 Times in 53 Posts	Hi Vlim, do you have any more detailed / disassembled pics of the experimental adjustable rear sight assembly ? was the sight and the shroud anchored by the center and rear axles or welded on ? was elevation adjustment in the front sight only with the toggle rear sight windage only ? looks better than the production sport pistol !!! thanks for sharing Bill

02-12-2016, 08:03 AM	#32
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,989 Times in 1,205 Posts	Roland, yes that is an MGC stock. Although made as a stock for non-firing replicas it actually functions quite well. Bill: The rear sight was held in place by the rear toggle pin. The rear toggle had been cut to make room for the sight. Problem was that the sight would move upwards during recoil, as it was only fixed at the front and not at the rear. Attached Thumbnails

02-12-2016, 09:44 AM	#33
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,442 Thanked 4,350 Times in 2,040 Posts	"Roland, yes that is an MGC stock. Although made as a stock for non-firing replicas it actually functions quite well. " Just a reminder/information for US luger owners: This stock is not legal to be attached to any luger in the US; one exception- a 16" barreled carbine clone could have it attached and not fall afoul of the NFA. Vilm is in Europe. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

02-16-2016, 12:21 AM	#34
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 908 Thanks: 42 Thanked 469 Times in 197 Posts	Curly1 , your L.Al is a sneak in the u range ? , got the L.Al.1. sneak Thanks __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/

02-20-2016, 12:42 PM	#36
kurusu User Join Date: Sep 2007 Posts: 1,225 Thanks: 2,679 Thanked 930 Times in 509 Posts	The 1941 BYF and the 1938 S/42: Took a better picture. Last edited by kurusu; 05-01-2016 at 07:55 PM.

03-01-2016, 02:16 AM	#37
lfid Lifer Lifetime Forum Patron Join Date: Sep 2006 Location: Wichita, KS USA Posts: 453 Thanks: 573 Thanked 96 Times in 53 Posts	Vlim, thanks !!! for the info and pictures of the experimental rear sight Bill

03-20-2016, 10:08 AM	#38
Caferacer User Join Date: Mar 2016 Posts: 60 Thanks: 96 Thanked 25 Times in 13 Posts	My shooter to be Attached Images

03-20-2016, 01:35 PM	#39
Sergio Natali User Join Date: Feb 2013 Location: Somewhere in Northern Italy Posts: 2,646 Thanks: 1,082 Thanked 1,783 Times in 1,007 Posts	Vlim that was interesting, thanks for sharing! __________________ "Originality can't be restored and should be at the top of any collector's priority list.