Luger Mainspring Installation-Step #2 <img BORDER="0" src='http://boards.rennlist.com/luger/pic.gif'

Thor · 03-21-2002, 02:15 AM

The first step to to put the recoil lever and recoil lever pin in place, make sure you have the part with the hooks up toward the back of the frame and the part with the CROSS BAR down toward the main spring. This requires the tapered pin punch for alignment of the lever and then a tap of a hammer and a punch to seat the pin.

http://boards.rennlist.com/upload/MSpring2.jpg

03-21-2002, 02:15 AM	#1
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Luger Mainspring Installation-Step #2 The first step to to put the recoil lever and recoil lever pin in place, make sure you have the part with the hooks up toward the back of the frame and the part with the CROSS BAR down toward the main spring. This requires the tapered pin punch for alignment of the lever and then a tap of a hammer and a punch to seat the pin. http://boards.rennlist.com/upload/MSpring2.jpg