Please can you help identify this P08?

WaynePlemmons · 07-04-2006, 01:39 AM

I have inhereted a P08 from my deceased uncle and was wondering what info you might be able to give me about it. First all serial numbers match. On top of the barrel in front of the breach block is sthe number 1940. On the top of the forward half of the toggle bar is the number 42 in line with the barrel axis. On the right side above the slide rail are two markings both the same. They have three horizontal lines with what looks like an x in the center. Both have the number 655 below the marking. Also to the right( toward the muzzle) there is what appears to be a German eagle. This is also on the round portion of the barrel just forward of the tapered portion.

Thank you for your help in learning about a very unique and beautiful weapon.

Wayne Plemmons
(U.S.N. Retired)

Edward Tinker · 07-04-2006, 01:42 AM

Wayne, welcome to the forum! Yes, we'd like pictures and full serial number, to include suffix on the front of the frame. However, i can tell you a lot from the info you gave me;

1940 is the year it was accepted into service
42 is the code for Mauser, who made the luger in 1940

Eagle 655 is the proof and acceptance markings

Edward Tinker
SSG, USA Retired

PS: I retired to Palouse, WA, but the job took me to Colorado

WaynePlemmons · 07-04-2006, 01:55 AM

Thanks for the fast reply. I have done a little research on the pistol and thought that it was a Mauser made piece. The serial number is3786, with no letters as a prefix or suffix. I also forgot to say that on the front of the frame, just below the barrel is what looks like a cursif small case e.. And the magazine has a aluminum base on it. Overall finish is good with just the normal wear marks on the left side behind the take down lug. And the ejector spring is colored brown. Unfortunately, the pics I took are too big to send . I will take new ones in a smaller size soon.

Wayne Plemmons

Edward Tinker · 07-04-2006, 02:00 AM

Sounds good, I used to have a 1940/42 but traded it.

I like to take the pics large and crop and then resize them, but do what is best for you

Try taking a picture of the 'e", you should have one just below the serial number on the frame too.

Does the magazine match the gun? Many times they do not.

Ed

WaynePlemmons · 07-04-2006, 02:35 AM

Hey Ed, no the serial number on the mag is way off, as is usual from what I have learned. One of the things that I would like to know is if this one is a collector or a shooter. Also, do you know if anyone makes a modern holster that would fit it? I will try to get some pics and edit them for the forum .

Wayne

Frank · 07-04-2006, 10:19 AM

Hi Wayne, let me add my welcome! If your suffix is indeed an "e", then one more bit of information is, it was completed about June 1940.

I'm looking forward to your pics!!

pvluger · 07-16-2006, 11:17 AM

There's original holsters on ebay all the time. However IMA militaria has them. Galati international is another source for reproduction holsters and takedown tools.

pvluger · 07-16-2006, 11:21 AM

here's the link for repro:

http://www.ima-usa.com/product_info....roducts_id/630

WaynePlemmons · 07-17-2006, 12:59 AM

Thanks for the reply about the reproduction holster. But I was looking for a modern holster for the P08. I got one from Michaels of Oregon, (model 81052) yesterday. I needed one that was left handed and all the original design ones are right handed.

John Sabato · 07-17-2006, 08:23 PM

I believe that CMR in the UK has reproduction holsters in a left hand version... but check with them directly...

There should be a link in our Links and Resources page from the homepage.

07-04-2006, 01:39 AM	#1
WaynePlemmons New User Join Date: Jul 2006 Location: Washington state Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Please can you help identify this P08? I have inhereted a P08 from my deceased uncle and was wondering what info you might be able to give me about it. First all serial numbers match. On top of the barrel in front of the breach block is sthe number 1940. On the top of the forward half of the toggle bar is the number 42 in line with the barrel axis. On the right side above the slide rail are two markings both the same. They have three horizontal lines with what looks like an x in the center. Both have the number 655 below the marking. Also to the right( toward the muzzle) there is what appears to be a German eagle. This is also on the round portion of the barrel just forward of the tapered portion. Thank you for your help in learning about a very unique and beautiful weapon. Wayne Plemmons (U.S.N. Retired)

07-04-2006, 01:42 AM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	Wayne, welcome to the forum! Yes, we'd like pictures and full serial number, to include suffix on the front of the frame. However, i can tell you a lot from the info you gave me; 1940 is the year it was accepted into service 42 is the code for Mauser, who made the luger in 1940 Eagle 655 is the proof and acceptance markings Edward Tinker SSG, USA Retired PS: I retired to Palouse, WA, but the job took me to Colorado __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

07-17-2006, 08:23 PM	#10
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	I believe that CMR in the UK has reproduction holsters in a left hand version... but check with them directly... There should be a link in our Links and Resources page from the homepage. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2006, 01:55 AM	#3
WaynePlemmons New User Join Date: Jul 2006 Location: Washington state Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for the fast reply. I have done a little research on the pistol and thought that it was a Mauser made piece. The serial number is3786, with no letters as a prefix or suffix. I also forgot to say that on the front of the frame, just below the barrel is what looks like a cursif small case e.. And the magazine has a aluminum base on it. Overall finish is good with just the normal wear marks on the left side behind the take down lug. And the ejector spring is colored brown. Unfortunately, the pics I took are too big to send . I will take new ones in a smaller size soon. Wayne Plemmons

07-04-2006, 02:00 AM	#4
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	Sounds good, I used to have a 1940/42 but traded it. I like to take the pics large and crop and then resize them, but do what is best for you Try taking a picture of the 'e", you should have one just below the serial number on the frame too. Does the magazine match the gun? Many times they do not. Ed

07-04-2006, 02:35 AM	#5
WaynePlemmons New User Join Date: Jul 2006 Location: Washington state Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Hey Ed, no the serial number on the mag is way off, as is usual from what I have learned. One of the things that I would like to know is if this one is a collector or a shooter. Also, do you know if anyone makes a modern holster that would fit it? I will try to get some pics and edit them for the forum . Wayne

07-04-2006, 10:19 AM	#6
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 163 Times in 87 Posts	Hi Wayne, let me add my welcome! If your suffix is indeed an "e", then one more bit of information is, it was completed about June 1940. I'm looking forward to your pics!!

07-16-2006, 11:17 AM	#7
pvluger User Join Date: Jul 2006 Location: The Wild West Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts	There's original holsters on ebay all the time. However IMA militaria has them. Galati international is another source for reproduction holsters and takedown tools.

07-16-2006, 11:21 AM	#8
pvluger User Join Date: Jul 2006 Location: The Wild West Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts	here's the link for repro: http://www.ima-usa.com/product_info....roducts_id/630

07-17-2006, 12:59 AM	#9
WaynePlemmons New User Join Date: Jul 2006 Location: Washington state Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for the reply about the reproduction holster. But I was looking for a modern holster for the P08. I got one from Michaels of Oregon, (model 81052) yesterday. I needed one that was left handed and all the original design ones are right handed.