Here is my Personal Luger

Missing Something · 01-31-2007, 05:16 PM

Just one that I tripped on at an auction years ago..... nice and a good shooter as well. Its in .30 Luger.

Cheers,
Craig

Dwight Gruber · 01-31-2007, 06:45 PM

Craig,

Eveything about this Luger says it should be 9mm. Has it been relined?

--Dwight

Missing Something · 01-31-2007, 06:48 PM

Not as far as I know. It looks original.

Vlim · 01-31-2007, 06:51 PM

Hi,

This pistol AND the barrel started out as a 9mm without any doubt at all. The land-to-land diameter of 8.82mm is a testament of that.

So either this pistol has been relined to .30 luger or your .30 luger rounds may have had some space to move around in

Pete Ebbink · 01-31-2007, 08:19 PM

Lightening up the barrel photos, somewhat...

Johnny C. Kitchens · 01-31-2007, 09:12 PM

Show us the muzzle!!!

Missing Something · 02-01-2007, 11:52 PM

OK...seems someone upped my medication......

The Luger in question is indeed 9mm.... why I thought it was in .30 Luger......

Here are some more photos... any insight as to its history?

Ron Smith · 02-02-2007, 11:06 AM

Tac,

Pack it up, get your bones to Oregon, and you can be mixed up too.

Ron

Doug G. · 02-08-2007, 08:07 PM

How accurate is that gun? Looks like it is missing something inside the barrel.

Vlim · 02-09-2007, 06:25 AM

I always found that the presence of rifling has been overrated in the past

Even without much rifling left, lugers are still pretty accurate.

reich1900 · 02-09-2007, 08:21 PM

When looking at the last two pictures of the grip bottom I noticed the there were some letters stamped X, I, F and a small O. I have never noticed these before so I had to check my 1918 Erfurt and sure enough it is stamped S, I, P and also has the O. Can any of you enlighten me as to what they mean? Just never thought to look there.
Bernie

Missing Something · 02-09-2007, 09:02 PM

The rifling is there, not as sharp as original but it still shoots good.

Edward Tinker · 02-09-2007, 09:11 PM

Craig, your 1917 was made by Erfurt in 1917, and with a 180,000 made that year, you can see where your 'r" suffix fits in (they ended at approx v).

Bernie, these are considered workers marks, seen on erfurts, also seen on reworks (not that this is a rework)...

Ed

Missing Something · 02-09-2007, 10:58 PM

Thanks Ed.... so when I found it years ago at a furniture and antique auction and paid $90 for it........ you think it was a good deal???

reich1900 · 02-10-2007, 04:30 PM

Thank you Ed, I thought it might be something like that, good too get confirmation.

01-31-2007, 05:16 PM	#1
Missing Something User Join Date: Jan 2007 Location: Canada Posts: 21 Thanks: 0 Thanked 0 Times in 0 Posts	Here is my Personal Luger Just one that I tripped on at an auction years ago..... nice and a good shooter as well. Its in .30 Luger. Cheers, Craig

01-31-2007, 09:12 PM	#6
Johnny C. Kitchens User Join Date: Jan 2003 Location: Arlington, Texas Posts: 518 Thanks: 0 Thanked 20 Times in 8 Posts	Show us the muzzle!!! __________________ Johnny C. Kitchens

02-02-2007, 11:06 AM	#8
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Tac, Pack it up, get your bones to Oregon, and you can be mixed up too. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

02-08-2007, 08:07 PM	#9
Doug G. User Join Date: Jun 2002 Location: Illinois Posts: 713 Thanks: 1 Thanked 53 Times in 17 Posts	How accurate is that gun? Looks like it is missing something inside the barrel. __________________ Suppose you were an idiot.....and suppose you were a member of Congress.....But I repeat myself" ~~ Mark Twain

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-31-2007, 06:45 PM	#2
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,902 Thanks: 0 Thanked 1,318 Times in 431 Posts	Craig, Eveything about this Luger says it should be 9mm. Has it been relined? --Dwight

01-31-2007, 06:48 PM	#3
Missing Something User Join Date: Jan 2007 Location: Canada Posts: 21 Thanks: 0 Thanked 0 Times in 0 Posts	Not as far as I know. It looks original.

01-31-2007, 06:51 PM	#4
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,989 Times in 1,205 Posts	Hi, This pistol AND the barrel started out as a 9mm without any doubt at all. The land-to-land diameter of 8.82mm is a testament of that. So either this pistol has been relined to .30 luger or your .30 luger rounds may have had some space to move around in

01-31-2007, 08:19 PM	#5
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Lightening up the barrel photos, somewhat...

02-01-2007, 11:52 PM	#7
Missing Something User Join Date: Jan 2007 Location: Canada Posts: 21 Thanks: 0 Thanked 0 Times in 0 Posts	OK...seems someone upped my medication...... The Luger in question is indeed 9mm.... why I thought it was in .30 Luger...... Here are some more photos... any insight as to its history?

02-09-2007, 06:25 AM	#10
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,989 Times in 1,205 Posts	I always found that the presence of rifling has been overrated in the past Even without much rifling left, lugers are still pretty accurate.

02-09-2007, 08:21 PM	#11
reich1900 User Join Date: Jun 2003 Location: Long Island, N.Y. Posts: 59 Thanks: 0 Thanked 6 Times in 5 Posts	When looking at the last two pictures of the grip bottom I noticed the there were some letters stamped X, I, F and a small O. I have never noticed these before so I had to check my 1918 Erfurt and sure enough it is stamped S, I, P and also has the O. Can any of you enlighten me as to what they mean? Just never thought to look there. Bernie

02-09-2007, 09:02 PM	#12
Missing Something User Join Date: Jan 2007 Location: Canada Posts: 21 Thanks: 0 Thanked 0 Times in 0 Posts	The rifling is there, not as sharp as original but it still shoots good.

02-09-2007, 09:11 PM	#13
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	Craig, your 1917 was made by Erfurt in 1917, and with a 180,000 made that year, you can see where your 'r" suffix fits in (they ended at approx v). Bernie, these are considered workers marks, seen on erfurts, also seen on reworks (not that this is a rework)... Ed

02-09-2007, 10:58 PM	#14
Missing Something User Join Date: Jan 2007 Location: Canada Posts: 21 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks Ed.... so when I found it years ago at a furniture and antique auction and paid $90 for it........ you think it was a good deal???

02-10-2007, 04:30 PM	#15
reich1900 User Join Date: Jun 2003 Location: Long Island, N.Y. Posts: 59 Thanks: 0 Thanked 6 Times in 5 Posts	Thank you Ed, I thought it might be something like that, good too get confirmation.