#6 byf 41

Steinar · 02-03-2007, 11:36 AM

This is my latest Luger byf 41.
All matching incl. magazine but with a replacement barrel.
The receiver has a more into red colur (?), but with the proper markings.
Would apreciate any inputs

c3006 · 02-03-2007, 11:51 AM

I find single digit SN# pistols to be fascinating,can I assume this means that this was the 6th pistol made that year since there is no letter suffix.

wlyon · 02-03-2007, 12:13 PM

Steinar.. Nice byf41. I have a byf 41 that has a reddish colored receiver. According to Jan Still This resulted from " the hardness of the receiver and failure to maintain the proper temperature or chemical strength" Apparently this only happened on the receivers. Bill

tracyp · 02-03-2007, 01:19 PM

The 6 with no suffix does not mean it was the 6th Luger made that year. They continued from where they left off the previous year.

Tracy

Dwight Gruber · 02-03-2007, 01:25 PM

Tracey is quite right, WWII Mauser production was sequenced differently from WWI DWM and Erfurt--check Still's Third Reich Lugers, p.16.

Actually, any part could end up "plum" colored. I have observed plum extractors and ejectors; go to the "Old Owner's Corner" on the home page black bar, and check out Thor's (Ted Green's) "Plum S/42" for a Luger which is almost completely plum.

--Dwight

waltherguy · 02-03-2007, 01:33 PM

Really neat pistol Morgan... I have a AC-44 P-38 that has a plum color over most of the gun.. I heard this was a problem with the blueing?

Conny · 02-03-2007, 04:15 PM

Here is another #6 luger

http://www.sarcoinc.com/luger-variation-new.html

Steinar · 02-03-2007, 04:27 PM

Thanks for the input.
I also assumed the reddish colour came from something that went 'wrong' during production, perhaps due to a startup of a new bulk ..who knows..

I find the early serial number to be kinda neat, still, all Lugers are unique in their own way. I didn't pay more for it to be that low in #, it came as little bonus

Steinar · 02-03-2007, 04:49 PM

Conny, it sure is

At least the frame, bits and pieces is #6.. not sure about the upper (sear is missing)
Would be great to have two twins

G.T. · 02-03-2007, 05:35 PM

Hi Steinar, nice gun! I Like'em that way.. I like the byf's also... they have always been my favorite since I started collecting ... I just can't decide which I like best.. 41's or 42's... I think 41's were still a bit better fit and finish then 42's... maybe like the P.38's, late 41 was a turning point in quality control... anyway, nice gun Steinar, and as always, best to you, til....lat'r....GT

Steinar · 02-04-2007, 04:04 AM

Thanks for kind words

The downside of finding this piece, is that one other got to go from my little collection.. Well.. just the way things are here in europe

Best to you to GT (btw. let me know when to send package)

reich1900 · 02-09-2007, 08:36 PM

You have a very nice byf41 and I really like the single digit ser#. I have a byf42 and the only plum part is the ejector

Steinar · 02-10-2007, 10:15 AM

Thanks. Plum colour on the ejector would be right on your Luger. I find the byf's very well made and tight.

Balder · 02-10-2007, 11:35 AM

Steinar,

Interesting gun and serial number. I had to go check my two matching byf 42's, their extractors were both black. My 1938 S/42, however, has the plum-colored extractor.

Balder

Steinar · 02-10-2007, 12:33 PM

Balder, both are right I guess, depending on the production bulk of the extractors. But most I have seen, has a slight plum color.

DCCUK · 02-15-2007, 12:39 PM

Quote:

Originally posted by Morgan Kane
Thanks for kind words
The downside of finding this piece, is that one other got to go from my little collection.. Well.. just the way things are here in europe
Best to you to GT (btw. let me know when to send package)

Very nice.. but you say "one other got to go"?
How many pistols are you allowed in Norway?
I would be interested to hear about your firearms laws.

Many Thanks
DCCUK

Lyn Islaub · 02-15-2007, 09:53 PM

Nice pistol Steinar. I've got a 1939 Code 42 that has a purple receiver and was surprised last year to find an Eagle C proofed Walther PP that was purple too. The serial number of the PP dates it to 1942, so I guess the effect shows up randomly through the years.
Lyn

Steinar · 02-16-2007, 04:42 AM

DCCUK, in short.. you would have be an active shooter or a registered gun collector to purchase pistols. being a registered gun collector you can purchase as many guns you want within your limited area of collection. The house must then be approved in various ways by police. -it is not easy to become a collector. As a shooter, you can only have one pistol in the area of competition one is active in.. Two simular 9mm would be impossible/hard to register. If not documented active shooter for some years, pistols must be turned in. Wich would leave us with options like this http://www.members.cox.net/lvrbgun/luger.html
Thank you for the info on the colour Lyn.

02-03-2007, 11:36 AM	#1
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	#6 byf 41 This is my latest Luger byf 41. All matching incl. magazine but with a replacement barrel. The receiver has a more into red colur (?), but with the proper markings. Would apreciate any inputs __________________ Previously known as Morgan Kane

02-03-2007, 11:51 AM	#2
c3006 User Join Date: Sep 2005 Location: east tn Posts: 526 Thanks: 5 Thanked 12 Times in 5 Posts	I find single digit SN# pistols to be fascinating,can I assume this means that this was the 6th pistol made that year since there is no letter suffix. __________________ Men Accustomed unto thier arms and their liberties will never endure the yoke. James Harrington 1776

02-03-2007, 12:13 PM	#3
wlyon Lifer 2X Lifetime Forum Patron Join Date: May 2005 Location: Somewhere in Montana Posts: 2,637 Thanks: 3,174 Thanked 2,561 Times in 956 Posts	Steinar.. Nice byf41. I have a byf 41 that has a reddish colored receiver. According to Jan Still This resulted from " the hardness of the receiver and failure to maintain the proper temperature or chemical strength" Apparently this only happened on the receivers. Bill __________________ Bill Lyon

02-03-2007, 04:15 PM	#7
Conny User Join Date: Dec 2006 Location: Culpeper, Va. Posts: 279 Thanks: 0 Thanked 26 Times in 13 Posts	Here is another #6 luger http://www.sarcoinc.com/luger-variation-new.html __________________ Rangers Lead the Way, Duane Leiker

02-03-2007, 04:27 PM	#8
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Thanks for the input. I also assumed the reddish colour came from something that went 'wrong' during production, perhaps due to a startup of a new bulk ..who knows.. I find the early serial number to be kinda neat, still, all Lugers are unique in their own way. I didn't pay more for it to be that low in #, it came as little bonus __________________ Previously known as Morgan Kane

02-03-2007, 01:19 PM	#4
tracyp User Join Date: Jun 2002 Location: Peoples Republic of Kalifornia Posts: 391 Thanks: 0 Thanked 2 Times in 2 Posts	The 6 with no suffix does not mean it was the 6th Luger made that year. They continued from where they left off the previous year. Tracy

02-03-2007, 01:25 PM	#5
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,902 Thanks: 0 Thanked 1,318 Times in 431 Posts	Tracey is quite right, WWII Mauser production was sequenced differently from WWI DWM and Erfurt--check Still's Third Reich Lugers, p.16. Actually, any part could end up "plum" colored. I have observed plum extractors and ejectors; go to the "Old Owner's Corner" on the home page black bar, and check out Thor's (Ted Green's) "Plum S/42" for a Luger which is almost completely plum. --Dwight

02-03-2007, 01:33 PM	#6
waltherguy User Join Date: Jan 2006 Location: FL Posts: 201 Thanks: 5 Thanked 0 Times in 0 Posts	Really neat pistol Morgan... I have a AC-44 P-38 that has a plum color over most of the gun.. I heard this was a problem with the blueing? __________________ "In a man to man fight the winner is the one who puts an extra round in his magazine" -Field Marshal Erwin Rommel

02-03-2007, 04:49 PM	#9
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Conny, it sure is At least the frame, bits and pieces is #6.. not sure about the upper (sear is missing) Would be great to have two twins __________________ Previously known as Morgan Kane

02-03-2007, 05:35 PM	#10
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,507 Thanks: 1,318 Thanked 3,653 Times in 1,004 Posts	Nice byf! Hi Steinar, nice gun! I Like'em that way.. I like the byf's also... they have always been my favorite since I started collecting ... I just can't decide which I like best.. 41's or 42's... I think 41's were still a bit better fit and finish then 42's... maybe like the P.38's, late 41 was a turning point in quality control... anyway, nice gun Steinar, and as always, best to you, til....lat'r....GT

02-04-2007, 04:04 AM	#11
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Thanks for kind words The downside of finding this piece, is that one other got to go from my little collection.. Well.. just the way things are here in europe Best to you to GT (btw. let me know when to send package) __________________ Previously known as Morgan Kane

02-09-2007, 08:36 PM	#12
reich1900 User Join Date: Jun 2003 Location: Long Island, N.Y. Posts: 59 Thanks: 0 Thanked 6 Times in 5 Posts	You have a very nice byf41 and I really like the single digit ser#. I have a byf42 and the only plum part is the ejector

02-10-2007, 10:15 AM	#13
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Thanks. Plum colour on the ejector would be right on your Luger. I find the byf's very well made and tight. __________________ Previously known as Morgan Kane

02-10-2007, 11:35 AM	#14
Balder User Join Date: Jan 2003 Location: Norway Posts: 288 Thanks: 20 Thanked 34 Times in 19 Posts	Steinar, Interesting gun and serial number. I had to go check my two matching byf 42's, their extractors were both black. My 1938 S/42, however, has the plum-colored extractor. Balder

02-10-2007, 12:33 PM	#15
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Balder, both are right I guess, depending on the production bulk of the extractors. But most I have seen, has a slight plum color. __________________ Previously known as Morgan Kane

02-15-2007, 09:53 PM	#17
Lyn Islaub Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Phoenix, AZ Posts: 435 Thanks: 3 Thanked 152 Times in 72 Posts	Nice pistol Steinar. I've got a 1939 Code 42 that has a purple receiver and was surprised last year to find an Eagle C proofed Walther PP that was purple too. The serial number of the PP dates it to 1942, so I guess the effect shows up randomly through the years. Lyn

02-16-2007, 04:42 AM	#18
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	DCCUK, in short.. you would have be an active shooter or a registered gun collector to purchase pistols. being a registered gun collector you can purchase as many guns you want within your limited area of collection. The house must then be approved in various ways by police. -it is not easy to become a collector. As a shooter, you can only have one pistol in the area of competition one is active in.. Two simular 9mm would be impossible/hard to register. If not documented active shooter for some years, pistols must be turned in. Wich would leave us with options like this http://www.members.cox.net/lvrbgun/luger.html Thank you for the info on the colour Lyn. __________________ Previously known as Morgan Kane

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode