Sear safety

kidvett · 04-02-2002, 12:33 PM

What was the exact function of the sear safety on Police issue LUGERS....This came up last week while talking with a friend about my 42 Banner Eagle L.....Thanks

Hugh · 04-02-2002, 01:08 PM

To prevent firing when the cannon was removed from the frame. As you know, a cartridge left in the chamber can be fired by pressing the front of the sear bar with the top assembly removed from the frame. Apparantly someone didn't think that Policemen were as smart or careful as soldiers; and needed this extra protection from themselves!

John Sabato · 04-02-2002, 02:51 PM

The sear safety was designed to assist in the prevention of accidental discharge by a police officer who had stupidly disassembled his Luger without clearing the chamber. The upper half of a Luger is designed in such a way that it can be fired without being attached to the lower frame by depressing the sear bar when the toggle is cocked and a round is in the chamber (DO NOT TRY THIS AT HOME KIDS!)

The sear is only free to move when the pistol is assembled and the flat steel indicated by the red arrow is resting upon the top of the sideplate.

When the upper half of the Luger is removed from the grip frame (or for that matter when the sideplate is removed) the spring tension of the sear safety inserts a pin into the sear and prevents it's movement.

I hope this explanation and photos are helpful.

regards,

John Sabato

http://boards.rennlist.com/upload/SearSafety.jpg

04-02-2002, 10:48 PM

I learn something everyday. I took the one off my 1918 Erfurt cause it kept coming off. It would be very easy to lose and I'm amazed its not lost already. I was curious as to why it was necessary when the safety worked without it and shoots with the safety off. Thanks! Wasn't it the (here I go again) the Japanese type 94 that could /can be fired by squeezing the sear bar on the left side of the gun? Did you know that you can put a round in a M-60 barrel, put the bolt in, lock it by turning , then hit it with a helmet

and it will shoot?

Roadkill

Ron Wood · 04-03-2002, 10:50 AM

Yes, the 94 can be fired by squeezing the sear bar, and the bar is totally exposed, not protected like the Luger! Now if I only had an M60 and a helmet....

04-02-2002, 12:33 PM	#1
kidvett User Join Date: Jun 2002 Location: Montreal, Quebec Posts: 584 Thanks: 0 Thanked 3 Times in 3 Posts	Sear safety What was the exact function of the sear safety on Police issue LUGERS....This came up last week while talking with a friend about my 42 Banner Eagle L.....Thanks

04-02-2002, 01:08 PM	#2
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	Re: Sear safety To prevent firing when the cannon was removed from the frame. As you know, a cartridge left in the chamber can be fired by pressing the front of the sear bar with the top assembly removed from the frame. Apparantly someone didn't think that Policemen were as smart or careful as soldiers; and needed this extra protection from themselves!

04-02-2002, 02:51 PM	#3
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	Sear safety function The sear safety was designed to assist in the prevention of accidental discharge by a police officer who had stupidly disassembled his Luger without clearing the chamber. The upper half of a Luger is designed in such a way that it can be fired without being attached to the lower frame by depressing the sear bar when the toggle is cocked and a round is in the chamber (DO NOT TRY THIS AT HOME KIDS!) The sear is only free to move when the pistol is assembled and the flat steel indicated by the red arrow is resting upon the top of the sideplate. When the upper half of the Luger is removed from the grip frame (or for that matter when the sideplate is removed) the spring tension of the sear safety inserts a pin into the sear and prevents it's movement. I hope this explanation and photos are helpful. regards, John Sabato http://boards.rennlist.com/upload/SearSafety.jpg

04-02-2002, 10:48 PM	#4
R. Grady/Roadkill Guest Posts: n/a	Re: Sear safety function I learn something everyday. I took the one off my 1918 Erfurt cause it kept coming off. It would be very easy to lose and I'm amazed its not lost already. I was curious as to why it was necessary when the safety worked without it and shoots with the safety off. Thanks! Wasn't it the (here I go again) the Japanese type 94 that could /can be fired by squeezing the sear bar on the left side of the gun? Did you know that you can put a round in a M-60 barrel, put the bolt in, lock it by turning , then hit it with a helmet and it will shoot? Roadkill

04-03-2002, 10:50 AM	#5
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Re: Sear safety function Yes, the 94 can be fired by squeezing the sear bar, and the bar is totally exposed, not protected like the Luger! Now if I only had an M60 and a helmet....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode