6" Barrel Site

mikeruth · 04-06-2002, 04:17 PM

I have a 6" barrel that I want to use. It does not have a

front site. Can I use a front site made for a 4" barrel if

I use the standard Luger rear site?

04-06-2002, 07:27 PM

Ask Hugh Clark. He replaces barrels frequently. You can get his email in the profiles.

Roadkill

Orv Reichert · 04-06-2002, 10:45 PM

Hugh · 04-06-2002, 11:06 PM

Your 6" bbl will require a higher front sight. Some of the older bbls have a higher sight base and the 4" bll sight can be used with them. The new ones that I get from Numrich have the same base height as the 4" bbls and require a higher front sight. The front sight for a Mauser rifle has the same dovetail and is higher, they can be filed to adjust point of aim. You can get them from Numrich; about $15 each. Check the height of the front sight base on your 6" bbl and compare it to the 4" bbl base height to determine if you will need a higher sight.

BILL · 04-06-2002, 11:38 PM

Arf! Arf! I thought it was a post about a website that deals in 6" Luger barrels..wot a disappointment.

"Take me to your Luger!"

04-06-2002, 04:17 PM	#1
mikeruth User Join Date: Jun 2002 Location: Indiana Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts	6" Barrel Site I have a 6" barrel that I want to use. It does not have a front site. Can I use a front site made for a 4" barrel if I use the standard Luger rear site?

04-06-2002, 07:27 PM	#2
R. Grady/Roadkill Guest Posts: n/a	Re: 6" Barrel Site Ask Hugh Clark. He replaces barrels frequently. You can get his email in the profiles. Roadkill

04-06-2002, 10:45 PM	#3
Orv Reichert RIP Join Date: Jun 2002 Location: SW Washington State Posts: 339 Thanks: 0 Thanked 0 Times in 0 Posts	SIGHT (EOM)

04-06-2002, 11:06 PM	#4
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	Re: 6" Barrel Sight Your 6" bbl will require a higher front sight. Some of the older bbls have a higher sight base and the 4" bll sight can be used with them. The new ones that I get from Numrich have the same base height as the 4" bbls and require a higher front sight. The front sight for a Mauser rifle has the same dovetail and is higher, they can be filed to adjust point of aim. You can get them from Numrich; about $15 each. Check the height of the front sight base on your 6" bbl and compare it to the 4" bbl base height to determine if you will need a higher sight.

04-06-2002, 11:38 PM	#5
BILL User Join Date: Jun 2002 Location: Western Washington Posts: 826 Thanks: 0 Thanked 0 Times in 0 Posts	Re: SIGHT Arf! Arf! I thought it was a post about a website that deals in 6" Luger barrels..wot a disappointment. "Take me to your Luger!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode