Please Identify my Luger

04-18-2002, 11:24 PM

DWM with 1921 chamber date, serial 2313b with all numbers matching including firing pin, all the proper Weimar proofs, unit marked 6.D.10. on front grip strap, no sear safety. Can this be a police pistol without a sear safety? Cannot be cocked with safety on. Minty unmarked grips, 95% blue, very good to excellent bore. Came with a repro mag, but I am not sure what would be a proper mag for it.

04-19-2002, 12:23 AM

Mickey, Proper mag for this 1921 dated Weimar Police luger would be a tin plated tube with a wood bottom numbered without suffix letter but with an added #1,2 or3 above or below the Large serial number. Tom h

Ron Wood · 04-19-2002, 01:57 AM

Mickey

No Luger can be cocked (i.e. set the firing pin to fire a round) with the safety on. On early Lugers with the "unrelieved" sear bar, you could not cycle the action with the safty on. After the sear bar was relieved (patent date 1916), if the weapon is loaded and cocked, you can cycle the action to clear the loaded chamber with the safety on.

Thor · 04-19-2002, 03:45 AM

Mickey, sounds like a Weimar Army Luger to me. 6th Division,10th Regiment??? Army and Police shared some of the same acceptance stamps. If it was not drilled for a sear safety, my guess is an Army Gun, serial range shows some in the "b" block as well. Magazine would have been tin or nickle plated sheet steel body with wood bottom (or later replacements of aluminum bottoms) Thor~~~~~

Ted's Luger Strawing Service

04-19-2002, 12:23 AM	#2
Tom Heller Guest Posts: n/a	Re: Please Identify my Luger Mickey, Proper mag for this 1921 dated Weimar Police luger would be a tin plated tube with a wood bottom numbered without suffix letter but with an added #1,2 or3 above or below the Large serial number. Tom h

04-19-2002, 01:57 AM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Re: Please Identify my Luger Mickey No Luger can be cocked (i.e. set the firing pin to fire a round) with the safety on. On early Lugers with the "unrelieved" sear bar, you could not cycle the action with the safty on. After the sear bar was relieved (patent date 1916), if the weapon is loaded and cocked, you can cycle the action to clear the loaded chamber with the safety on.

04-19-2002, 03:45 AM	#4
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Re: Please Identify my Luger Mickey, sounds like a Weimar Army Luger to me. 6th Division,10th Regiment??? Army and Police shared some of the same acceptance stamps. If it was not drilled for a sear safety, my guess is an Army Gun, serial range shows some in the "b" block as well. Magazine would have been tin or nickle plated sheet steel body with wood bottom (or later replacements of aluminum bottoms) Thor~~~~~ Ted's Luger Strawing Service

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-18-2002, 11:24 PM	#1
Mickey Kelly Guest Posts: n/a	Please Identify my Luger DWM with 1921 chamber date, serial 2313b with all numbers matching including firing pin, all the proper Weimar proofs, unit marked 6.D.10. on front grip strap, no sear safety. Can this be a police pistol without a sear safety? Cannot be cocked with safety on. Minty unmarked grips, 95% blue, very good to excellent bore. Came with a repro mag, but I am not sure what would be a proper mag for it.