GT's DWM Style Wood Bases

milesc2 · 11-30-2017, 05:29 PM

I wanted to show off some amazing work GT did for me.

Had him install his DWM style wood bases and upgraded springs in three mags.
I am blown away by the build quality of the pins and bases.
He also repaired some damage on the second mag from the left.
(It was badly deformed around the pin holes)

I placed an original DWM mag on the far left for comparison.
As you can see they are spot on.
He had great communication and turn around time too.

I shot 250 rounds through them yesterday with no malfunction of any kind.
I am going to send him a couple more tomorrow.

Lugerdoc · 12-01-2017, 10:26 AM

I have all types of GT's wood mag bottoms in stock, but don't install them. TH

rhuff · 12-01-2017, 04:53 PM

GT has done three mags for me with the wood bases and his "whiz-bang" springs, and I could not be more pleased. Your mags look great.

G.T. · 12-03-2017, 10:30 AM

If you buy any GT mag bottoms from Luger doc, now, thru the end of Jan. I will install them free!!!

Return postage included! Merry Christmas! til....lat'r....GT....

ithacaartist · 12-03-2017, 12:12 PM

Quote:

Originally Posted by G.T.

If you buy any GT mag bottoms from Luger doc, now, thru the end of Jan. I will install them free!!!

Return postage included! Merry Christmas! til....lat'r....GT....

Sounds good! The bottom blew out on one of my Mec Gar mags earlier this year and fortunately the spring and follower weren't lost in the grass of the backyard range. Good thing I hadn't ordered the new bottom yet!

So, should we mail our patients directly to G.T.'s hospital?

G.T. · 12-13-2017, 07:46 PM

Hi to all, yes, any GT mag bottom purchase from Lugerdoc.. alum or walnut... And, as soon as you get the bottom delivered to you from Tom, send it to me with the mag that is going to receive the bottom and I'll get you all fixed up! Best to all, & Merry Christmas! til...lat'r....GT....

send to:

G.T. Specialties
316 West Straford Drive
Chandler, AZ 85225

G.T. · 02-01-2018, 09:45 PM

Hello to all! I have just finished a bunch of magazine bottoms identical to the DWM type shown earlier in this thread! But, in filling back orders, I have a very few left and these are in reserve for mag repair? BUT, I just sent Lugerdoc a dozen of these excellent bottoms and you can access them thru him... I'm not sure how many more I will make, if any?....

.... these are some of the best I have ever made?... Best to all, til....lat'r....GT...

Lugerdoc · 02-02-2018, 09:47 AM

I also have other GT marked wood mag bottoms at slightly higher prices than the unmarked ones: GERMANY marked, Concentric circle navy type, CAL 9m/m marked and just a couple of the Swiss type with the metal inserts on both sides. TH

sheepherder · 02-02-2018, 10:25 AM

Pardon my ignorance, but what makes a "DWM style" wood magazine base different from any other Luger wood magazine base???

Robert in NC · 02-02-2018, 12:15 PM

Quote:

Originally Posted by sheepherder

Pardon my ignorance, but what makes a "DWM style" wood magazine base different from any other Luger wood magazine base???

They are made with magical DWM wood. (Sorry, couldn't resist.

) I am actually interested in knowing the answer to this question as well, I did not know different manufacturers had different style magazine bases. That's why I read this forum, to learn this kind of stuff!

LU1900 · 02-02-2018, 12:47 PM

Erfurt adds one or two letter with crown on the base , two since 1915 and one after , the wood is a little-little more large too

LU1900 · 02-02-2018, 12:56 PM

Two erfurt one letter and two , and DWM to see little differnce of width

G.T. · 02-02-2018, 02:20 PM

Hi to all, Patrice has it pretty much nailed down and the pictures show the difference! One of the major differences is the radius on the external rim of the knobs? DWM is approx. 3/32" radius (more rounded) and Erfurt is approx. 1/16 radius.. (sharper) This gives the appearance of longer dimension across the bottom as well as the Erfurt bottoms almost always exceed the print... Almost all Erfurt bottoms are quite dark as well.. There are probably more differences, but these are the ones I try to address when filling a customers order.... Best to you, til....lat'r.....GT

Rick W. · 02-02-2018, 02:20 PM

Nobody knows rosettes like G.T.

The finished product is very high quality. Nice to be able to revive a good magazine, specialty pieces and working knowledge are the key, It sure shows in the final results.

Jim Solomon · 02-02-2018, 03:03 PM

Quote:

Originally Posted by G.T.

Hello to all! I have just finished a bunch of magazine bottoms identical to the DWM type shown earlier in this thread! But, in filling back orders, I have a very few left and these are in reserve for mag repair? BUT, I just sent Lugerdoc a dozen of these excellent bottoms and you can access them thru him... I'm not sure how many more I will make, if any?....

.... these are some of the best I have ever made?... Best to all, til....lat'r....GT...

G.T.,
Received my magzines with the Cal 9m/m wooden bottoms today; they are gorgeous. You did a great job on the bottoms and on removing a couple of dents to the magazines. Thank you for your talents.
Jim

DonVoigt · 02-02-2018, 03:13 PM

Erfurt and DWM magazine tubes are also different in detail.

Hoot · 02-07-2018, 02:39 AM

I just got three from G.T. and they are prettier than the Luger they're going with.

11-30-2017, 05:29 PM	#1
milesc2 User Join Date: Dec 2016 Location: Kansas City Posts: 214 Thanks: 324 Thanked 249 Times in 66 Posts	GT's DWM Style Wood Bases I wanted to show off some amazing work GT did for me. Had him install his DWM style wood bases and upgraded springs in three mags. I am blown away by the build quality of the pins and bases. He also repaired some damage on the second mag from the left. (It was badly deformed around the pin holes) I placed an original DWM mag on the far left for comparison. As you can see they are spot on. He had great communication and turn around time too. I shot 250 rounds through them yesterday with no malfunction of any kind. I am going to send him a couple more tomorrow. Attached Thumbnails Last edited by milesc2; 11-30-2017 at 06:48 PM.

12-01-2017, 10:26 AM	#2
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	I have all types of GT's wood mag bottoms in stock, but don't install them. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

12-01-2017, 04:53 PM	#3
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,291 Thanks: 2,709 Thanked 972 Times in 717 Posts	GT has done three mags for me with the wood bases and his "whiz-bang" springs, and I could not be more pleased. Your mags look great. __________________ Need DWM breechblock #21

12-03-2017, 10:30 AM	#4
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,507 Thanks: 1,318 Thanked 3,653 Times in 1,004 Posts	installation! If you buy any GT mag bottoms from Luger doc, now, thru the end of Jan. I will install them free!!! Return postage included! Merry Christmas! til....lat'r....GT....

12-13-2017, 07:46 PM	#6
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,507 Thanks: 1,318 Thanked 3,653 Times in 1,004 Posts	yes, mail the mag to me.... Hi to all, yes, any GT mag bottom purchase from Lugerdoc.. alum or walnut... And, as soon as you get the bottom delivered to you from Tom, send it to me with the mag that is going to receive the bottom and I'll get you all fixed up! Best to all, & Merry Christmas! til...lat'r....GT.... send to: G.T. Specialties 316 West Straford Drive Chandler, AZ 85225

02-01-2018, 09:45 PM	#7
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,507 Thanks: 1,318 Thanked 3,653 Times in 1,004 Posts	mag bottom availability Hello to all! I have just finished a bunch of magazine bottoms identical to the DWM type shown earlier in this thread! But, in filling back orders, I have a very few left and these are in reserve for mag repair? BUT, I just sent Lugerdoc a dozen of these excellent bottoms and you can access them thru him... I'm not sure how many more I will make, if any?.... .... these are some of the best I have ever made?... Best to all, til....lat'r....GT...

02-02-2018, 09:47 AM	#8
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	I also have other GT marked wood mag bottoms at slightly higher prices than the unmarked ones: GERMANY marked, Concentric circle navy type, CAL 9m/m marked and just a couple of the Swiss type with the metal inserts on both sides. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

02-02-2018, 10:25 AM	#9
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,183 Thanks: 1,400 Thanked 4,442 Times in 2,330 Posts	Pardon my ignorance, but what makes a "DWM style" wood magazine base different from any other Luger wood magazine base??? __________________ I like my coffee the way I like my women... ...Cold and bitter...

02-02-2018, 12:47 PM	#11
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 908 Thanks: 42 Thanked 469 Times in 197 Posts	Erfurt adds one or two letter with crown on the base , two since 1915 and one after , the wood is a little-little more large too __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/

02-02-2018, 12:56 PM	#12
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 908 Thanks: 42 Thanked 469 Times in 197 Posts	Two erfurt one letter and two , and DWM to see little differnce of width Attached Thumbnails __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/

02-02-2018, 02:20 PM	#13
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,507 Thanks: 1,318 Thanked 3,653 Times in 1,004 Posts	same only different! Hi to all, Patrice has it pretty much nailed down and the pictures show the difference! One of the major differences is the radius on the external rim of the knobs? DWM is approx. 3/32" radius (more rounded) and Erfurt is approx. 1/16 radius.. (sharper) This gives the appearance of longer dimension across the bottom as well as the Erfurt bottoms almost always exceed the print... Almost all Erfurt bottoms are quite dark as well.. There are probably more differences, but these are the ones I try to address when filling a customers order.... Best to you, til....lat'r.....GT

02-02-2018, 02:20 PM	#14
Rick W. User Join Date: Jun 2002 Posts: 339 Thanks: 81 Thanked 359 Times in 198 Posts	Nobody knows rosettes like G.T. The finished product is very high quality. Nice to be able to revive a good magazine, specialty pieces and working knowledge are the key, It sure shows in the final results.

02-02-2018, 03:13 PM	#16
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,441 Thanked 4,350 Times in 2,040 Posts	Erfurt and DWM magazine tubes are also different in detail. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

02-07-2018, 02:39 AM	#17
Hoot User Join Date: May 2006 Location: Mississippi Posts: 26 Thanks: 82 Thanked 17 Times in 8 Posts	I just got three from G.T. and they are prettier than the Luger they're going with. __________________ It is better to have it and not need it, than to need it and not have it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode