Commercial DWM with unusual extractor

Silver347 · 05-17-2022, 11:20 AM

Brain Trust, it's been a long time since I've come across a decent Luger. This one is a 30 Luger, still working on its exact ID. Take a look at the toggle/extractor. Is this some kind of gunsmith fix or have I stumbled across something unusual? Serial Number 5253, late 20's production?

HerrKaiser · 05-17-2022, 11:58 AM

Does it otherwise function normally? It looks odd, but I don’t think it looks Ugly. Is the breech block…layered? with the screws holding the top bit in place? Please take the toggle train out and take more pictures of possible.

Vlim · 05-17-2022, 12:17 PM

Looks like the extractor was blown out of the breech block, taking the edges with it. Someone then 'fixed' the damage by screwing in fillers.

This is neither a good, nor a safe repair. That breech block should be scrapped and replaced.

Doubs · 05-17-2022, 12:26 PM

Quote:

Originally Posted by Vlim

Looks like the extractor was blown out of the breech block, taking the edges with it. Someone then 'fixed' the damage by screwing in fillers.

This is neither a good, nor a safe repair. That breech block should be scrapped and replaced.

I agree with Vlim 100%... especially the last two sentences. I have two Alphabet Commercial Lugers in the "m" block, one earlier and one later than yours. Both have normal breech blocks.

gunnertwo · 05-17-2022, 05:22 PM

Bubba said, "There, I fixed it!"

G2

sheepherder · 05-17-2022, 07:08 PM

Quote:

Originally Posted by gunnertwo

Bubba said, "There, I fixed it!"

G2

"Here, hold my beer..."

sdmark777 · 05-17-2022, 09:05 PM

Yup, I agree. What they said. An attempt to fix this.....When the ears of the extractor are forced up due to a hot load perhaps and breaks away the metal from the top of the breech block.

lugerholsterrepair · 05-18-2022, 12:15 PM

Bubba ain't a authorized repair depot. That rube Goldberg contraption works loose and your eye could get screwed! DANGER Will Robinson, DANGER!

Mac Cat · 05-18-2022, 04:31 PM

Thanks for sharing !

That is one hilarious modification!
it's just not that hard or expensive to replace the part.

But, I do love it !

sheepherder · 05-18-2022, 07:32 PM

Quote:

Originally Posted by Mac Cat

Thanks for sharing !
That is one hilarious modification!
it's just not that hard or expensive to replace the part.
But, I do love it !

It does show a certain ingenuity and imagination, and a bit of skill. I've had a blown-out extractor/breechblock as well, but this mod never even occurred to me...

05-17-2022, 11:20 AM	#1
Silver347 User Join Date: Apr 2018 Posts: 7 Thanks: 0 Thanked 2 Times in 2 Posts	Commercial DWM with unusual extractor Brain Trust, it's been a long time since I've come across a decent Luger. This one is a 30 Luger, still working on its exact ID. Take a look at the toggle/extractor. Is this some kind of gunsmith fix or have I stumbled across something unusual? Serial Number 5253, late 20's production? Attached Thumbnails

05-17-2022, 11:58 AM	#2
HerrKaiser User Join Date: Feb 2018 Location: South Carolina Posts: 848 Thanks: 784 Thanked 861 Times in 411 Posts	Does it otherwise function normally? It looks odd, but I don’t think it looks Ugly. Is the breech block…layered? with the screws holding the top bit in place? Please take the toggle train out and take more pictures of possible. __________________ -QM Looking for Mauser S/42 toggle train #22

05-17-2022, 09:05 PM	#7
sdmark777 User Join Date: Apr 2018 Posts: 288 Thanks: 695 Thanked 672 Times in 174 Posts	Yup, I agree. What they said. An attempt to fix this.....When the ears of the extractor are forced up due to a hot load perhaps and breaks away the metal from the top of the breech block. Attached Thumbnails

05-18-2022, 12:15 PM	#8
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,940 Thanked 3,124 Times in 1,434 Posts	Bubba ain't a authorized repair depot. That rube Goldberg contraption works loose and your eye could get screwed! DANGER Will Robinson, DANGER! __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 l[email protected] 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-17-2022, 12:17 PM	#3
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,989 Times in 1,205 Posts	Looks like the extractor was blown out of the breech block, taking the edges with it. Someone then 'fixed' the damage by screwing in fillers. This is neither a good, nor a safe repair. That breech block should be scrapped and replaced.

05-17-2022, 05:22 PM	#5
gunnertwo User Join Date: Jan 2010 Location: Nampa, Idaho Posts: 623 Thanks: 826 Thanked 930 Times in 363 Posts	Bubba said, "There, I fixed it!" G2

05-18-2022, 04:31 PM	#9
Mac Cat Lifer Lifetime Forum Patron Join Date: Apr 2015 Location: Austin, Texas Posts: 733 Thanks: 2,100 Thanked 610 Times in 329 Posts	Thanks for sharing ! That is one hilarious modification! it's just not that hard or expensive to replace the part. But, I do love it !