How To Aim A 1970s

alterfritz · 01-23-2009, 09:45 PM

Hi all,

I finally managed to get my first Luger. It's a 1970s Mauser with 6" barrel. For me being a .22 shooter most of the time, this was an interesting experience in the range to say the least.

Now, I aimed it as I am used to from my .22 Ruger Target pistol, I aligned the top of the front sight with the top of the rear sight and shot a few holes in a papertarget at about 7 or 8 yards. I had the feeling that it was shooting too low. I was experimenting with different ways of aligning the sights when I shot the fixtures and the strings came all down on me

so I gave up for this week.

However I was wondering, especially after reading that there are various aiming problems with various types of Lugers, is there a general rule of thumb I should be keeping in mind for this particular type? Is it known to shoot low? Is there a standard way to align the sights for this model? the rear sight is fixed so I cant adjust anything at all.

Thanks for any hint

Ron Smith · 01-23-2009, 10:51 PM

The only way to correctly adjust is to find a slightly lower front sight blade. I have seen several of the 1970s Mauser Lugers with the sights mutilated due to shooters using files to regulate the sights.

Vlim · 01-24-2009, 07:44 AM

They are sighted for and testfired at 25 meters, as opposed to the P08 which was sighted for and testfired at 50 meters.

With a 29/70-ish version in .30 luger with 6 inch barrel, point of aim (top of the sights line up) should be point of impact. Flinching can produce low shots as well, a luger will usually shoot higher than point of aim, not lower.

With the P08 it helps to ignore the rear sight and just point the front sight into the general direction

The combination of a P08 and subsonic 145gr bullets considerably lowers the point of impact.

alterfritz · 01-24-2009, 10:07 PM

Thanks. It's a 9mm I should have added. I will try it out again next week at the range with my benchrest and start at a short distance. I like to approach those problems systematically. I think once I know how the gun behaves at various distances, I can simply adjust the point of aim instead of filing away the front sight.

alterfritz · 01-28-2009, 09:43 PM

Just to add the result here, I was shooting my Luger today with benchrest and was able to hit bullseye at around 7-10 meters with the top of the sights aligned. I guess it was me in the first place who messed up. It looks like a 1970s is pretty accurate at that distance when taking the shooeter out of the euation, I was surprised. Even freestanding later was pretty good once I got the hang of it

01-23-2009, 09:45 PM	#1
alterfritz User Join Date: Nov 2008 Location: California Posts: 63 Thanks: 3 Thanked 3 Times in 3 Posts	How To Aim A 1970s Hi all, I finally managed to get my first Luger. It's a 1970s Mauser with 6" barrel. For me being a .22 shooter most of the time, this was an interesting experience in the range to say the least. Now, I aimed it as I am used to from my .22 Ruger Target pistol, I aligned the top of the front sight with the top of the rear sight and shot a few holes in a papertarget at about 7 or 8 yards. I had the feeling that it was shooting too low. I was experimenting with different ways of aligning the sights when I shot the fixtures and the strings came all down on me so I gave up for this week. However I was wondering, especially after reading that there are various aiming problems with various types of Lugers, is there a general rule of thumb I should be keeping in mind for this particular type? Is it known to shoot low? Is there a standard way to align the sights for this model? the rear sight is fixed so I cant adjust anything at all. Thanks for any hint

01-23-2009, 10:51 PM	#2
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	The only way to correctly adjust is to find a slightly lower front sight blade. I have seen several of the 1970s Mauser Lugers with the sights mutilated due to shooters using files to regulate the sights. __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-24-2009, 07:44 AM	#3
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,988 Times in 1,205 Posts	They are sighted for and testfired at 25 meters, as opposed to the P08 which was sighted for and testfired at 50 meters. With a 29/70-ish version in .30 luger with 6 inch barrel, point of aim (top of the sights line up) should be point of impact. Flinching can produce low shots as well, a luger will usually shoot higher than point of aim, not lower. With the P08 it helps to ignore the rear sight and just point the front sight into the general direction The combination of a P08 and subsonic 145gr bullets considerably lowers the point of impact.

01-24-2009, 10:07 PM	#4
alterfritz User Join Date: Nov 2008 Location: California Posts: 63 Thanks: 3 Thanked 3 Times in 3 Posts	Thanks. It's a 9mm I should have added. I will try it out again next week at the range with my benchrest and start at a short distance. I like to approach those problems systematically. I think once I know how the gun behaves at various distances, I can simply adjust the point of aim instead of filing away the front sight.

01-28-2009, 09:43 PM	#5
alterfritz User Join Date: Nov 2008 Location: California Posts: 63 Thanks: 3 Thanked 3 Times in 3 Posts	Just to add the result here, I was shooting my Luger today with benchrest and was able to hit bullseye at around 7-10 meters with the top of the sights aligned. I guess it was me in the first place who messed up. It looks like a 1970s is pretty accurate at that distance when taking the shooeter out of the euation, I was surprised. Even freestanding later was pretty good once I got the hang of it