Troubleshooting a 1900 DWM AE (.30 Luger)

S/A86 · 02-07-2013, 05:16 PM

Luger Doc sent me flat mainspring, which I have installed. Yes, I have now bled on this fine gun.

The toggle, which is now under mianspring pressure, does not go all the way into battery.

Of what would this typically arise?

S/A86

ithacaartist · 02-07-2013, 05:36 PM

If you are cycling the action by hand, make sure to release it so it snaps shut: pull all the way back, then let go of it entirely. If you're damping this action by holding onto it, the last little bit of distance it needs to go fully into battery and flatten out/lock the toggle's knee joint may not be achieved, requiring a bump by hand to get it there.

S/A86 · 02-08-2013, 01:02 AM

I tore it apart, reassembled it, and voila! It works, my 1900 DWM AE in .30 Luger.

Lugerdoc · 02-10-2013, 10:49 AM

Another common problem with the M1900, is if someone installs a standard PO8 recoil (S shaped) link, vise the shorter M1900 type. The toggle will not fully open. TH

02-07-2013, 05:16 PM	#1
S/A86 User Join Date: Jan 2013 Posts: 19 Thanks: 0 Thanked 5 Times in 2 Posts	Troubleshooting a 1900 DWM AE (.30 Luger) Luger Doc sent me flat mainspring, which I have installed. Yes, I have now bled on this fine gun. The toggle, which is now under mianspring pressure, does not go all the way into battery. Of what would this typically arise? S/A86

02-07-2013, 05:36 PM	#2
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,347 Thanks: 7,285 Thanked 2,579 Times in 1,366 Posts	If you are cycling the action by hand, make sure to release it so it snaps shut: pull all the way back, then let go of it entirely. If you're damping this action by holding onto it, the last little bit of distance it needs to go fully into battery and flatten out/lock the toggle's knee joint may not be achieved, requiring a bump by hand to get it there. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

02-10-2013, 10:49 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Another common problem with the M1900, is if someone installs a standard PO8 recoil (S shaped) link, vise the shorter M1900 type. The toggle will not fully open. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-08-2013, 01:02 AM	#3
S/A86 User Join Date: Jan 2013 Posts: 19 Thanks: 0 Thanked 5 Times in 2 Posts	I tore it apart, reassembled it, and voila! It works, my 1900 DWM AE in .30 Luger.