einstecklauf - conversion kit

wolfganggo · 03-14-2021, 09:31 AM

gents,

this one i got a few days ago
i cant find exact this implementation at sturgees or görtz
... pls see the longer thread at the end

could this be a afterwar part maybe faked with WaA number ... ??

information appreciated

regards from austria

wolfganggo ..

.

George Anderson · 03-14-2021, 10:16 AM

It's a muzzle protector for when cleaning the barrel. Weimar police issue.

wolfganggo · 03-14-2021, 11:08 AM

Quote:

Originally Posted by George Anderson

It's a muzzle protector for when cleaning the barrel. Weimar police issue.

why you are thinking police issue ??

the WaA number i suppose is 84, kongsberg ... ??
very strange ..

STEINBVG · 03-14-2021, 11:22 AM

Must be a spring there.

STEINBVG · 03-14-2021, 11:33 AM

If somebody argues that a tight seal can,t be achieved on simply contact of matching machined surfaces, (perhaps like a flared pipe connection?), here,s a new design for Glock silencer which contacts the barrel only during a shot. The silencer is mounted on the rail.

wolfganggo · 03-14-2021, 12:31 PM

interesting

yes, there is a spring
diameter of bore is 10,4 mm

has anyone more details to this silencer on cmr firearms ??

STEINBVG · 03-14-2021, 01:58 PM

Quote:

Originally Posted by wolfganggo

interesting

yes, there is a spring
diameter of bore is 10,4 mm

has anyone more details to this silencer on cmr firearms ??

What is the thread size? How tight the barrel crown seats against the adapter? I wonder if one to put a small piece of paper towel in the bore, right under the connection, and sprayed WD40 from outside, would it sip through and wet the paper?

Ha, perfect clearance 10.4-9mm= .40-.35”= ~.05.
I read somewhere 60 thousands is a perfect oversize of silencer for a given bore. It too loose, not too tight to hit the baffles god forbid there,s slight axial misalignment.

wolfganggo · 03-14-2021, 06:29 PM

i will check within the nxt. days ....

good night
wolfganggo .....

03-14-2021, 09:31 AM	#1
wolfganggo User Join Date: Feb 2008 Location: near vienna Posts: 93 Thanks: 1 Thanked 81 Times in 18 Posts	einstecklauf - conversion kit gents, this one i got a few days ago i cant find exact this implementation at sturgees or görtz ... pls see the longer thread at the end could this be a afterwar part maybe faked with WaA number ... ?? information appreciated regards from austria wolfganggo .. . Attached Thumbnails

03-14-2021, 11:22 AM	#4
STEINBVG User Join Date: Jan 2021 Location: NEW JERSEY Posts: 143 Thanks: 117 Thanked 176 Times in 70 Posts	Silencer adapter? Must be a spring there. Attached Thumbnails

03-14-2021, 11:33 AM	#5
STEINBVG User Join Date: Jan 2021 Location: NEW JERSEY Posts: 143 Thanks: 117 Thanked 176 Times in 70 Posts	Tight seal? If somebody argues that a tight seal can,t be achieved on simply contact of matching machined surfaces, (perhaps like a flared pipe connection?), here,s a new design for Glock silencer which contacts the barrel only during a shot. The silencer is mounted on the rail. Attached Thumbnails

03-14-2021, 12:31 PM	#6
wolfganggo User Join Date: Feb 2008 Location: near vienna Posts: 93 Thanks: 1 Thanked 81 Times in 18 Posts	interesting yes, there is a spring diameter of bore is 10,4 mm has anyone more details to this silencer on cmr firearms ?? Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-14-2021, 10:16 AM	#2
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,529 Times in 787 Posts	It's a muzzle protector for when cleaning the barrel. Weimar police issue.

03-14-2021, 06:29 PM	#8
wolfganggo User Join Date: Feb 2008 Location: near vienna Posts: 93 Thanks: 1 Thanked 81 Times in 18 Posts	i will check within the nxt. days .... good night wolfganggo .....