Clark Our Own~ - Page 2

Dick Herman · 01-01-2018, 10:54 PM

After the successful testing of the Colt Model 1909, John Browning designed the .45 Caliber Prototype 1910. This prototype was a result of complementary praise by the Ordnance Board of the Luger anatomical features. This prototype has a slant grip for more natural grip and natural point. Browning demonstrated and tested the .45 Caliber Prototype 1910 at Fort Meyer in February of 1910. This prototype was the predecessor of the Colt Model 1911 Government Model.

Sergio Natali · 01-02-2018, 08:50 AM

[QUOTE=sheepherder;311981]Hmmmm,...Lessee...Yep, I get 74º on a Colt Gov't Model frame...(Measured on the front gripstrap)...

Thanks to John for pointing that out!

FWIK the 1911 grip angle should be 118 degrees.

Ron Wood · 01-02-2018, 01:19 PM

[QUOTE=luger.parabellum;312009]

Quote:

Originally Posted by sheepherder

FWIK the 1911 grip angle should be 118 degrees.

It depends on which side of the angle you measure. The 118 +/- degrees is the compliment of 74 +/- degrees. Added together they make 180 degrees, i.e. the straight horizontal line that the grip angle is measured from...118 degrees on the trigger guard side, 74 degrees on the grip side.
Ron

sheepherder · 01-02-2018, 02:16 PM

Quote:

Originally Posted by Ron Wood

It depends on which side of the angle you measure...

You got your quote screwed up. I'm sheepherder; he's luger.parabellum.

Here's some food for thought...Pic of blueprint attached...

90º minus 17º 30' = 72º 30'...(72 1/2 degrees)...

Ron Wood · 01-02-2018, 07:08 PM

Yeah Richard, I messed up when I omitted parts of his post but didn't go far enough to eliminate the reference to your alias...I apologize for the apparent misquote.
Your food for thought is indeed interesting. Odd that the blueprint spec matches your aftermarket frame but not the original Colt frame.
Ron

sheepherder · 01-02-2018, 08:27 PM

Quote:

Originally Posted by Ron Wood

Your food for thought is indeed interesting. Odd that the blueprint spec matches your aftermarket frame but not the original Colt frame.
Ron

Ron, I have several copies/sets of 1911 blueprints, from Dept of the Army Rock Island Arsenal, Dept of the Army Springfield Arsenal, and from US Armament Research & Development Command, Dover New Jersey. They have mixed dates on the prints within the sets, some are marked revisions, some not. There's 1928 dates, 1936, even a 1960. I stopped checking.

In addition, I imagine Colt made numerous changes to their Government Model over the years. The grip angle may have been one of them.

Sergio Natali · 01-03-2018, 05:20 AM

[QUOTE=Ron Wood;312014]

Quote:

Originally Posted by luger.parabellum

It depends on which side of the angle you measure. The 118 +/- degrees is the compliment of 74 +/- degrees. Added together they make 180 degrees, i.e. the straight horizontal line that the grip angle is measured from...118 degrees on the trigger guard side, 74 degrees on the grip side.
Ron

Of course 118 degrees is measured at the trigger guard side.

01-02-2018, 08:50 AM	#22
Sergio Natali User Join Date: Feb 2013 Location: Somewhere in Northern Italy Posts: 2,646 Thanks: 1,082 Thanked 1,783 Times in 1,007 Posts	[QUOTE=sheepherder;311981]Hmmmm,...Lessee...Yep, I get 74º on a Colt Gov't Model frame...(Measured on the front gripstrap)... Thanks to John for pointing that out! FWIK the 1911 grip angle should be 118 degrees. __________________ "Originality can't be restored and should be at the top of any collector's priority list.

01-02-2018, 07:08 PM	#25
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Yeah Richard, I messed up when I omitted parts of his post but didn't go far enough to eliminate the reference to your alias...I apologize for the apparent misquote. Your food for thought is indeed interesting. Odd that the blueprint spec matches your aftermarket frame but not the original Colt frame. Ron __________________ If it's made after 1918...it's a reproduction

01-01-2018, 10:54 PM	#21
Dick Herman User Join Date: Apr 2006 Location: Texas Posts: 302 Thanks: 496 Thanked 354 Times in 138 Posts	After the successful testing of the Colt Model 1909, John Browning designed the .45 Caliber Prototype 1910. This prototype was a result of complementary praise by the Ordnance Board of the Luger anatomical features. This prototype has a slant grip for more natural grip and natural point. Browning demonstrated and tested the .45 Caliber Prototype 1910 at Fort Meyer in February of 1910. This prototype was the predecessor of the Colt Model 1911 Government Model.