Small pin - takedown lever - Page 2

John Sabato · 04-09-2010, 09:39 AM

The flutes in your latest photo make all the difference in the world... they were just not visible in your previous photos. This pin is genuine and original to this gun IMHO.

ErikXIV · 04-09-2010, 12:01 PM

Thanks, John, Norm Postino, your comments have been valuable to me.

Now I will jump

into my Sherlock-shoes and hat and do some research on Tikkakoski and Finish lugers!

Rgds,
/Erik

sheepherder · 04-09-2010, 09:56 PM

Quote:

Originally Posted by ErikXIV

Hi, no Im not sure at all. I assumed that was the case since he bought it in 1948. If the gun was fitted with this barrel by the Fins, wold there be any special marks for me to look for?

I'm not sure about any special proof marks...but is there anything on the front sight??? Letters; numbers; any marks??? On the blade itself or on the barrel band (or the stepped base)???

ErikXIV · 04-12-2010, 03:42 AM

So far I have only noted the "T" in a circle on the upper side of the barrel. I'll check the front sight too.

ErikXIV · 04-12-2012, 09:01 AM

Two years (!) later I remebered to check the barrel - No more visual markings than the 'T' in a circle.

Rgds,
/E

sheepherder · 04-12-2012, 09:45 AM

Quote:

Originally Posted by ErikXIV

Two years (!) later I remebered to check the barrel...

S'OK...We weren't holding our breaths...

These 4 3/4" barrel Finn Lugers are IMHO quite desirable...and worth more than an equivalent "German" Luger (again, just my opinion)...

If you have finished cleaning it up ( 2 yrs is about right), more pics would be nice...taken in subdued light (like outside on cloudy day) and in hi-res (1100 x 1100 would be nice) - left and right pics of complete pistol...

What kind of magazine does it have??? IIRC, Finn mags were also somewhat different...Maybe a pic of bottom [aluminum plug] of mag...Any marks...Welded seam, stamped & folded, extruded...???...

Lugerdoc · 04-12-2012, 12:09 PM

Erik, Most Tika arsenal replacement barrel are 5" long including the threaded area that screws into the reciever. I have new orig type TD lever springs available @$25 postpaid. TH

ErikXIV · 04-13-2012, 09:34 AM

OK, thanks good to know!

sheepherder · 04-13-2012, 10:20 AM

Quote:

Originally Posted by Lugerdoc

Most Tika arsenal replacement barrel are 5" long including the threaded area that screws into the reciever.

Tom didn't post a price [coff *Tom!* coff] but I thought it would be interesting to post a pic of three barrels I have lying here...Top is a Tikkakoski [9mm] 120mm barrel; middle is a military [9mm] 100mm barrel; bottom is a commercial [7.65mm] 96mm barrel...

(Macro pics tend to 'fisheye', so I tried a long-range shot so the ends wouldn't appear 'warped')

04-09-2010, 09:39 AM	#21
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	The flutes in your latest photo make all the difference in the world... they were just not visible in your previous photos. This pin is genuine and original to this gun IMHO. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

04-12-2012, 12:09 PM	#27
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Erik, Most Tika arsenal replacement barrel are 5" long including the threaded area that screws into the reciever. I have new orig type TD lever springs available @$25 postpaid. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

04-09-2010, 12:01 PM	#22
ErikXIV User Join Date: Mar 2010 Location: Falun, Dalarna, Sweden Posts: 31 Thanks: 4 Thanked 1 Time in 1 Post	Thanks, John, Norm Postino, your comments have been valuable to me. Now I will jump into my Sherlock-shoes and hat and do some research on Tikkakoski and Finish lugers! Rgds, /Erik

04-12-2010, 03:42 AM	#24
ErikXIV User Join Date: Mar 2010 Location: Falun, Dalarna, Sweden Posts: 31 Thanks: 4 Thanked 1 Time in 1 Post	So far I have only noted the "T" in a circle on the upper side of the barrel. I'll check the front sight too.

04-12-2012, 09:01 AM	#25
ErikXIV User Join Date: Mar 2010 Location: Falun, Dalarna, Sweden Posts: 31 Thanks: 4 Thanked 1 Time in 1 Post	Two years (!) later I remebered to check the barrel - No more visual markings than the 'T' in a circle. Rgds, /E

04-13-2012, 09:34 AM	#28
ErikXIV User Join Date: Mar 2010 Location: Falun, Dalarna, Sweden Posts: 31 Thanks: 4 Thanked 1 Time in 1 Post	OK, thanks good to know!