Does Anyone Know If Mike Krause Is Still Producing His 45

cirelaw · 05-13-2007, 10:21 AM

I was watching the History Channels' Tales Of The Gun, Luger Segment which is a must see, and is available, from the History Channel, It did a segment on Mike Krause, performing his Magic. I would love to find out more information, reguarding his where to contact him, Im sure Ron knows, Im buying him a teeshirt for Christmas, 'ASK RON, HE'LL KNOW! my regards eric

Blastattack · 09-15-2012, 10:27 AM

That's a very good question. Might want to give the shop a call today: 650-571-7583

Ron Wood · 09-15-2012, 03:16 PM

That's a good number. His website is http://www.krausewerk.com/

drbuster · 09-15-2012, 08:46 PM

Mike Kraus' website is not maintained. If you want to get in touch with him, the phone number above from Blastattack is correct. His shop hours are Tuesday-Saturday, noon to 5 PM Pacific tme.

drbuster · 09-15-2012, 10:57 PM

I had lunch with Mike Krause today. It is my understanding that he has about 2-3 more unfinished or partially finished .45 luger frames and can assemble them BUT it will cost at least $20K for one now. At least one local small manufacturer was interested in buying the blueprints but apparently had second thoughts when they realized how much labor they require. It is really a dying art. Those out there who already own one of his .45 lugers know they are the best and are cherished.

glock30 · 02-04-2013, 11:23 PM

Technically No, that show is very old.

Thor · 02-05-2013, 09:15 AM

I thought his Baby Lugers were interesting. I think Ralph said his was borrowed to reverse engineer it.

I found the article that was in Guns & Ammo February 1999 called "Baby Boomer". Narrow (smooth sides) toggle width, 21 ounces, carbon steel, 6&1/2" OAL, 2 & 7/8" Barrel length. Six round mag in 32 ACP. The originals were very limited, 4 at least were made, two in 32 ACP, and two in 380 ACP, those were made by DWM's head engineer Heinrich Hoffman.
This is the one Ralph owned. I took this picture 2002 at the last Luger Forum convention. Sorry it is blurry.

alanint · 02-05-2013, 09:24 AM

Interesting outer safety lever modification!

drbuster · 02-05-2013, 10:59 AM

Mike Krause still has at least one, and maybe two, of these little beauties, in cases, for sale. They aren't cheap and shouldn't be!

cirelaw · 02-05-2013, 11:54 AM

Mike Krause was featured on the Historys "Tales Of The Gun' LUGERS. You can watch the entire segment on You Tube for free! Eric

cirelaw · 02-05-2013, 12:16 PM

Is John Martz still making lugers?

G.T. · 02-06-2013, 12:24 PM

Hello to all, I talked to John yesterday, and although he feels well, he is not currently accepting any work... He's my master Lugersmith, none better for me... best to all, til...lat'r...GT

George Anderson · 02-06-2013, 01:10 PM

[QUOTE=Thor;228637]I thought his Baby Lugers were interesting. I think Ralph said his was borrowed to reverse engineer it.

Ralph Shattuck's baby Luger was one of those made by Mike Kraus.

Thor · 02-06-2013, 05:23 PM

Well, I was not there when it was ordered, I just repeated what Ralph told me. Well, the gun does look pretty new in the case, I must have misunderstood Ralph. Here is an excerpt what I wrote in 2000 after a visit to his Luger Cave.

"We got to look and hold Georg Luger's Personal 7 Shot-protype and the August Weiss's personal Luger, only one each of those every made. We also checked out the baby Luger that Mike Krause copied to make his run of copies of this weapon. What struck me was the very small size, much smaller than Georg's snubby!"

Ron Wood · 02-06-2013, 05:38 PM

Unfortunately Ted, Ralph was not reluctant to spin a yarn. George is correct, Ralph's gun was a repro.

cirelaw · 02-06-2013, 07:18 PM

I sent John Martz a copy of the book he was in! A no brainer! Eric

Lugerdoc · 02-10-2013, 11:02 AM

I believe that John's custom lugers may hold the record of the most Guns & Ammo covers of anyone. His MSTR (Martz safety toggle release) invention was covered some years ago with a photo of John and his shop, in the 1984 issue of the German "Waffen Digest". TH

05-13-2007, 10:21 AM	#1
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Does Anyone Know If Mike Krause Is Still Producing His 45 I was watching the History Channels' Tales Of The Gun, Luger Segment which is a must see, and is available, from the History Channel, It did a segment on Mike Krause, performing his Magic. I would love to find out more information, reguarding his where to contact him, Im sure Ron knows, Im buying him a teeshirt for Christmas, 'ASK RON, HE'LL KNOW! my regards eric

09-15-2012, 03:16 PM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,178 Times in 1,703 Posts	That's a good number. His website is http://www.krausewerk.com/ __________________ If it's made after 1918...it's a reproduction

02-05-2013, 09:15 AM	#7
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	I thought his Baby Lugers were interesting. I think Ralph said his was borrowed to reverse engineer it. I found the article that was in Guns & Ammo February 1999 called "Baby Boomer". Narrow (smooth sides) toggle width, 21 ounces, carbon steel, 6&1/2" OAL, 2 & 7/8" Barrel length. Six round mag in 32 ACP. The originals were very limited, 4 at least were made, two in 32 ACP, and two in 380 ACP, those were made by DWM's head engineer Heinrich Hoffman. This is the one Ralph owned. I took this picture 2002 at the last Luger Forum convention. Sorry it is blurry. __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email [email protected] ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."

02-05-2013, 12:16 PM	#11
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Is John Martz still making lugers? Attached Thumbnails

02-06-2013, 12:24 PM	#12
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,507 Thanks: 1,318 Thanked 3,653 Times in 1,004 Posts	John V Martz Hello to all, I talked to John yesterday, and although he feels well, he is not currently accepting any work... He's my master Lugersmith, none better for me... best to all, til...lat'r...GT

09-15-2012, 10:27 AM	#2
Blastattack User Join Date: Aug 2010 Location: Calgary AB Posts: 44 Thanks: 8 Thanked 8 Times in 8 Posts	That's a very good question. Might want to give the shop a call today: 650-571-7583

09-15-2012, 08:46 PM	#4
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Mike Kraus' website is not maintained. If you want to get in touch with him, the phone number above from Blastattack is correct. His shop hours are Tuesday-Saturday, noon to 5 PM Pacific tme.

09-15-2012, 10:57 PM	#5
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	I had lunch with Mike Krause today. It is my understanding that he has about 2-3 more unfinished or partially finished .45 luger frames and can assemble them BUT it will cost at least $20K for one now. At least one local small manufacturer was interested in buying the blueprints but apparently had second thoughts when they realized how much labor they require. It is really a dying art. Those out there who already own one of his .45 lugers know they are the best and are cherished.

02-04-2013, 11:23 PM	#6
glock30 User Join Date: Aug 2011 Location: Obama LAND Posts: 206 Thanks: 18 Thanked 17 Times in 14 Posts	Technically No, that show is very old.

02-05-2013, 09:24 AM	#8
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	Interesting outer safety lever modification!

02-05-2013, 10:59 AM	#9
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Mike Krause still has at least one, and maybe two, of these little beauties, in cases, for sale. They aren't cheap and shouldn't be!

02-05-2013, 11:54 AM	#10
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Mike Krause was featured on the Historys "Tales Of The Gun' LUGERS. You can watch the entire segment on You Tube for free! Eric

02-06-2013, 01:10 PM	#13
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,529 Times in 787 Posts	[QUOTE=Thor;228637]I thought his Baby Lugers were interesting. I think Ralph said his was borrowed to reverse engineer it. Ralph Shattuck's baby Luger was one of those made by Mike Kraus.

02-06-2013, 05:23 PM	#14
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Well, I was not there when it was ordered, I just repeated what Ralph told me. Well, the gun does look pretty new in the case, I must have misunderstood Ralph. Here is an excerpt what I wrote in 2000 after a visit to his Luger Cave. "We got to look and hold Georg Luger's Personal 7 Shot-protype and the August Weiss's personal Luger, only one each of those every made. We also checked out the baby Luger that Mike Krause copied to make his run of copies of this weapon. What struck me was the very small size, much smaller than Georg's snubby!" __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email [email protected] ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."

02-06-2013, 05:38 PM	#15
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,178 Times in 1,703 Posts	Unfortunately Ted, Ralph was not reluctant to spin a yarn. George is correct, Ralph's gun was a repro. __________________ If it's made after 1918...it's a reproduction

02-06-2013, 07:18 PM	#16
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	I sent John Martz a copy of the book he was in! A no brainer! Eric

02-10-2013, 11:02 AM	#17
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	I believe that John's custom lugers may hold the record of the most Guns & Ammo covers of anyone. His MSTR (Martz safety toggle release) invention was covered some years ago with a photo of John and his shop, in the 1984 issue of the German "Waffen Digest". TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]