1940 "42" code

Zorba · 07-27-2013, 09:26 PM

As promised, some pix of my newly acquired Luger. I took these in high resolution, so if anyone wants to see something larger, I can probably accommodate.

First three, just the display box and a bad shot of me holding it...

Zorba · 07-27-2013, 09:29 PM

More...

Zorba · 07-27-2013, 09:31 PM

Still more...

Zorba · 07-27-2013, 09:34 PM

Now the questions...

I was under the impression that the "correct" magazine for this year was blued.

What's up with the stamping on the inside of the RH grip? There's also something hand written that I can't make out - I might try a rubbing to see if it will come clear.

From the view of holding the gun, the normal barrel proof is at the 3 O'clock position. There is another proof (Unpictured) that I just noticed at about the 10:30 position. Usual I assume.

Zorba · 07-27-2013, 09:46 PM

Of course, it goes without saying that this is Hitler's/Himmler's/Goring's/Jodl's/Rommel's personal sidearm!

lugersrkewl · 07-27-2013, 10:53 PM

nice ww2 piece , have you checked the internals? looks like your missing the takedown lever spring. Did it come with that case?
Did you find it local or abroad?

Patronen · 07-27-2013, 11:04 PM

With regards to the magazine, the aluminum bottom could have been switched onto a different earlier nickled tube. The bottom looks to be one that would go with a blued tube for a 1939/42 P08.

Edward Tinker · 07-27-2013, 11:50 PM

nice luger, my first of 2 lugers was a 1940 / 42

Zorba · 07-27-2013, 11:57 PM

Quote:

Originally Posted by lugersrkewl

nice ww2 piece , have you checked the internals? looks like your missing the takedown lever spring. Did it come with that case?
Did you find it local or abroad?

It was a GB purchase out of Tennessee.

Internals are great, nice and clean and all matching numbers. I am, however, ignorant of the takedown lever spring...

Case came from England.

mrerick · 07-28-2013, 12:02 AM

Congratulations on a nice WW-II Mauser Luger. I particularly like these because they are so well made.

If you need the little curved L shaped take down lever spring, I think you can get them from Tom Heller "lugerdoc". It slides into the bottom of the hole the take down lever fits into to provide a detent that keeps it in the locked position while firing. If it's missing, the take down lever will slide right out when you've got it in dis-assembly position.

I have to check, but I may have a blue body magazine that had it's base swapped improperly from a nickel plate one. If so, I'll let you know. Perhaps we can have GT swap them for us...

Marc

Ron Wood · 07-28-2013, 12:03 AM

Great looking gun. I will reserve comment on the model holding the Luger

.

DavidJayUden · 07-28-2013, 12:12 AM

The nail polish goes well with the P08...
dju

Zorba · 07-28-2013, 12:26 AM

Quote:

Originally Posted by mrerick

If you need the little curved L shaped take down lever spring, I think you can get them from Tom Heller "lugerdoc". It slides into the bottom of the hole the take down lever fits into to provide a detent that keeps it in the locked position while firing. If it's missing, the take down lever will slide right out when you've got it in dis-assembly position.

The takedown lever *does* detent into place - rather well. With that said, I'm not seeing a spring, but I'm researching this now. Any pointers to a picture would be helpful!

Zorba · 07-28-2013, 12:28 AM

Quote:

Originally Posted by Ron Wood

Great looking gun. I will reserve comment on the model holding the Luger

.

Quote:

Originally Posted by DavidJayUden

The nail polish goes well with the P08...
dju

Yea, it wasn't the most glam shot, was it? What do you expect for "quick"? I was threatening the guys on a different forum that I was going to post a picture holding the Luger while wearing one of my dance costumes - but that takes at least an hour of prep time, so I haven't (yet)!

Zorba · 07-28-2013, 12:32 AM

Further fumbling popped the takedown lever out of the gun - no spring. I'll PM LugerDoc.

Thanx for the sharp eyes!

DavidJayUden · 07-28-2013, 01:23 AM

With the spring in place the lever won't come out, only rotate 90 degrees. As is should.
dju

Geo99 · 07-29-2013, 02:14 AM

Zorba,

Your gun actually looks a lot better than the pictures on gunbroker. Don't know much about WWII Lugers, but it looks alright to me. Congrats - there's nothing like your first one.

If Marc doesn't have a blued mag tube for you, I do have a blued one that also has the wrong base. I 've been looking for a nickel tube for a while so I would be happy to work out a swap with you (via GT). You can PM me if you are interested.

- Geo

07-27-2013, 09:26 PM	#1
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	1940 "42" code As promised, some pix of my newly acquired Luger. I took these in high resolution, so if anyone wants to see something larger, I can probably accommodate. First three, just the display box and a bad shot of me holding it... Attached Thumbnails

07-27-2013, 09:29 PM	#2
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	More... Attached Thumbnails

07-27-2013, 09:31 PM	#3
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	Still more... Attached Thumbnails

07-27-2013, 11:04 PM	#7
Patronen User Join Date: Jun 2010 Posts: 312 Thanks: 335 Thanked 93 Times in 70 Posts	With regards to the magazine, the aluminum bottom could have been switched onto a different earlier nickled tube. The bottom looks to be one that would go with a blued tube for a 1939/42 P08. __________________ Dave

07-28-2013, 12:02 AM	#10
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,909 Thanks: 1,374 Thanked 3,110 Times in 1,510 Posts	Congratulations on a nice WW-II Mauser Luger. I particularly like these because they are so well made. If you need the little curved L shaped take down lever spring, I think you can get them from Tom Heller "lugerdoc". It slides into the bottom of the hole the take down lever fits into to provide a detent that keeps it in the locked position while firing. If it's missing, the take down lever will slide right out when you've got it in dis-assembly position. I have to check, but I may have a blue body magazine that had it's base swapped improperly from a nickel plate one. If so, I'll let you know. Perhaps we can have GT swap them for us... Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

07-27-2013, 09:34 PM	#4
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	Now the questions... I was under the impression that the "correct" magazine for this year was blued. What's up with the stamping on the inside of the RH grip? There's also something hand written that I can't make out - I might try a rubbing to see if it will come clear. From the view of holding the gun, the normal barrel proof is at the 3 O'clock position. There is another proof (Unpictured) that I just noticed at about the 10:30 position. Usual I assume.

07-27-2013, 09:46 PM	#5
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	Of course, it goes without saying that this is Hitler's/Himmler's/Goring's/Jodl's/Rommel's personal sidearm!

07-27-2013, 10:53 PM	#6
lugersrkewl Patron LugerForum Patron Join Date: Feb 2012 Location: Ussr Posts: 425 Thanks: 198 Thanked 75 Times in 58 Posts	nice ww2 piece , have you checked the internals? looks like your missing the takedown lever spring. Did it come with that case? Did you find it local or abroad?

07-27-2013, 11:50 PM	#8
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	nice luger, my first of 2 lugers was a 1940 / 42

07-28-2013, 12:03 AM	#11
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Great looking gun. I will reserve comment on the model holding the Luger . __________________ If it's made after 1918...it's a reproduction

07-28-2013, 12:12 AM	#12
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	The nail polish goes well with the P08... dju

07-28-2013, 12:32 AM	#15
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	Further fumbling popped the takedown lever out of the gun - no spring. I'll PM LugerDoc. Thanx for the sharp eyes!

07-28-2013, 01:23 AM	#16
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	With the spring in place the lever won't come out, only rotate 90 degrees. As is should. dju

07-29-2013, 02:14 AM	#17
Geo99 User Join Date: Apr 2012 Location: Whidbey Island WA Posts: 398 Thanks: 102 Thanked 125 Times in 74 Posts	Zorba, Your gun actually looks a lot better than the pictures on gunbroker. Don't know much about WWII Lugers, but it looks alright to me. Congrats - there's nothing like your first one. If Marc doesn't have a blued mag tube for you, I do have a blued one that also has the wrong base. I 've been looking for a nickel tube for a while so I would be happy to work out a swap with you (via GT). You can PM me if you are interested. - Geo