my profile |
register |
faq |
search upload photo | donate | calendar |
03-21-2017, 01:15 PM | #1 |
User
Join Date: Jan 2017
Location: S.E. Iowa
Posts: 484
Thanks: 533
Thanked 227 Times in 124 Posts
|
Shoulder stocks..what will fit?
I have a 1920 DWM commercial with stock lug.
Will any shoulder stock fit this pistol? Thanks
__________________
I Build Custom Pistol Boxes |
03-21-2017, 01:24 PM | #2 |
User
Join Date: Dec 2016
Location: Denmark
Posts: 135
Thanks: 0
Thanked 131 Times in 48 Posts
|
yes.
BTW: the rail was/is ment for fixating while hand fitting during fabrication. Only the artillery Parabellums had a stock supplied with them. |
03-21-2017, 01:57 PM | #3 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,022
Thanks: 1,090
Thanked 5,178 Times in 1,703 Posts
|
To clarify Ben's comment, do not put a stock on a 1920 Commercial...by BATFE rules that is an illegal combination as it constitutes a "short barreled rifle" under their guidelines.
__________________
If it's made after 1918...it's a reproduction |
03-21-2017, 02:02 PM | #4 | |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
|
Quote:
I don't believe that "purpose" has ever been documented- it is a "guess" at best. If that is the purpose, then how did DWM and Erfurt manage to make all those pistols without lugs??? And for sure, many Navy lugers were issued with stocks!
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
|
The following member says Thank You to DonVoigt for your post: |
03-21-2017, 02:04 PM | #5 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,909
Thanks: 1,374
Thanked 3,110 Times in 1,510 Posts
|
Tom, just owning the combination of a Luger with a stock lug and an inappropriate stock (without owning the appropriate Luger) could be considered "constructive intent" even if you never attached it.
Short Barreled Rifles (SBRs) are considered a NFA firearm, and require special transfer and licensing. Many local jurisdictions also prohibit NFA items. Marc
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
03-21-2017, 03:15 PM | #6 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
|
Thanks Ed,
I had missed seeing the one on the Finn lugers and stocks.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
03-21-2017, 03:32 PM | #7 |
User
Join Date: Aug 2008
Location: Virginia
Posts: 198
Thanks: 26
Thanked 315 Times in 112 Posts
|
Ed
The problem arises only if you own a stock and a short barreled Luger with a stock lug and do not own a Luger that is appropriate for the stock. For example, if you have a Navy stock and a Navy Luger, you can only get in trouble by actually attaching the stock to any non-Navy Luger. You can have all the other Lugers you want, just don't attach a stock to the wrong one. However, if you have a stock and only short barrel Lugers (or the wrong long one, e.g. an lP.08 and a Navy stock) then the ATF can go after you. In that case your stock could only be used to create a short-barreled rifle. Of course, you can always register a short barrel luger, pay the $200 and your stock can be used with it legally. But it's the pistol that gets registered, not the stock, so you still can't use the stock on other ones. Here it is, straight from the ATF: https://www.atf.gov/firearms/qa/if-p...possession-nfa They note that Lugers with stocks have been removed from the NFA, but that only applies to Lugers using the correct stock.
__________________
- Mike Life member: NRA, OVMS, VGCA Member: NAPCA, N-SSA(Veteran) Si vis pacem, para bellum |
03-21-2017, 03:39 PM | #8 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
Similar to the rules on auto sears and AR-15's. If you owned one auto sear and an AR 15, you were in deep trouble, regardless of whether they caught you with the rock-n-roll switch installed.
dju |
03-21-2017, 05:12 PM | #9 | |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,022
Thanks: 1,090
Thanked 5,178 Times in 1,703 Posts
|
Quote:
And yes, I am afraid of getting a wrong answer...and you should be too.
__________________
If it's made after 1918...it's a reproduction |
|
The following 11 members says Thank You to Ron Wood for your post: |
03-21-2017, 05:55 PM | #10 | |
User
Join Date: Aug 2008
Location: Virginia
Posts: 198
Thanks: 26
Thanked 315 Times in 112 Posts
|
Quote:
The same logic applies to the Finns. The barrels may be shorter, but the pistols originally were issued with stocks. A German P.08 or other short barreled Luger on the other hand would not have been originally equipped with a stock, therefore there is no original stock to be used with one. The rule isn't complicated. Most pistols that were originaly used with stocks, regardless of barrel length, have been removed from the NFA when used with their original model stock. But you can't mix and match.
__________________
- Mike Life member: NRA, OVMS, VGCA Member: NAPCA, N-SSA(Veteran) Si vis pacem, para bellum |
|
03-21-2017, 06:17 PM | #11 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,935
Thanks: 2,033
Thanked 4,533 Times in 2,093 Posts
|
Ron, I do agree with you, and could care less. I guess it's the stupidity of the rules that make my back go up, but agree, leave it alone.
|
The following 2 members says Thank You to Edward Tinker for your post: |
03-21-2017, 06:28 PM | #12 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,022
Thanks: 1,090
Thanked 5,178 Times in 1,703 Posts
|
Thanks Ed.
__________________
If it's made after 1918...it's a reproduction |
03-21-2017, 11:39 PM | #13 |
User
Join Date: Jan 2017
Location: S.E. Iowa
Posts: 484
Thanks: 533
Thanked 227 Times in 124 Posts
|
Well, that solves that! Thank you for the legal update.
__________________
I Build Custom Pistol Boxes |
|
|