Swiss 06/29 safety removal

Hardleyever · 03-19-2018, 08:31 PM

Will someone please tell me how to remove the thumb safety from the frame of a 06/29 Swiss Luger?

Thanks...Harley

alanint · 03-20-2018, 07:13 AM

Look inside the frame for a pin behind the safety lever. By driving this pin out, the safety can be removed. There is a very nice graphic of this floating around the site somewhere. Hopefully, someone with access will post it.

Ron Wood · 03-20-2018, 08:27 AM

Doug,
The 06/29 doesn't have a pin...that is one of the many changes made in that model. On the 06/29 you have to rotate the safety lever down until it clears the frame, then you can lift it out.
That was my graphic. Thanks for the compliment!

Edward Tinker · 03-20-2018, 09:47 AM

just curious, why take it out

Hardleyever · 03-20-2018, 10:28 AM

Thank you Ron. As to Ed's question....No reason for removal at present but should the need arise I don't want to be stranded lhigh and dry.

Thanks to both of you.

John Sabato · 03-20-2018, 02:44 PM

Quote:

Originally Posted by Ron Wood

Doug,
The 06/29 doesn't have a pin...that is one of the many changes made in that model. On the 06/29 you have to rotate the safety lever down until it clears the frame, then you can lift it out.
That was my graphic. Thanks for the compliment!

Hey Ron, what software did you use to make that sketch?

Ron Wood · 03-20-2018, 07:28 PM

Quote:

Originally Posted by John Sabato

Hey Ron, what software did you use to make that sketch?

You aren't going to believe this, but I used PowerPoint drawing tool and constructed the image point by point, so it was essentially free-hand. I used to have more patience than good sense...now both are in deficit!

03-19-2018, 08:31 PM	#1
Hardleyever User Join Date: Mar 2018 Posts: 14 Thanks: 3 Thanked 5 Times in 4 Posts	Swiss 06/29 safety removal Will someone please tell me how to remove the thumb safety from the frame of a 06/29 Swiss Luger? Thanks...Harley

03-20-2018, 08:27 AM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	Doug, The 06/29 doesn't have a pin...that is one of the many changes made in that model. On the 06/29 you have to rotate the safety lever down until it clears the frame, then you can lift it out. That was my graphic. Thanks for the compliment! Attached Images __________________ If it's made after 1918...it's a reproduction

03-20-2018, 07:13 AM	#2
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	Look inside the frame for a pin behind the safety lever. By driving this pin out, the safety can be removed. There is a very nice graphic of this floating around the site somewhere. Hopefully, someone with access will post it.

03-20-2018, 09:47 AM	#4
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	just curious, why take it out

03-20-2018, 10:28 AM	#5
Hardleyever User Join Date: Mar 2018 Posts: 14 Thanks: 3 Thanked 5 Times in 4 Posts	Thank you Ron. As to Ed's question....No reason for removal at present but should the need arise I don't want to be stranded lhigh and dry. Thanks to both of you.