1920 Commercial Luger~9mm

wterrell · 07-06-2002, 01:39 PM

Saw this on an auction and thought someone might want to look at it. Is described as a 'bring-back'.

http://www.auctionarms.com/search/di...temNum=2918093

ejc · 07-06-2002, 02:59 PM

I thought on comercial models serial would be marked on the bottom of the extractor and none on the clip.I read this in kenyons book, a couple of days ago.Would like to know if I am right on this. I am just getting interested in commercial models. And was wondering about other differences in placement of serial #. thanks for any help.

Lugerdoc · 07-06-2002, 04:24 PM

ejc, What you said is true. Also the hold open, firing pin, safety lever & bar will not be serialized on DWM commericals (unless reworked) and the take down lever (locking bolt) and side plate with be numbered on the lower edge. By the 1920s, they usually dropped the serial numbers from the breech block and the center toggle link.

07-06-2002, 01:39 PM	#1
wterrell User Join Date: Jun 2002 Location: Colorado Posts: 1,096 Thanks: 0 Thanked 1 Time in 1 Post	1920 Commercial Luger~9mm Saw this on an auction and thought someone might want to look at it. Is described as a 'bring-back'. http://www.auctionarms.com/search/di...temNum=2918093 __________________ Noli me vocare, ego te vocabo, wes --------------------

07-06-2002, 04:24 PM	#3
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	ejc, What you said is true. Also the hold open, firing pin, safety lever & bar will not be serialized on DWM commericals (unless reworked) and the take down lever (locking bolt) and side plate with be numbered on the lower edge. By the 1920s, they usually dropped the serial numbers from the breech block and the center toggle link. __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

07-06-2002, 02:59 PM	#2
ejc User Join Date: Jun 2002 Posts: 83 Thanks: 0 Thanked 0 Times in 0 Posts	I thought on comercial models serial would be marked on the bottom of the extractor and none on the clip.I read this in kenyons book, a couple of days ago.Would like to know if I am right on this. I am just getting interested in commercial models. And was wondering about other differences in placement of serial #. thanks for any help.