Site Details....

John D. · 06-05-2002, 11:28 AM

Hi All..!!

Thanks a million for your comments and support.! I just posted the final "Notice" on the old Forum, and closed it to posting...

OK - from the technical/programming end - I think I'm just about there - and all of you have been terrific! A couple of isses:

I need to tune the final code a bit, so you may see these Forums slow down a LOT, or even be "off-line" for a few minutes. Sorry about that - but I can't write code when the Forum is "busy"...

LugerForum patch for Avatars - John S. cam up with a terrific idea on that - but it will take a bit to get done. It can be done, though..!!

Transition. I guess it would be best to go ahead with posting a link back from the Old Forum to here. When that happens thought, only John S. and I can process the requests. Anyone there who can also help with this (you might want to feel pretty comfortable with computers to do this [img]smile.gif[/img] )

Moderators - Thor, Pete, Ron have been "voluntered" already - and John S. and I will do the overall site with DOK when he gets back. If there are other suggestions - PLEASE post back, OK?

Best to all!

John D. · 06-05-2002, 11:37 AM

And By the way - WELCOME G.T., Viggo, and all..!! It is terrific to see all of you here!

Ron Wood · 06-05-2002, 11:44 AM

John
Wow! A moderator. [img]eek.gif[/img] Guess I better ask now..What specific actions do you want a moderator to do and how do we do them? I figure we are supposed to intervene when the flames start and correct any mis-information in our respective areas when necessary. Do we have unlimited edit/delete priviledges? (Scary) Do we have any membership approval responsibilities? Sorry to front-end load the process because I know you are busier than a one-armed juggler, but I have this incredible ability to foul things up. So I thought I would ask.

Edward Tinker · 06-05-2002, 11:52 AM

I can help in whatever you need John. I am doing Security P&P right now, so I can switch between the forum and [img]mad.gif[/img] work, <img src="graemlins/roflmao.gif" border="0" alt="[hiha]" />

Ed

John D. · 06-05-2002, 11:53 AM

Hi Ron..!!!

OK - these are terrific questions. Honestly, just use your best judgement when it comes to "moderating" your Forum. If you think a person is out of line, you can post under theirs or simply contact them through the Private Message option (it's a built in e-mailing program that allows one user to "talk" to another "privatly").

Also - yes, as a "Moderator" in your Forum (Early Lugers (1900-1906) in your case, for example), you can edit or delete posts altogether. You can also make an ADMIN post which will stay at the TOP of your Forum (I'll give an example with this post). You can make any post an ADMIN post by selecting this icon:

at the bottom of any discussion thread...

Anyway - just play with some of these for right now - as you won't "break" anything - Promise!!! [img]eek.gif[/img]

Thanks to you Ron and to all of you!!!

John D. · 06-05-2002, 11:56 AM

[quote]Originally posted by Edward Tinker:
<strong>I can help in whatever you need John. I am</strong><hr></blockquote>

That would be terrific Ed..!!! OK - choose a Forum you would like to kind of watch as the moderator - and know you won't be alone, as most Forums have/will have a couple of Moderators..!

My thanks!

Edward Tinker · 06-05-2002, 12:08 PM

John, I think All P08 Military, Luger Accessories and the New Member Section I would like to assist as moderator?

But I don't have to be an expert in other fields to notice [img]mad.gif[/img] or <img src="graemlins/cussing.gif" border="0" alt="[grrrrrrr]" />

<img src="graemlins/roflmao.gif" border="0" alt="[hiha]" />

Ed

John D. · 06-05-2002, 12:12 PM

Thanks Ed..!!!

OK - you are there! Just go to those sections - and feel to "play" with some of the features, if you'd like..!

Thanks again!

Brandon · 06-05-2002, 12:13 PM

I was just looking at all the different moderators
I think it's a great idea to have people watching every corner of the forum! I may have stepped out of line sometimes at the old forum but I'll be better at this one! I tried to stay away from the old forum since I found out about this one, but this morning I had to take a "look see" and when I did I was enraged to see Timmy and Tommy armed with flame throwers! I had to say something, and I'd like to say that If I stepped out of line I'm sorry it won't happen again! [img]frown.gif[/img]

Brandon

lugerholsterrepair · 06-05-2002, 02:28 PM

John and All,

Just got the word about Luger Forum and this new site.
And just registered. lugerholsterrepair as before. Be patient with all of us, it will take time to learn "where to go" to do what!
Anyway we can "copy/paste" our old profiles??
Thanks for the "newness".
Jerry and Ellie

[quote]Originally posted by John D.:
<strong>Hi All..!!

Thanks a million for your comments and support.! I just posted the final "Notice" on the old Forum, and closed it to posting...

OK - from the technical/programming end - I think I'm just about there - and all of you have been terrific! A couple of isses:

I need to tune the final code a bit, so you may see these Forums slow down a LOT, or even be "off-line" for a few minutes. Sorry about that - but I can't write code when the Forum is "busy"...

LugerForum patch for Avatars - John S. cam up with a terrific idea on that - but it will take a bit to get done. It can be done, though..!!

Transition. I guess it would be best to go ahead with posting a link back from the Old Forum to here. When that happens thought, only John S. and I can process the requests. Anyone there who can also help with this (you might want to feel pretty comfortable with computers to do this [img]smile.gif[/img] )

Moderators - Thor, Pete, Ron have been "voluntered" already - and John S. and I will do the overall site with DOK when he gets back. If there are other suggestions - PLEASE post back, OK?

Best to all!</strong><hr></blockquote>

John D. · 06-05-2002, 02:39 PM

Hi Jerry..!

First of all - Welcome!!!

As for the "old" profiles - yes, they will stay up. However, I'm still thinking through the "role" the Old Forum will play and what "features" will still be accessible? Honestly - I hadn't thought about the Profiles issue until you brought it up - as this Forum has a different "Profile" feature.

My primary intent to to be sure that the archives and information is retained in the old system - and allow it to be able to be searched. I know I can do that - and link it into the main site.

Anyway - let me give it some thought and chat with John S. about it - and we'll see what we can do, OK?

In the meantime - it's terrific to see you over here!! <img src="graemlins/wave.gif" border="0" alt="[byebye]" />

John Sabato · 06-05-2002, 03:52 PM

John D. please check your regular email for my thoughts on profile retention.

Roadkill · 06-06-2002, 04:37 PM

Thanks.

RK

06-05-2002, 11:28 AM	#1
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Site Details.... Hi All..!! Thanks a million for your comments and support.! I just posted the final "Notice" on the old Forum, and closed it to posting... OK - from the technical/programming end - I think I'm just about there - and all of you have been terrific! A couple of isses: I need to tune the final code a bit, so you may see these Forums slow down a LOT, or even be "off-line" for a few minutes. Sorry about that - but I can't write code when the Forum is "busy"... LugerForum patch for Avatars - John S. cam up with a terrific idea on that - but it will take a bit to get done. It can be done, though..!! Transition. I guess it would be best to go ahead with posting a link back from the Old Forum to here. When that happens thought, only John S. and I can process the requests. Anyone there who can also help with this (you might want to feel pretty comfortable with computers to do this [img]smile.gif[/img] ) Moderators - Thor, Pete, Ron have been "voluntered" already - and John S. and I will do the overall site with DOK when he gets back. If there are other suggestions - PLEASE post back, OK? Best to all!

06-05-2002, 11:44 AM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,178 Times in 1,703 Posts	John Wow! A moderator. [img]eek.gif[/img] Guess I better ask now..What specific actions do you want a moderator to do and how do we do them? I figure we are supposed to intervene when the flames start and correct any mis-information in our respective areas when necessary. Do we have unlimited edit/delete priviledges? (Scary) Do we have any membership approval responsibilities? Sorry to front-end load the process because I know you are busier than a one-armed juggler, but I have this incredible ability to foul things up. So I thought I would ask. __________________ If it's made after 1918...it's a reproduction

06-05-2002, 11:52 AM	#4
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,033 Thanked 4,533 Times in 2,093 Posts	I can help in whatever you need John. I am doing Security P&P right now, so I can switch between the forum and [img]mad.gif[/img] work, <img src="graemlins/roflmao.gif" border="0" alt="[hiha]" /> Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

06-05-2002, 12:08 PM	#7
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,033 Thanked 4,533 Times in 2,093 Posts	John, I think All P08 Military, Luger Accessories and the New Member Section I would like to assist as moderator? But I don't have to be an expert in other fields to notice [img]mad.gif[/img] or <img src="graemlins/cussing.gif" border="0" alt="[grrrrrrr]" /> <img src="graemlins/roflmao.gif" border="0" alt="[hiha]" /> Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

06-05-2002, 02:28 PM	#10
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,940 Thanked 3,124 Times in 1,434 Posts	John and All, Just got the word about Luger Forum and this new site. And just registered. lugerholsterrepair as before. Be patient with all of us, it will take time to learn "where to go" to do what! Anyway we can "copy/paste" our old profiles?? Thanks for the "newness". Jerry and Ellie [quote]Originally posted by John D.: <strong>Hi All..!! Thanks a million for your comments and support.! I just posted the final "Notice" on the old Forum, and closed it to posting... OK - from the technical/programming end - I think I'm just about there - and all of you have been terrific! A couple of isses: I need to tune the final code a bit, so you may see these Forums slow down a LOT, or even be "off-line" for a few minutes. Sorry about that - but I can't write code when the Forum is "busy"... LugerForum patch for Avatars - John S. cam up with a terrific idea on that - but it will take a bit to get done. It can be done, though..!! Transition. I guess it would be best to go ahead with posting a link back from the Old Forum to here. When that happens thought, only John S. and I can process the requests. Anyone there who can also help with this (you might want to feel pretty comfortable with computers to do this [img]smile.gif[/img] ) Moderators - Thor, Pete, Ron have been "voluntered" already - and John S. and I will do the overall site with DOK when he gets back. If there are other suggestions - PLEASE post back, OK? Best to all!</strong><hr></blockquote> __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 l[email protected] 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

06-05-2002, 11:37 AM	#2
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	And By the way - WELCOME G.T., Viggo, and all..!! It is terrific to see all of you here!

06-05-2002, 11:53 AM	#5
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Hi Ron..!!! OK - these are terrific questions. Honestly, just use your best judgement when it comes to "moderating" your Forum. If you think a person is out of line, you can post under theirs or simply contact them through the Private Message option (it's a built in e-mailing program that allows one user to "talk" to another "privatly"). Also - yes, as a "Moderator" in your Forum (Early Lugers (1900-1906) in your case, for example), you can edit or delete posts altogether. You can also make an ADMIN post which will stay at the TOP of your Forum (I'll give an example with this post). You can make any post an ADMIN post by selecting this icon: at the bottom of any discussion thread... Anyway - just play with some of these for right now - as you won't "break" anything - Promise!!! [img]eek.gif[/img] Thanks to you Ron and to all of you!!!

06-05-2002, 11:56 AM	#6
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	[quote]Originally posted by Edward Tinker: <strong>I can help in whatever you need John. I am</strong><hr></blockquote> That would be terrific Ed..!!! OK - choose a Forum you would like to kind of watch as the moderator - and know you won't be alone, as most Forums have/will have a couple of Moderators..! My thanks!

06-05-2002, 12:12 PM	#8
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Thanks Ed..!!! OK - you are there! Just go to those sections - and feel to "play" with some of the features, if you'd like..! Thanks again!

06-05-2002, 12:13 PM	#9
Brandon User Join Date: Jun 2002 Location: Tennessee, USA Posts: 329 Thanks: 0 Thanked 0 Times in 0 Posts	I was just looking at all the different moderators I think it's a great idea to have people watching every corner of the forum! I may have stepped out of line sometimes at the old forum but I'll be better at this one! I tried to stay away from the old forum since I found out about this one, but this morning I had to take a "look see" and when I did I was enraged to see Timmy and Tommy armed with flame throwers! I had to say something, and I'd like to say that If I stepped out of line I'm sorry it won't happen again! [img]frown.gif[/img] Brandon

06-05-2002, 02:39 PM	#11
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Hi Jerry..! First of all - Welcome!!! As for the "old" profiles - yes, they will stay up. However, I'm still thinking through the "role" the Old Forum will play and what "features" will still be accessible? Honestly - I hadn't thought about the Profiles issue until you brought it up - as this Forum has a different "Profile" feature. My primary intent to to be sure that the archives and information is retained in the old system - and allow it to be able to be searched. I know I can do that - and link it into the main site. Anyway - let me give it some thought and chat with John S. about it - and we'll see what we can do, OK? In the meantime - it's terrific to see you over here!! <img src="graemlins/wave.gif" border="0" alt="[byebye]" />

06-05-2002, 03:52 PM	#12
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	John D. please check your regular email for my thoughts on profile retention. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

06-06-2002, 04:37 PM	#13
Roadkill User Join Date: Jun 2002 Posts: 1,632 Thanks: 1 Thanked 28 Times in 17 Posts	Thanks. RK