LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Krieghoff Lugers

Reply
Thread Tools Display Modes
Unread 08-02-2008, 01:09 PM   #1
LugerVern
User
 
LugerVern's Avatar
 
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
Default Basic HK Toggle Question

I thought I knew the answer to this but maybe not: So help please.

Are HK toggles back bored all the way or part of the way or does this vary through the years?

Attached is a picture from the toggle of a 1942 HK and clearly shows a partial back bore, but I know I have seen toggles bored all the way through on some guns-- is there a right and wrong way?

thanks

Vern
LugerVern is offline   Reply With Quote
Unread 08-02-2008, 06:47 PM   #2
LugerVern
User
 
LugerVern's Avatar
 
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
Default

Same gun with flat top 4 in the date---I am starting to have doubts about the gun and I think its not necessary to answer my question.

thanks


Vern
LugerVern is offline   Reply With Quote
Unread 09-15-2008, 02:33 PM   #3
Ida-Alp
Lifer
Lifetime Forum
Patron
 
Ida-Alp's Avatar
 
Join Date: Aug 2004
Location: Nampa ID
Posts: 116
Thanks: 81
Thanked 4 Times in 4 Posts
Default

LugerVern--I tried a search for the significance of a flat topped 4 and had no luck. Could you please explain?? Thank You--Al
Ida-Alp is offline   Reply With Quote
Unread 09-15-2008, 04:23 PM   #4
John Sabato
Lifer
Lifetime Forum
Patron
 
John Sabato's Avatar
 
Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,154
Thanks: 3,003
Thanked 2,306 Times in 1,097 Posts
Default

Vern, Not sure exactly what you are asking or what you mean by backbored, but the exterior edge of HK toggle knobs holes are "generally" chamfered or beveled... other manufacturers are not.

My Krieghoff Parabellum reference book is packed away somewhere, and so are my Luger Photo Archive CD's so I don't have any photos I can post at present to compare.

Hopefully John D. will see your post and chime in on your questions. I am no HK expert, but I do not like the year stamping in your slightly out of focus photo of the chamber area. The year digits don't seem to line up as well as I would expect an HK to appear. Do you have any better photos of this gun?
__________________
regards, -John S

"...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..."
John Sabato is offline   Reply With Quote
Unread 09-16-2008, 09:51 AM   #5
Mauser720
User
 
Mauser720's Avatar
 
Join Date: Aug 2007
Location: Kansas
Posts: 535
Thanks: 18
Thanked 49 Times in 33 Posts
Default

Vern -

I think I see what you are pointing out in reference to the chamber date. On page 109 of Gibson's book there is a photograph of a 1942 chamber date. In the photograph you posted, I think that in addition to the "4" looking strange as you have pointed out, the number "2" is also very suspicious looking when compared to the photograph in Gibson's book. And maybe it is just the way the lighting affects the picture; however, it appears the base of the "9" extends too far below the base-line of the date. In Gibson's book it appears that the base-line of the 1942 date is perfectly straight.

Thank you for sharing.

Mauser720 - Ron
__________________
Mauser720 - Ron
"Those who do not know history are doomed to repeat it."
Mauser720 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:35 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com