Navy Luger Board.

A.Mifsin · 07-28-2011, 11:27 AM

I searched about Navy Luger Boards in old threads, but I could not find a good photo of a Navy Board since for some reason the pictures were not visible.

My friend bought a Navy Luger Board and the locking lever is strawed, since I never saw an original board before I do not know if this is correct or not. The disk is marked C/M and infront of the disk there is the serial number, condition is, in my Opinion, very good. Is this correct for this board? I mean the lever being straw colour.

Jan C Still, Imperial Lugers and their Accesories Page 186, does not give much information.
thanks.
Alf.

lugerholsterrepair · 07-28-2011, 11:31 AM

Alf, Yes a strawed lever is correct. I would be happy to look at the stock if you would like to send photo's..

[email protected]

A.Mifsin · 07-28-2011, 11:36 AM

Thank You Jerry, I try to get some photos, as I said it is not mine.
Alf.

lugerholsterrepair · 07-28-2011, 11:41 AM

Alf, do you know if there is a serial # on the stock iron? If I can get some good photo's I can tell your Friend if it's original or not.

A.Mifsin · 07-28-2011, 12:08 PM

The serial number is on the wood infront of the disk. I didn't check if thers is serial number on the iron, should there be one?
Alf.

lugerholsterrepair · 07-28-2011, 12:21 PM

Alf, I would need to see the number in the wood..I never like anything stamped in the wood except Anchor M or other type Navy indicators. Serial numbers or dates etc are usually a bad sign.
Yes, There should be a serial number stamped in the stock iron..just like an Artillery stock. Will likely have no suffix or an A suffix.
The stock iron or the steel disc is where you see most of the stampings although there are others ...
The type of wood/grain is a strong factor.

A.Mifsin · 07-28-2011, 12:46 PM

Ok Jerry, Thanks for the info. I will try to get as much as photos as I can, I hope by next week when I visit my friend again.
Alf.

lugerholsterrepair · 07-28-2011, 12:53 PM

Alf..OK! I look forward to it! I always like to look at original Navy stocks..Let's hope it is one.

A.Mifsin · 07-28-2011, 01:01 PM

Quote:

Originally Posted by lugerholsterrepair

Alf..OK! I look forward to it! I always like to look at original Navy stocks..Let's hope it is one.

Even I, I hope so, since I know that these board are hard to find.
Alf.

spartacus38 · 07-28-2011, 02:04 PM

Original Navy stocks are hard to find.it took me 8 years to find my first one.
Bob

A.Mifsin · 07-28-2011, 02:08 PM

Quote:

Originally Posted by spartacus38

Original Navy stocks are hard to find.it took me 8 years to find my first one.
Bob

That is what I am afraid off.

Alf.

A.Mifsin · 07-30-2011, 03:02 AM

I have just recieved this photo from my friend, I will take some more next week.
Alf.

sheepherder · 07-30-2011, 07:31 AM

Quote:

Originally Posted by A.Mifsin

I searched about Navy Luger Boards in old threads, but I could not find a good photo of a Navy Board since for some reason the pictures were not visible.

A classic example of why LugerForum asks that all pics be uploaded directly to the Forum!!!

A.Mifsin · 08-06-2011, 12:00 PM

Ok, here are some photos taken this morning, I also took some photos of two cleaning rods and three mag pouches for your comments. Your comments is appeciated.

Alf.

A.Mifsin · 08-06-2011, 12:02 PM

More Photos...

pors12 · 08-06-2011, 01:34 PM

Hello,

Here is my stock.
It is matching my navy luger.

regards

Otto

A.Mifsin · 08-06-2011, 01:41 PM

Hi Thank you for thr photos, can you show a closeup of the front iron please ?
Alf

pors12 · 08-06-2011, 01:46 PM

Here they are, if you need more pics just tell me.

Otto

lugerholsterrepair · 08-06-2011, 02:43 PM

Alf..The Navy stock..It is a little troubling in places. The stock iron for instance. No serial number and awfully new looking. It does fit properly though..The locking lever looks high polish and strong bright straw..Could just be the photo's.

I wonder why a hole was bored into the steel marking disc? Otherwise it looks OK. I don't quite know what to make of it yet...

The 2 rod tops look alright.

The double magazine pouches..the 2 black Navy types are not Imperial but Portugese.
The one with the back belt loop is an Artillery.

A.Mifsin · 08-06-2011, 02:50 PM

Thank You. Yes the locking lever is bright yellow, even I noticed that. The disk is in my opion installed recently, you can see the end of the pin disk on the other side of the boad, but as I said I only saw a couple of navy board, so I can't be judge of this one.
Alf.

07-28-2011, 11:27 AM	#1
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	Navy Luger Board. I searched about Navy Luger Boards in old threads, but I could not find a good photo of a Navy Board since for some reason the pictures were not visible. My friend bought a Navy Luger Board and the locking lever is strawed, since I never saw an original board before I do not know if this is correct or not. The disk is marked C/M and infront of the disk there is the serial number, condition is, in my Opinion, very good. Is this correct for this board? I mean the lever being straw colour. Jan C Still, Imperial Lugers and their Accesories Page 186, does not give much information. thanks. Alf. __________________ I prefer a Luger

07-28-2011, 11:31 AM	#2
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,940 Thanked 3,124 Times in 1,434 Posts	Alf, Yes a strawed lever is correct. I would be happy to look at the stock if you would like to send photo's.. [email protected] __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 l[email protected] 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-28-2011, 11:36 AM	#3
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	Thank You Jerry, I try to get some photos, as I said it is not mine. Alf. __________________ I prefer a Luger

07-28-2011, 11:41 AM	#4
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,940 Thanked 3,124 Times in 1,434 Posts	Alf, do you know if there is a serial # on the stock iron? If I can get some good photo's I can tell your Friend if it's original or not. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 l[email protected] 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-28-2011, 12:08 PM	#5
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	The serial number is on the wood infront of the disk. I didn't check if thers is serial number on the iron, should there be one? Alf. __________________ I prefer a Luger

07-28-2011, 12:21 PM	#6
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,940 Thanked 3,124 Times in 1,434 Posts	Alf, I would need to see the number in the wood..I never like anything stamped in the wood except Anchor M or other type Navy indicators. Serial numbers or dates etc are usually a bad sign. Yes, There should be a serial number stamped in the stock iron..just like an Artillery stock. Will likely have no suffix or an A suffix. The stock iron or the steel disc is where you see most of the stampings although there are others ... The type of wood/grain is a strong factor. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 l[email protected] 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-28-2011, 12:46 PM	#7
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	Ok Jerry, Thanks for the info. I will try to get as much as photos as I can, I hope by next week when I visit my friend again. Alf. __________________ I prefer a Luger

07-28-2011, 12:53 PM	#8
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,940 Thanked 3,124 Times in 1,434 Posts	Alf..OK! I look forward to it! I always like to look at original Navy stocks..Let's hope it is one. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 l[email protected] 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-28-2011, 02:04 PM	#10
spartacus38 Patron LugerForum Patron Join Date: Jun 2003 Location: South Lake Tahoe,CA. Posts: 695 Thanks: 0 Thanked 70 Times in 56 Posts	Original Navy stocks are hard to find.it took me 8 years to find my first one. Bob

07-30-2011, 03:02 AM	#12
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	I have just recieved this photo from my friend, I will take some more next week. Alf. Attached Thumbnails __________________ I prefer a Luger

08-06-2011, 12:00 PM	#14
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	Ok, here are some photos taken this morning, I also took some photos of two cleaning rods and three mag pouches for your comments. Your comments is appeciated. Alf. Attached Thumbnails __________________ I prefer a Luger

08-06-2011, 12:02 PM	#15
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	More Photos... Attached Thumbnails __________________ I prefer a Luger

08-06-2011, 01:34 PM	#16
pors12 User Join Date: Feb 2011 Location: Austria Posts: 115 Thanks: 24 Thanked 59 Times in 21 Posts	Hi Hello, Here is my stock. It is matching my navy luger. regards Otto Attached Thumbnails

08-06-2011, 01:41 PM	#17
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	Hi Thank you for thr photos, can you show a closeup of the front iron please ? Alf __________________ I prefer a Luger

08-06-2011, 01:46 PM	#18
pors12 User Join Date: Feb 2011 Location: Austria Posts: 115 Thanks: 24 Thanked 59 Times in 21 Posts	Front Here they are, if you need more pics just tell me. Otto Attached Thumbnails

08-06-2011, 02:43 PM	#19
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,940 Thanked 3,124 Times in 1,434 Posts	Alf..The Navy stock..It is a little troubling in places. The stock iron for instance. No serial number and awfully new looking. It does fit properly though..The locking lever looks high polish and strong bright straw..Could just be the photo's. I wonder why a hole was bored into the steel marking disc? Otherwise it looks OK. I don't quite know what to make of it yet... The 2 rod tops look alright. The double magazine pouches..the 2 black Navy types are not Imperial but Portugese. The one with the back belt loop is an Artillery. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 l[email protected] 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

08-06-2011, 02:50 PM	#20
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 12 Times in 12 Posts	Thank You. Yes the locking lever is bright yellow, even I noticed that. The disk is in my opion installed recently, you can see the end of the pin disk on the other side of the boad, but as I said I only saw a couple of navy board, so I can't be judge of this one. Alf. __________________ I prefer a Luger