Yes's and No's of shooting and ammo types

Dr.Mauser · 07-02-2014, 08:29 PM

With my recent acquisition of my first P08, what and the Dr's and don'ts of shooting it. Such as, best ammo types, steel case or brass, and best types of loads?

ithacaartist · 07-03-2014, 10:44 AM

If it's 9mm, then Winchester white box, Sellier and Bellot, and Fiocchi in 115 gr or 124 gr, FMJ are the standard "yesses" for the P.08. The "no" would be anything hot, such as +p, +p+. or anything marked NATO. These tend to be too powerful and can damage your pistol. Steel cases can be problematic, so stick with brass. I've used aluminum cases in a couple of my other guns in .32 and .380, and they did fine, so also a possible option for Lugers if it's the same otherwise. It's good policy to outfit the shooter with a fresh set of springs. If yours proves cranky, let us know because there may be a fix for whatever ails it. I believe some extreme problems are sometimes solved with a custom load, specific to the pistol, and experimenting with the load, within reasonable parameters, will fine tune the point of impact.

If it's 7.65mm, then the S&B and Fiocchi are the standard. US made .30 Luger ammo is scarce and more than double the price per round of the imports, but if you can find and afford it, it should do OK, although I've heard rumors about Remington's alleged feeding problems. Many who shoot it reload, both to save money and tune their actions and performance. It would mean an initial outlay in the neighborhood of a handful of Ben Franklins for equipment and supplies, but it can be very satisfying in its results; and if you shoot quite a bit, it'll save a buttload of dough.

I think that's it, for the basics. Others will add more details, if necessary.

DavidJayUden · 07-03-2014, 11:15 AM

Like David said, Winchester white box ammo. Get a Mec-Gar magazine, and clean and lube the gun properly prior to shooting. Don't stuff the mag. clear full. Grip the gun tightly, not loose or limp.
If this is the first time shooting that gun, load just one round a couple of times, then 2, etc. just until you are comfortable what it functions correctly, and visually inspect the gun after each round for the first few shots.
And most importantly of all, give us a range report.
dju

mrerick · 07-03-2014, 11:23 AM

While we generally recommend the Winchester White Box ammo (115gn) there is nothing particularly magic about this brand.

You want either a 115gn or 124gn full metal jacket bullet in a standard velocity loading. Many manufacturers make 9mm Luger ammunition like this. Each uses a slightly different combination of primer and powder behind the bullet. They also may load to slightly different overall lengths. All of this affects the ignition pressure curve and ultimately the cycling of your firearm. It isn't magic, but it can be sensitive. Winchester loads their own FMJ 115gn bullets into their own cases using their own Winchester small pistol primers and Winchester 231 (Hodgen HP-38) powder.

If you have good operation and cycling using the Winchester white box ammo, stick to this.

If you have difficulty, ensure that the Luger is operating smoothly and is properly lubricated, then pay attention to your grip and hand / wrist / arm support. The recoil of a Luger must encounter the proper support resistance to cycle properly.

The thing to absolutely avoid in a vintage Luger is higher velocity ammunition. +P and surplus sub-machine gun or NATO power ammunition is to be absolutely avoided. You'll probably damage something.

The Luger grip angle and vertical ejection characteristics are rather unique and quite comfortable for accurate shooting. I think you'll enjoy it.

Zorba · 07-03-2014, 01:33 PM

I've had good results with WWB, PMC, Magtech, Blazer Brass, and Freedom Munitions. YMMV.

I also bought a couple hundred rounds of 115gr FMJ reloads using "Bayou Bullets" which are SA-WEET.

The one (exactly one, count it) steel cased Nazi round I shot went bang like the rest, and the ancient iron core bullet exited the pistol in great haste...

rhuff · 07-03-2014, 08:04 PM

The fellas have covered everything you need to know in an expert fashion. Heed their suggestions and you should do fine. Let us know how things work out. Many times, if you do your part, these Lugers are scary accurate!!

sheepherder · 07-03-2014, 08:19 PM

Well, nobody else has mentioned it, but I'll throw in my oddball $.02 worth...

Wear oversize safety glasses, a baseball cap (or western Stetson if you are in Occupied Mexico), and a shirt that you can button up the collar fairly snug...

It's been my experience that Luger P-08's/LP-08's, Mauser C96's/M30's, and Nambu T-14's eject fired cartridge cases straight up and back...Most of mine hit me square in the forehead, but several friends have gotten hot cases down their necks...

mrerick · 07-03-2014, 09:08 PM

I always warn my students when they show up for class with open collars... it's particularly risky for some of the women.

Still - every so often, you hear someone on the range yell "hot brass!!!"...

Marc

saab-bob · 07-03-2014, 10:05 PM

I usually wear a baseball style cap when shooting a luger or a C96.The spent shells land on the cap bill.

Awhile back I was walking thru the living room and my daughter was watching "The Kardashian Show". One of the gals was learning to shoot a pistol( a SIG?) and a spent shell dropped right down her low cut blouse!

Now thats reality TV!

I also noticed that 4 inch high heels make a very unstable platform for target placement.

Bob

sheepherder · 07-04-2014, 08:21 PM

Quote:

Originally Posted by saab-bob

...my daughter was watching "The Kardashian Show". One of the gals was learning to shoot a pistol...

Now, that is scary...That any Kardashian would be allowed to handle a deadly weapon...

Dr.Mauser · 07-05-2014, 08:32 AM

Quote:

Originally Posted by sheepherder

Now, that is scary...That any Kardashian would be allowed to handle a deadly weapon...

Haha I'd have to agree. Thank you all for the information! The buyer informed me that before listing the luger he put all new springs in her for me, put I do plan on buying a set from wolf as well. Aside from a Holster and rzm marked lanyard 3 or 4 mec-gar mags are on my to do list. No +p, +p+, hot loads, NATO marked or mil-surp sub gun ammo, check. I really appreciate all the help and info and yes, yes you drooling devils will get a range report once I'm able to get it out to the range. I'm living in Modesto, Ca until Tuesday, then it's back to the great state of Utah forever!!!

As far as shooting goes I usually wear an SS M43 feldmütze with the bill pinched to a nice sloppy V to the range with my original tortoise shell sunglasses because hot brass in your face isn't the key to a fun time, but having German gear like that is just an added perk to being a collector and WWII reenactor

MikeP · 07-05-2014, 06:43 PM

Some thinking exists that steel cases are particularly hard on extractors.

Zorba · 07-05-2014, 09:26 PM

Quote:

Originally Posted by MikeP

Some thinking exists that steel cases are particularly hard on extractors.

I assume the Nazis didn't particularly care, all things considered.

Dr.Mauser · 07-06-2014, 12:47 AM

Quote:

Originally Posted by zormpas

I assume the Nazis didn't particularly care, all things considered.

I agree haha from what I remember they used almost only steel case ammo didn't they?

saab-bob · 07-11-2014, 08:03 PM

Just a heads up!

Just got a E-mail blast that Midway USA has Fiocchi .30 Luger ammo in stock.
Price is almost normal.Not the easiest ammo to find.

http://www.midwayusa.com/?cm_mmc=pe_...MidwayUSA_logo
Take care!
Bob

Sieger · 10-05-2014, 01:50 AM

Quote:

Originally Posted by zormpas

I assume the Nazis didn't particularly care, all things considered.

Hi,

The steel cased stuff was marked for Schmeissers, not pistols.

Sieger

Sergio Natali · 10-05-2014, 08:31 AM

quote: Wear oversize safety glasses, a baseball cap (or western Stetson if you are in Occupied Mexico), and a shirt that you can button up the collar fairly snug...

It's been my experience that Luger P-08's/LP-08's, Mauser C96's/M30's, and Nambu T-14's eject fired cartridge cases straight up and back...Most of mine hit me square in the forehead, but several friends have gotten hot cases down their necks...
unquote

Absolutely right: I awlays use a baseball sort of cap and glasses everytime I go shooting, still some years ago a very hot ejected brass somehow went between my glasses and my face, and for some time I went around with a burn mark under my right eye.

nukem556 · 10-05-2014, 07:20 PM

Don't shoot prone with a guy on your left using a M1 Garand....that big 'ol .30-06 case will sear your skin and stick to it.....ask how I know !

S.B. · 10-10-2014, 09:34 PM

Quote:

Originally Posted by mrerick

While we generally recommend the Winchester White Box ammo (115gn) there is nothing particularly magic about this brand.

You want either a 115gn or 124gn full metal jacket bullet in a standard velocity loading. Many manufacturers make 9mm Luger ammunition like this. Each uses a slightly different combination of primer and powder behind the bullet. They also may load to slightly different overall lengths. All of this affects the ignition pressure curve and ultimately the cycling of your firearm. It isn't magic, but it can be sensitive. Winchester loads their own FMJ 115gn bullets into their own cases using their own Winchester small pistol primers and Winchester 231 (Hodgen HP-38) powder.

If you have good operation and cycling using the Winchester white box ammo, stick to this.

If you have difficulty, ensure that the Luger is operating smoothly and is properly lubricated, then pay attention to your grip and hand / wrist / arm support. The recoil of a Luger must encounter the proper support resistance to cycle properly.

The thing to absolutely avoid in a vintage Luger is higher velocity ammunition. +P and surplus sub-machine gun or NATO power ammunition is to be absolutely avoided. You'll probably damage something.

The Luger grip angle and vertical ejection characteristics are rather unique and quite comfortable for accurate shooting. I think you'll enjoy it.

Please, don't stop there, give us handloaders something to load in our Lugers?
I've a lot of Winchester 231 on hand but, how much with 115 and 124 grain bullets?
Steve

07-02-2014, 08:29 PM	#1
Dr.Mauser User Join Date: Nov 2012 Location: The Greatest State in the Union Posts: 29 Thanks: 0 Thanked 0 Times in 0 Posts	Yes's and No's of shooting and ammo types With my recent acquisition of my first P08, what and the Dr's and don'ts of shooting it. Such as, best ammo types, steel case or brass, and best types of loads?

07-03-2014, 10:44 AM	#2
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,347 Thanks: 7,285 Thanked 2,579 Times in 1,366 Posts	If it's 9mm, then Winchester white box, Sellier and Bellot, and Fiocchi in 115 gr or 124 gr, FMJ are the standard "yesses" for the P.08. The "no" would be anything hot, such as +p, +p+. or anything marked NATO. These tend to be too powerful and can damage your pistol. Steel cases can be problematic, so stick with brass. I've used aluminum cases in a couple of my other guns in .32 and .380, and they did fine, so also a possible option for Lugers if it's the same otherwise. It's good policy to outfit the shooter with a fresh set of springs. If yours proves cranky, let us know because there may be a fix for whatever ails it. I believe some extreme problems are sometimes solved with a custom load, specific to the pistol, and experimenting with the load, within reasonable parameters, will fine tune the point of impact. If it's 7.65mm, then the S&B and Fiocchi are the standard. US made .30 Luger ammo is scarce and more than double the price per round of the imports, but if you can find and afford it, it should do OK, although I've heard rumors about Remington's alleged feeding problems. Many who shoot it reload, both to save money and tune their actions and performance. It would mean an initial outlay in the neighborhood of a handful of Ben Franklins for equipment and supplies, but it can be very satisfying in its results; and if you shoot quite a bit, it'll save a buttload of dough. I think that's it, for the basics. Others will add more details, if necessary. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

07-03-2014, 11:23 AM	#4
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,909 Thanks: 1,374 Thanked 3,110 Times in 1,510 Posts	While we generally recommend the Winchester White Box ammo (115gn) there is nothing particularly magic about this brand. You want either a 115gn or 124gn full metal jacket bullet in a standard velocity loading. Many manufacturers make 9mm Luger ammunition like this. Each uses a slightly different combination of primer and powder behind the bullet. They also may load to slightly different overall lengths. All of this affects the ignition pressure curve and ultimately the cycling of your firearm. It isn't magic, but it can be sensitive. Winchester loads their own FMJ 115gn bullets into their own cases using their own Winchester small pistol primers and Winchester 231 (Hodgen HP-38) powder. If you have good operation and cycling using the Winchester white box ammo, stick to this. If you have difficulty, ensure that the Luger is operating smoothly and is properly lubricated, then pay attention to your grip and hand / wrist / arm support. The recoil of a Luger must encounter the proper support resistance to cycle properly. The thing to absolutely avoid in a vintage Luger is higher velocity ammunition. +P and surplus sub-machine gun or NATO power ammunition is to be absolutely avoided. You'll probably damage something. The Luger grip angle and vertical ejection characteristics are rather unique and quite comfortable for accurate shooting. I think you'll enjoy it. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

07-03-2014, 08:19 PM	#7
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,183 Thanks: 1,400 Thanked 4,442 Times in 2,330 Posts	Well, nobody else has mentioned it, but I'll throw in my oddball $.02 worth... Wear oversize safety glasses, a baseball cap (or western Stetson if you are in Occupied Mexico), and a shirt that you can button up the collar fairly snug... It's been my experience that Luger P-08's/LP-08's, Mauser C96's/M30's, and Nambu T-14's eject fired cartridge cases straight up and back...Most of mine hit me square in the forehead, but several friends have gotten hot cases down their necks... __________________ I like my coffee the way I like my women... ...Cold and bitter...

07-03-2014, 09:08 PM	#8
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,909 Thanks: 1,374 Thanked 3,110 Times in 1,510 Posts	I always warn my students when they show up for class with open collars... it's particularly risky for some of the women. Still - every so often, you hear someone on the range yell "hot brass!!!"... Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

07-03-2014, 11:15 AM	#3
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	Like David said, Winchester white box ammo. Get a Mec-Gar magazine, and clean and lube the gun properly prior to shooting. Don't stuff the mag. clear full. Grip the gun tightly, not loose or limp. If this is the first time shooting that gun, load just one round a couple of times, then 2, etc. just until you are comfortable what it functions correctly, and visually inspect the gun after each round for the first few shots. And most importantly of all, give us a range report. dju

07-03-2014, 01:33 PM	#5
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	I've had good results with WWB, PMC, Magtech, Blazer Brass, and Freedom Munitions. YMMV. I also bought a couple hundred rounds of 115gr FMJ reloads using "Bayou Bullets" which are SA-WEET. The one (exactly one, count it) steel cased Nazi round I shot went bang like the rest, and the ancient iron core bullet exited the pistol in great haste...

07-03-2014, 08:04 PM	#6
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,291 Thanks: 2,709 Thanked 972 Times in 717 Posts	The fellas have covered everything you need to know in an expert fashion. Heed their suggestions and you should do fine. Let us know how things work out. Many times, if you do your part, these Lugers are scary accurate!!

07-03-2014, 10:05 PM	#9
saab-bob User Join Date: Jul 2009 Location: So Cal Posts: 459 Thanks: 774 Thanked 143 Times in 87 Posts	I usually wear a baseball style cap when shooting a luger or a C96.The spent shells land on the cap bill. Awhile back I was walking thru the living room and my daughter was watching "The Kardashian Show". One of the gals was learning to shoot a pistol( a SIG?) and a spent shell dropped right down her low cut blouse! Now thats reality TV! I also noticed that 4 inch high heels make a very unstable platform for target placement. Bob __________________ "I think,therefore I own guns"

07-05-2014, 06:43 PM	#12
MikeP User Join Date: Jun 2002 Location: ILL Posts: 686 Thanks: 36 Thanked 452 Times in 198 Posts	Some thinking exists that steel cases are particularly hard on extractors.

07-11-2014, 08:03 PM	#15
saab-bob User Join Date: Jul 2009 Location: So Cal Posts: 459 Thanks: 774 Thanked 143 Times in 87 Posts	Just a heads up! Just got a E-mail blast that Midway USA has Fiocchi .30 Luger ammo in stock. Price is almost normal.Not the easiest ammo to find. http://www.midwayusa.com/?cm_mmc=pe_...MidwayUSA_logo Take care! Bob __________________ "I think,therefore I own guns"

10-05-2014, 08:31 AM	#17
Sergio Natali User Join Date: Feb 2013 Location: Somewhere in Northern Italy Posts: 2,646 Thanks: 1,082 Thanked 1,783 Times in 1,007 Posts	quote: Wear oversize safety glasses, a baseball cap (or western Stetson if you are in Occupied Mexico), and a shirt that you can button up the collar fairly snug... It's been my experience that Luger P-08's/LP-08's, Mauser C96's/M30's, and Nambu T-14's eject fired cartridge cases straight up and back...Most of mine hit me square in the forehead, but several friends have gotten hot cases down their necks... unquote Absolutely right: I awlays use a baseball sort of cap and glasses everytime I go shooting, still some years ago a very hot ejected brass somehow went between my glasses and my face, and for some time I went around with a burn mark under my right eye. __________________ "Originality can't be restored and should be at the top of any collector's priority list.

10-05-2014, 07:20 PM	#18
nukem556 User Join Date: Jul 2010 Location: Irmo, SC Posts: 625 Thanks: 35 Thanked 168 Times in 107 Posts	Don't shoot prone with a guy on your left using a M1 Garand....that big 'ol .30-06 case will sear your skin and stick to it.....ask how I know !