1937 LONGBARRELED MAUSER?

cirelaw · 07-30-2004, 09:13 AM

I BOUGHT A 1937 DATED COMMERCIAL MAUSER, SR#5252V, ON BARREL AND CLIP, CROWN/U ON BARREL AND INSIDE SIDE PLATE, "351" ON UNDERSIDE OF BARREL, POSSIBLY LATVIAN? CONTACT ERIC AT [email protected] FOR CLOSUPS TKS

Lugerdoc · 07-30-2004, 10:09 AM

Eric, If the C/U under the barrel is narrower than the similar marks on the receiver, this maybe an E.German addition. If so, the 351 marking below if would incidacate that this barrel was added in March of 1951. TH

cirelaw · 08-01-2004, 10:55 AM

MY MISTAKE A SMALLER 381 ABOVE A LARGER 5252, ILL EMAIL YOU PICS ERIC TKS

Vlim · 08-01-2004, 01:14 PM

Hi,

Is the 381 on the barrel not an 8.81? This would make sense as the actual diameter in cm was struck on the barrel.

Pete Ebbink · 08-01-2004, 10:20 PM

Hi Eric,

If you cannot figure out the photo-posting routine on the LF, I would be happy to post them for you. Just send me your jpegs and I will post them for you in this discussion thread.

Don't worry about file size. I can make them fit the 180 KB limit, if needed.

Email to : "[email protected]"

Regards,

Pete... <img border="0" alt="[typing]" title="" src="graemlins/yltype.gif" />

Edward Tinker · 08-01-2004, 10:44 PM

Pete, here are the pictures, Eric sent them to me last week. Sorry I didn't post them here Eric, didn't know that is what you wanted.

Ed

cirelaw · 08-02-2004, 10:42 PM

this is eric, i want to thank you both for you kindness, i'll ship the luger to either of you for inspection tks again eric, esq.

Ron Wood · 08-03-2004, 12:24 AM

esq.! Now your "handle" can be decoded! Pretty clever.

A clear closeup of the serial number on the front of the frame and the serial number and markings on the bottom of the barrel would be a big help in analyzing your Luger, and might preclude the necessity of shipping it to someone for inspection/evaluation.

Edward Tinker · 08-03-2004, 12:46 AM

Ron, I told him I would be glad to see his gun, as it looks like a nice one to me, but I think the best thing is to supply a few more pictures of close ups.

Ed

cirelaw · 08-04-2004, 06:02 AM

I BE MORE THAN HAPPY TO SEND CLOSEUP, JUST EMAIL [email protected], I CAN EVEN SEND THE LUGER FOR INSPECTION ERIC 772-336-5312

cirelaw · 08-04-2004, 06:01 PM

RON, PLS GIVE ME YOU EMAIL ADDRESS I HAVE PICTURES, CLOSUPS AND ANOTHER LUGER, CARTURED MY MAJOR CANTEBURY OF A LUGHER BELONGING TO THE SS OSLO GARRISON COMANDEROR CALL ERIC 772-336-5312, IM PRESENTLY BUYING THE 1906 FRENCH COMMERCIAL FROM TOM AT PHOENIXINVESTMENTARMS.COM AND THANK YOU FOR YOUR ADVICE, JUST SAYSO AND ILL SHIP MY 1937 MAUSER TO YOU FOR INSPECTION, ERIC

cirelaw · 08-26-2004, 06:55 AM

ERIC HERE, IM INTERESTD IN ACQUIRIMG A 1920 CARBINE, IM ALREADY PURCHASING THE 1906 FRENCH COMMERCIAL FROM TOM AT PHOENIXINVESTMENTARMS.COM IM WILLING TO TRADE MY 1937 MAUSER OBERNDORF FOR A 1920 CARBINE, PLUS SOME CASH, IF ANYBODY IS INTERESTED, CONTACT ERIC 772-336-5312 OR [email protected], I HAVE NEW CLOSEUPS, AND TKS TO THE LUGERFORUM FOR YOUR HELP, ERIC BRUNING J.D.

07-30-2004, 09:13 AM	#1
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	1937 LONGBARRELED MAUSER? I BOUGHT A 1937 DATED COMMERCIAL MAUSER, SR#5252V, ON BARREL AND CLIP, CROWN/U ON BARREL AND INSIDE SIDE PLATE, "351" ON UNDERSIDE OF BARREL, POSSIBLY LATVIAN? CONTACT ERIC AT [email protected] FOR CLOSUPS TKS

07-30-2004, 10:09 AM	#2
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Eric, If the C/U under the barrel is narrower than the similar marks on the receiver, this maybe an E.German addition. If so, the 351 marking below if would incidacate that this barrel was added in March of 1951. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 [email protected]

08-01-2004, 10:44 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	Pete, here are the pictures, Eric sent them to me last week. Sorry I didn't post them here Eric, didn't know that is what you wanted. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-03-2004, 12:24 AM	#8
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,179 Times in 1,703 Posts	esq.! Now your "handle" can be decoded! Pretty clever. A clear closeup of the serial number on the front of the frame and the serial number and markings on the bottom of the barrel would be a big help in analyzing your Luger, and might preclude the necessity of shipping it to someone for inspection/evaluation. __________________ If it's made after 1918...it's a reproduction

08-03-2004, 12:46 AM	#9
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,935 Thanks: 2,034 Thanked 4,533 Times in 2,093 Posts	Ron, I told him I would be glad to see his gun, as it looks like a nice one to me, but I think the best thing is to supply a few more pictures of close ups. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-01-2004, 10:55 AM	#3
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	MY MISTAKE A SMALLER 381 ABOVE A LARGER 5252, ILL EMAIL YOU PICS ERIC TKS

08-01-2004, 01:14 PM	#4
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,989 Times in 1,205 Posts	Hi, Is the 381 on the barrel not an 8.81? This would make sense as the actual diameter in cm was struck on the barrel.

08-01-2004, 10:20 PM	#5
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Hi Eric, If you cannot figure out the photo-posting routine on the LF, I would be happy to post them for you. Just send me your jpegs and I will post them for you in this discussion thread. Don't worry about file size. I can make them fit the 180 KB limit, if needed. Email to : "[email protected]" Regards, Pete... <img border="0" alt="[typing]" title="" src="graemlins/yltype.gif" />

08-02-2004, 10:42 PM	#7
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	this is eric, i want to thank you both for you kindness, i'll ship the luger to either of you for inspection tks again eric, esq.

08-04-2004, 06:02 AM	#10
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	I BE MORE THAN HAPPY TO SEND CLOSEUP, JUST EMAIL [email protected], I CAN EVEN SEND THE LUGER FOR INSPECTION ERIC 772-336-5312

08-04-2004, 06:01 PM	#11
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	RON, PLS GIVE ME YOU EMAIL ADDRESS I HAVE PICTURES, CLOSUPS AND ANOTHER LUGER, CARTURED MY MAJOR CANTEBURY OF A LUGHER BELONGING TO THE SS OSLO GARRISON COMANDEROR CALL ERIC 772-336-5312, IM PRESENTLY BUYING THE 1906 FRENCH COMMERCIAL FROM TOM AT PHOENIXINVESTMENTARMS.COM AND THANK YOU FOR YOUR ADVICE, JUST SAYSO AND ILL SHIP MY 1937 MAUSER TO YOU FOR INSPECTION, ERIC

08-26-2004, 06:55 AM	#12
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	ERIC HERE, IM INTERESTD IN ACQUIRIMG A 1920 CARBINE, IM ALREADY PURCHASING THE 1906 FRENCH COMMERCIAL FROM TOM AT PHOENIXINVESTMENTARMS.COM IM WILLING TO TRADE MY 1937 MAUSER OBERNDORF FOR A 1920 CARBINE, PLUS SOME CASH, IF ANYBODY IS INTERESTED, CONTACT ERIC 772-336-5312 OR [email protected], I HAVE NEW CLOSEUPS, AND TKS TO THE LUGERFORUM FOR YOUR HELP, ERIC BRUNING J.D.